Swapping out CAI Tubes.

[Hellfighter]

Ok so i need some help, i have a Zl1 running with A CAI on a VMAX TB, now im wanting to swap over to a Nick Williams 102mm TB , since i will be taking off the snout and having it ported, reason for take off is because im swapping out the isolator, so while all that is off, install the AFCO radiator and D3 Reservoir.

So now is where i need help, since D3 Reservoir sits on top of the radiator, my current CAI box seem to fit it, on nice and snug im sure, most people dont have issues, but if i swap to a 102mm TB, where can i find the specific piece that can connect to my Tb and to the metal piece where the induction cone connects too, and im trying to find that rubber tube that also has a maf position sensor that wont affect it or have to do any modifications.

Anyone know where to find the silicone rubber tube part that connects to the new 102 TB and reconnects to the rest of the CAI, and not give any fitment issues to the MAF or the D3 Reservoir? Or am i stuck with Vmax forever, and if i want to change to the 102 i need to basically change out everything?

[Hellfighter]

Any feedback?

[RobZL1]

Maybe you could make this work if you cut it at the right angle:

http://vibrantperformance.com/catalo...oducts_id=1115

[Hellfighter]

Originally Posted by RobZL1

Maybe you could make this work if you cut it at the right angle:

http://vibrantperformance.com/catalo...oducts_id=1115

Seems a bit small, does that fit a 102 TB?

[RobZL1]

Fair point. Looks like a NW 102mm is 4.23 OD, and this tube is 4". My bad!

[Hellfighter]

Yeah it looks a little short as well lol.