05-21-2013, 06:58 PM | #1 |
Drives: 2010 Camaro SS/RS Join Date: Aug 2012
Location: Kansas City, Ks
Posts: 16
|
What driveshaft? ZL1 rear end conversion
I just installed Zl1 rear end today. (complete cradle, brakes, diff, etc.) I need to know what drive shaft setup to use. I think the stock SS driveshaft is too long? I have read lots of B/S about this swad and just want to hear from someone that has done it.
__________________
2010 Camaro SS Texas Speed Cam, OBX Headers, Pypes mufflers, P1-sc Procharger with 4psi boost, 580rwhp, tuned by Justune, ZL1 complete rear.
|
05-21-2013, 08:21 PM | #2 |
Drives: 05 GTO Join Date: Jul 2009
Location: Wichita, KS
Posts: 1,243
|
We have done a few ZL1 shafts in our 3.5" aluminum slip style, give us a call if you have any questions.
Thanks Chris |
05-23-2013, 08:59 PM | #3 |
Drives: 2010 Camaro SS/RS Join Date: Aug 2012
Location: Kansas City, Ks
Posts: 16
|
I guess you do need a ZL1 driveshaft and a trans adapter from ADM. I will say Adam from adm knows these cars in and out. I will definitely use these guys again.
__________________
2010 Camaro SS Texas Speed Cam, OBX Headers, Pypes mufflers, P1-sc Procharger with 4psi boost, 580rwhp, tuned by Justune, ZL1 complete rear.
|
05-27-2013, 08:06 PM | #4 |
Drives: 2010 black lingenfelter Join Date: Jul 2011
Location: Independence, LA
Posts: 89
|
Where did you get the rear zl1, parts and price im interested in doing the same
__________________
[/SIGPIC]600 hp lingenfelter TVS 2300 package pedders springs adjustable struts sways all bushings brake hose kit cold air fuel pump boost twindisc clutch 1400hp axles 3.70 gear borla cat back badging coil covers floor mats lpe pedals 20"forgelines nitto,s, idealg master, clutch res,,lethal racing cam package with oil pump pushrods timing chain ,meth kit ,zl1 pump ,kooks 1 7/8 high flow Kats , ridetech rear coilovers ,air fuel gauge, fuel pressure gauge , shift light ,way cool awsome set up love it!
|
05-28-2013, 09:51 PM | #5 |
Drives: 2010 Camaro SS/RS Join Date: Aug 2012
Location: Kansas City, Ks
Posts: 16
|
I Bought the complete rear from Cleveland pick a part for $2750 and $350 for shipping and driveshaft from the same for $425 shipped. Transmission flange for $200 from ADM. I also purchased billet cradle bushings from ADM for $4-500 ? also front and read trans bolts for $4 a piece from Chevy. ADM guys Know these cars!
__________________
2010 Camaro SS Texas Speed Cam, OBX Headers, Pypes mufflers, P1-sc Procharger with 4psi boost, 580rwhp, tuned by Justune, ZL1 complete rear.
|
|
|
|
|