01-22-2011, 10:10 PM | #1 |
El Presidente (SJCC)
|
XSPower Complete Header System Review
XSPower Complete Header System Review
Just posted my review along with some videos. http://www.camaro5.com/forums/showthread.php?t=125476 SOPMOD...OUT!
__________________
You do not need a parachute to skydive. You only need a parachute to skydive twice. People sleep peacefully in their beds at night only because a soldier stands ready to do violence on their behalf. |
01-23-2011, 01:28 PM | #2 |
Drives: 2009 ZR1 Join Date: May 2010
Location: KCMO
Posts: 3,205
|
Very nice write up. I did my dimpling the same way. I have your stock on my AR15 too.
|
01-23-2011, 01:58 PM | #3 |
El Presidente (SJCC)
|
Thank you!
Keep Em Down The Middle! SOPMOD...OUT!
__________________
You do not need a parachute to skydive. You only need a parachute to skydive twice. People sleep peacefully in their beds at night only because a soldier stands ready to do violence on their behalf. |
01-23-2011, 02:06 PM | #4 |
Drives: 2015 c7 Join Date: Nov 2009
Location: MI
Posts: 7,462
|
ya really nice write up.. i am a little to lazy to read it all but it sounds good. it seems it really hard to make a v8 camaro sound bad these days lol
|
01-24-2011, 02:54 PM | #5 |
Drives: white 2010 ss and 2011 6.2 silvy Join Date: Jan 2011
Location: dfw
Posts: 316
|
how is the interior resonance im pondering this as well but worried its to loud.
|
01-24-2011, 05:09 PM | #6 |
Gearhead
Drives: 2010 2SS/RS L99 Join Date: Oct 2010
Location: Indy
Posts: 204
|
Do tell? SOPMOD (or blake) would one of you gents pm me details on AR15 stock? I'm always looking for good functional rifle accessories. Thanks much!
|
01-24-2011, 05:17 PM | #7 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
my perf. shop i deal with just did a set as they were doing my kooks..thay compared to mine and were very close...headers went on fine , i warned them about issues some had with pass frame and steering shaft..no problem on shaft, a litttle close on frame , does not appear they will rattle against..however they were disattisified with the rest of exhaust, did not fit like it should of mechanic said...they had to tweak things to get it to fit without making noise agaist different areas of car..just passing along my shops opinion..
__________________
|
01-24-2011, 07:18 PM | #8 |
El Presidente (SJCC)
|
Best I can say is watch the videos at the bottom of my review.
Loud is a loaded question, what is loud to you may not be loud to me? You can hear the car inside, like I mentioned in my review it dose have minor drone at around 1,800 rpm's. I have a rigid Panhead with no baffles, some say its loud but to me it's not loud enough. SOPMOD...OUT!
__________________
You do not need a parachute to skydive. You only need a parachute to skydive twice. People sleep peacefully in their beds at night only because a soldier stands ready to do violence on their behalf. |
01-25-2011, 08:05 PM | #9 |
Drives: white 2010 ss and 2011 6.2 silvy Join Date: Jan 2011
Location: dfw
Posts: 316
|
i guess your right everones opinions of loud are different, haha. my wife is deiving our camaro on a daily basis so if the exhaust has too much drone it will spell problems for me. thanks for your review i did find it helpfull.
|
01-25-2011, 09:58 PM | #10 |
Drives: Orange 2SS/RS LS3 Join Date: Apr 2010
Location: Southside Chicago
Posts: 171
|
are the windows down in that vid? seems like the wind cuts out the exhaust sound
|
01-26-2011, 07:06 AM | #11 | |
El Presidente (SJCC)
|
Quote:
Yes in the beginning the window was down. You can hear the wind and sound change when window went up. SOPMOD...OUT!
__________________
You do not need a parachute to skydive. You only need a parachute to skydive twice. People sleep peacefully in their beds at night only because a soldier stands ready to do violence on their behalf. |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
XS power Headers clearance issues | Alain | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 43 | 02-14-2011 08:13 AM |