04-17-2014, 10:41 AM | #1 |
Drives: 2x 05 Vettes/65'AC cobra/68 camaro Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
|
Just finished up a ETMC stg 6 kit
BIG THANKS to Daniel for making the 6 hour drive down from northern OK. As you guys know those poor guys dont have 93 oct fuel so we dont get so see the HUGE numbers that the 93 fuel will get but all in all the car made some good Numbers.
We did a rear cogs for the sound. It is a OD cogs and running the 3.8 up front to keep the boost down under 10 PSI. While the car was in we also did some side skirts, and a bunch of rear suspension for him. He opted for the Ripper cam which is our smaller FI cam next to the stg 2 FI cam. Car is a 1lE 2014. I told him i would get a vid up of his car so he could see the dyno run, im just running a little behind but here it is. TVS 2300 9 PSI ETMC RIPPER CAM Headers Stock Mufflers CAI Tune |
04-17-2014, 02:19 PM | #2 |
Drives: ETMC built 700+hp Twin Turbo LS3 Join Date: Apr 2010
Location: Killeen, TX
Posts: 682
|
Nice numbers for not having 93. On a side note, im headed overseas again so Ill be hitting you guys up again when i get back. 700hp just isnt enough....lmao
|
04-17-2014, 02:50 PM | #3 |
Drives: 2x 05 Vettes/65'AC cobra/68 camaro Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
|
yea and the smaller cam also. the ETMC stg 2 you have would have been 30 more hp im betting.
cant wait! hit me a email |
|
|
|
|