ZL1 side skirts & ZL1 Rear diffuser Done >> - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

usranger80 · 07-15-2013, 10:18 PM

Just picked these up too, needed to see them on a Camaro to make up my mind and the other ones I ordered were back ordered over a month. Did you weld these or bolt on?

Quote:

Originally Posted by 01pewterz28

If anyone is looking for the exhaust tips this is where I picked mine up at thanks to Blackbat for the hook up.

http://www.ebay.com/itm/YONAKA-BMW-E...ht_3369wt_1162

01pewterz28 · 07-16-2013, 10:23 AM

Quote:

Originally Posted by usranger80

Just picked these up too, needed to see them on a Camaro to make up my mind and the other ones I ordered were back ordered over a month. Did you weld these or bolt on?

Bolted them on no need to weld them

TwentyTen2SSRS · 07-17-2013, 03:18 PM

So diffuser was $500 painted and shipped?

whemming · 07-17-2013, 03:48 PM

I like it. I think you should stop now..looks perfect

Is it lowered? hard to tell, but if its not lowered already, I would drop her an inch

01pewterz28 · 07-17-2013, 07:30 PM

Quote:

Originally Posted by whemming

I like it. I think you should stop now..looks perfect

Is it lowered? hard to tell, but if its not lowered already, I would drop her an inch

Thanks I am done nothing else to the exterior will be done. Yes it's lowered 1.25" from stock I have OEM ZL1 springs on.

Thanks

usranger80 · 07-17-2013, 09:50 PM

If you get a chance can you take a pic underneath of the exhaust tips? Which exhaust do you have, and did you cut the old tips off yourself? Btw, your car is sweet, love the look.

01pewterz28 · 07-17-2013, 09:56 PM

Quote:

Originally Posted by usranger80

If you get a chance can you take a pic underneath of the exhaust tips? Which exhaust do you have, and did you cut the old tips off yourself? Btw, your car is sweet, love the look.

I have the Flowmaster American Thunder exhaust, Yes the exhaust shop cut the pipes before and after the boxes re-welded the rear on and put new pipes in the front so they could bolt on the new tips. I will see if I can get a photo tomorrow for you.

These are the tips I purchased
http://www.ebay.com/itm/YONAKA-BMW-E...ht_3369wt_1162

usranger80 · 07-17-2013, 10:08 PM

Ok thanks, I have MRTv2, just wondering how hard it would be to take my sawzall to the current tips and bolt on the news ones. I bought the same tips as you have, got em from Amazon, but they are the same

01pewterz28 · 07-17-2013, 10:34 PM

Quote:

Originally Posted by usranger80

Ok thanks, I have MRTv2, just wondering how hard it would be to take my sawzall to the current tips and bolt on the news ones. I bought the same tips as you have, got em from Amazon, but they are the same

The only issue I had was that the single tip exhaust is off centered thus the new pipe needed to be added the exhaust shop charged me $100 took them approx 45 minutes the end result I was very happy with it.

You will see in the second photo where the red arrow is you can kind of see where the new pipe is and how it bent I will get a better photo for you.

usranger80 · 07-18-2013, 02:10 PM

Ok, so this looks like I will need to have someone do this for me.

jameslk55 · 07-18-2013, 02:46 PM

Looking good. Time for some interior ZL1-style mods?

01pewterz28 · 07-18-2013, 03:10 PM

Quote:

Originally Posted by usranger80

Ok, so this looks like I will need to have someone do this for me.

Yes any (ok well almost any as the 1st shop I went to the guy said he could not do it) shop can do it.

Quote:

Originally Posted by jameslk55

Looking good. Time for some interior ZL1-style mods?

Looking at doing the 2012 Dash swap.

Jims Mongoose · 08-07-2013, 04:32 PM

Quote:

Originally Posted by 01pewterz28

I finally went ahead and finished off my ZL1 Appearance mods by adding the ZL1 side skirts, and the ZL1 rear diffuser with some nice quad tips.

I had the GM GFX side skirts and rear diffuser I sold them to a fellow member.

Thanks to Maureen and the crew over at Rodgers Chevrolet for the hook up.

Enjoy

Your car looks awesome. Some day I may go for the whole set up but for now I just want the rockers.

I have a 2013 1LE and I am interested in adding the ZL1 rockers like you have.

I have a few questions about them and all my research did not clearly state how they go on and do these sider rockers extend below my current ones. Everything I read says that I take the existing rocker off to put the ZL1 rockers on. From the pictures it looks like the shiney black existing rockers stay on and the ZL1 rockers attach to that.Please help.

Also how much are the rockers from the dealer? Are they easy to install.

Jim

scottc · 08-07-2013, 07:35 PM

Quote:

Originally Posted by Jims Mongoose

Your car looks awesome. Some day I may go for the whole set up but for now I just want the rockers.

I have a 2013 1LE and I am interested in adding the ZL1 rockers like you have.

I have a few questions about them and all my research did not clearly state how they go on and do these sider rockers extend below my current ones. Everything I read says that I take the existing rocker off to put the ZL1 rockers on. From the pictures it looks like the shiney black existing rockers stay on and the ZL1 rockers attach to that.Please help.

Also how much are the rockers from the dealer? Are they easy to install.

Jim

I had the ZL1 rockers on my sgm and they replace your stock ones...easy install.

07-17-2013, 03:18 PM	#17
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	So diffuser was $500 painted and shipped? __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

07-17-2013, 03:48 PM	#18
whemming Drives: 2010 1SS/RS Join Date: Jul 2012 Location: Raleigh, NC Posts: 273 View My Garage	I like it. I think you should stop now..looks perfect Is it lowered? hard to tell, but if its not lowered already, I would drop her an inch __________________

07-17-2013, 09:50 PM	#20
usranger80 Drives: 2011 1LT "Bumblebee" Join Date: Jun 2011 Location: San Angelo, TX Posts: 699 View My Garage	If you get a chance can you take a pic underneath of the exhaust tips? Which exhaust do you have, and did you cut the old tips off yourself? Btw, your car is sweet, love the look. __________________

07-17-2013, 10:08 PM	#22
usranger80 Drives: 2011 1LT "Bumblebee" Join Date: Jun 2011 Location: San Angelo, TX Posts: 699 View My Garage	Ok thanks, I have MRTv2, just wondering how hard it would be to take my sawzall to the current tips and bolt on the news ones. I bought the same tips as you have, got em from Amazon, but they are the same __________________

07-18-2013, 02:10 PM	#24
usranger80 Drives: 2011 1LT "Bumblebee" Join Date: Jun 2011 Location: San Angelo, TX Posts: 699 View My Garage	Ok, so this looks like I will need to have someone do this for me. __________________

07-18-2013, 02:46 PM	#25
jameslk55 Drives: 2012 2LT/RS, 2005 SLK55 AMG Join Date: Jul 2012 Location: Falls Church, VA Posts: 1,163	Looking good. Time for some interior ZL1-style mods?