12-16-2014, 10:22 PM | #1 |
Demon Eyes Halos and fog lights halo
The video really don't capture how extremely good those look, the halos from the fog lights you can't almost see it in the video, very happy with them, if you are thinking of doing this mod, do it, you won't regret it.
Last edited by HeLLDaFieL; 12-16-2014 at 11:13 PM. |
|
12-16-2014, 10:24 PM | #2 |
couple pics.
Last edited by HeLLDaFieL; 12-16-2014 at 11:18 PM. |
|
12-16-2014, 11:05 PM | #3 |
Norcal Camaros
Drives: 2010 Red Jewel 2SS L99 Join Date: Mar 2012
Location: Nor-Cal Bay Area
Posts: 759
|
Cool lights and as for the 2 videos your post tag should be just the last bit after youtu.be/ then [/U2b] only. check if you tagged it twice
__________________
Blaque Diamond Wheels BD23's 20x10, Hankook V12 275, AAC footwell lighting, Switchback LED's, AAC Mailslot scanner, AAC underhood, grill & underbody led lighting, AAC Plasma fogs, Eagle eye HIDs, RJT Painted calipers, RJT painted engine bay, Viteese Paddle Shifters, CFD Hurst style Shifter, RJT painted speedo & gauge trim, RotoFab CAI, TSP 2" Headers with full 3" XS Power exhaust, Granatelli Slotted rotors & Hawk HPS pads, ACS Side Rockers, ACS Front splitter, ZL1 Grill, Havoc Rear diffuser, BMR 1.4 Springs, BMR Strut tower brace, BMR F/R Sway Bars, BMR Trailing Arms,
|
12-16-2014, 11:14 PM | #4 |
12-16-2014, 11:19 PM | #5 |
Norcal Camaros
Drives: 2010 Red Jewel 2SS L99 Join Date: Mar 2012
Location: Nor-Cal Bay Area
Posts: 759
|
__________________
Blaque Diamond Wheels BD23's 20x10, Hankook V12 275, AAC footwell lighting, Switchback LED's, AAC Mailslot scanner, AAC underhood, grill & underbody led lighting, AAC Plasma fogs, Eagle eye HIDs, RJT Painted calipers, RJT painted engine bay, Viteese Paddle Shifters, CFD Hurst style Shifter, RJT painted speedo & gauge trim, RotoFab CAI, TSP 2" Headers with full 3" XS Power exhaust, Granatelli Slotted rotors & Hawk HPS pads, ACS Side Rockers, ACS Front splitter, ZL1 Grill, Havoc Rear diffuser, BMR 1.4 Springs, BMR Strut tower brace, BMR F/R Sway Bars, BMR Trailing Arms,
|
12-17-2014, 07:28 AM | #6 |
Banned
Drives: 2013 RS Join Date: Apr 2014
Location: New York, New York
Posts: 383
|
are those on rs headlights? any DIY?
|
12-17-2014, 07:42 AM | #7 |
RIDING ON AIR
Drives: 2010 2LT/RS Summit White Join Date: Dec 2009
Location: Long Island NY
Posts: 964
|
looks good
__________________
--John--2010 Camaro 2LT/RS, Summit White Air Ride Suspension, BBK Longtube Headers, Hi-Flo cats, Doug Thorley catback exhaust, Elite Catch-Can, Airraid CAI, Trifecta tune, ZL1 front end with Phantom grille, ZL1 side skirts, MRR228 graphite wheels |
12-17-2014, 08:57 AM | #8 |
Drives: Camaro Lighting Experts Join Date: Feb 2012
Location: St. Louis, MO
Posts: 2,429
|
Looks fantastic! Did you install them or have a shop in FL do it?
Nick C. |
12-17-2014, 07:20 PM | #9 |
Stock headlights 2013 1LE, I didn't want mess with, since headlight assembly needs to be put inside an oven.
I got a shop to do it, something very unsettling of putting the headlights inside an oven. lol |
|
12-20-2014, 09:08 AM | #10 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
I have this setup as well. AAC lighting makes a smaller ring for the Demon Eye which I used. I have the lower and upper headlights done in Halo as well. Normally I run the demon eyes in the headlight and the lower fog keeping the Headlight halo off.
|
|
|
|
|