04-29-2011, 08:53 PM | #1 |
Cedar Creek Woodshop
|
I think this is where I post this
I am getting a message on the dash saying roll my driver side window all the way down and all the way back up. I do it but it does nothing. My window goes down a tad when I open it (normal yes) but then it wont go back up unless I go over to the passenger side and crawl to roll up up. I have had this problem before and they replaced the motors and it was great for months now it is happening again. Anyone know anything about this?
__________________
2014 Black 2SS/RS 1LE
|
04-29-2011, 10:00 PM | #2 |
Voice Of The Voiceless
|
So, when you roll the windows down all the way and then roll them all the way back up it does nothing?
Try rolling the windows down all the way, and hold the switch there for a good three seconds. Then, roll them all the way up and hold the switch there for another good three seconds. See if that changes anything.
__________________
|
04-29-2011, 11:54 PM | #3 |
Drives: 2010 2SS/RS L99 Join Date: Nov 2009
Location: California
Posts: 588
|
Sometimes you need to do it few times before the recalibration takes. Other times the windows need recalibrated before the message pops up. The think we'll all hate this feature in a few years. It's an engineering brain fart in my opinion.
|
04-30-2011, 12:13 AM | #4 | |
Drives: 2010 Camaro 2LT/RS ABM Join Date: Sep 2009
Location: Sugar Land, TX
Posts: 13,075
|
Its when ur indexing windows need to be re-calibrated. My car would show that message sometimes but when i would roll it down and then back up it would be fine.
__________________
2LT, RS, AT6 ABM, Gray Leather
Quote:
1100 Order accepted at dealer: 9/15/2009 - NPGV41. 2000 Order accepted by GM: 9/29/2009 3000 Accepted By Production Control: 9/30/2009 - TPW 10/26/09 3100 Sequenced:10/12/09 3300 Scheduled For Production:10/13/09 3400 Broadcast:10/22/09 3800 Produced:10/27/09 4000 Available To Ship:10/28/09 4200 Shipped:10/29/09 5000 Delivered To The Dealer:11/09/09 6000 Delivered To Customer:11/12/09 |
|
04-30-2011, 02:19 AM | #5 |
The wait is over!
Drives: 2010 Camaro, IOM, L99, Auto Join Date: Mar 2010
Location: Washington
Posts: 1,081
|
x2 - you need to hold it for a few seconds - count to 5 then go back up.
__________________
Ordered - 4/17/2010
Delivered - 5/29/2010 AlphaDamp CLD Mat - Get more Sound Deadening with less Sound Deadener |
04-30-2011, 03:32 AM | #6 |
Cedar Creek Woodshop
|
I been going through the passengers side to roll the window up. It was getting annoying. I help it up and down. And its fine for now
__________________
2014 Black 2SS/RS 1LE
|
04-30-2011, 05:58 AM | #7 |
I had this same problem last week the steps I took this goes by what the manual says
1. With the door shut and the ignition on and the car in park roll down the window. 2. Roll the window back up hold your the switch with your finger for a few seconds and the light will turn off. |
|
04-30-2011, 07:05 AM | #8 |
Drives: 2010 2SS IOM\IOM Join Date: Jul 2008
Location: NJ
Posts: 163
|
The fact our windows need to be calibrated is the dumbest thing I have ever heard. Just thought I would throw that out there.
|
04-30-2011, 11:00 PM | #9 | |
The wait is over!
Drives: 2010 Camaro, IOM, L99, Auto Join Date: Mar 2010
Location: Washington
Posts: 1,081
|
Quote:
having the window roll down slightly means the window can seal in a channel and be held in place securely at high speeds without gapping. I would imagine it would be damaging to have the window all the way up when the door is being opened, forcing the window out of that channel sideways. Cant imagine it being a good deal to have the window bent out around the outer edge of the channel when the door is being closed. so, yeah I can see how it might be dumb in some respects, a few seconds of rolling down, holding and rolling up seem a small price to pay for as often as it needs to be done.
__________________
Ordered - 4/17/2010
Delivered - 5/29/2010 AlphaDamp CLD Mat - Get more Sound Deadening with less Sound Deadener |
|
04-30-2011, 11:04 PM | #10 |
Drives: 2010 Cyber Grey 2SS/RS (L99) Join Date: Dec 2010
Location: Luling,LA.
Posts: 111
|
Anytime I'm doing work on my car that requires me to unhook the battery ,I get this message once I try to start it back up
|
05-01-2011, 11:20 AM | #11 |
Voice Of The Voiceless
|
Yep, when I replaced my amp I got the message. But I did the above steps and haven't had a problem since.
__________________
|
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tips for first time Manual Transmission Drivers from a new Camaro Owner (First post) | LoneCynic | 5th Gen Camaro SS LS LT General Discussions | 44 | 04-03-2016 02:46 AM |
First post of the day game | Sterling | Gaming Lounge | 2096 | 05-22-2013 11:10 PM |
Next CAMARO5 meet/greet/cruise/hangout 7/25 | 67camaro99 | USA - California | 229 | 07-26-2009 02:07 PM |