I finially have an engine - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jessrayo · 01-07-2016, 02:36 PM

My ZL1 has not run for an entire year but my new engine just shipped out today. Don't know how long until I'm running again but having a working engine is a step in the right direction. If you are interested in looking at the dyno test it is on my build thread post number 177. Man do I miss my car.

Here is a link to the build thread:
http://www.camaro5.com/forums/showth...=1#post8829103

Bigtime53 · 01-07-2016, 02:48 PM

Well cool Jess!! It is about time. I am anxious for you to get it running to so I can see what you have to say about it. Keep all of us in the know!

KaBoom1701 · 01-07-2016, 03:04 PM

Very cool.

Cant wait to see you put it all back together again.

G Money · 01-07-2016, 03:24 PM

That sure is a step in the right direction......Can't wait to see the finished product. Congrats.....

ZL1-V · 01-07-2016, 04:31 PM

I'm happy, that you're happy! Congratulations Jess.

white1LE · 01-07-2016, 05:31 PM

Will Andy be doing the build?

jaymoo7 · 01-07-2016, 05:37 PM

I need some of that Jessrayo money......

jessrayo · 01-07-2016, 05:47 PM

Quote:

Originally Posted by white1LE

Will Andy be doing the build?

Engine was assembled by LME in Houston. It is a 1500+ whp iron block with 6 bolt O-ringed heads and copper head gaskets. Engine is shipping to ADM assembled and ready to install.

ADM has got to hook it to the quad disc slayer clutch, rpm custom transmission, carbon driveshaft and Hendrix engineering rear. Then ADM has to hook up the custom bypass lid for the supercharger and turbos, set up the nitrous system and tune everything so it will run well enough to challenge the record for a gen 5 Camaro in the spring Texas mile..... that is the plan anyway.

jessrayo · 01-07-2016, 05:52 PM

Quote:

Originally Posted by jaymoo7

I need some of that Jessrayo money......

Yeah the car is a bit of an addiction.... because of the car I have no money... I'm still making payments on it.....

99frc · 01-08-2016, 12:00 PM

Quote:

Originally Posted by jessrayo

Engine was assembled by LME in Houston. It is a 1500+ whp iron block with 6 bolt O-ringed heads and copper head gaskets. Engine is shipping to ADM assembled and ready to install.

ADM has got to hook it to the quad disc slayer clutch, rpm custom transmission, carbon driveshaft and Hendrix engineering rear. Then ADM has to hook up the custom bypass lid for the supercharger and turbos, set up the nitrous system and tune everything so it will run well enough to challenge the record for a gen 5 Camaro in the spring Texas mile..... that is the plan anyway.

Hope you get the record! I might even have to roll out for that one. Keep us updated if you get it ready in time.

jessrayo · 01-08-2016, 01:27 PM

Quote:

Originally Posted by 99frc

Hope you get the record! I might even have to roll out for that one. Keep us updated if you get it ready in time.

Well..., J&S Motorsports just published the 2016 event dates for all their land speed events this morning and my company has me scheduled for a seminar in Minneapolis on the spring Texas mile date..... so I don't know how it is all going to play out. I hate to wait until October but I have been waiting a little while already. Maybe I'll run the event in Arkansas in June...

white1LE · 01-08-2016, 05:10 PM

I'm working on sending my car to Andy shortly for the AGP twin turbo kit. IT IS AN ADDICTION!!!!!!!

LuckyZL-1 · 01-09-2016, 04:31 PM

Quote:

Originally Posted by jessrayo

Well..., J&S Motorsports just published the 2016 event dates for all their land speed events this morning and my company has me scheduled for a seminar in Minneapolis on the spring Texas mile date..... so I don't know how it is all going to play out. I hate to wait until October but I have been waiting a little while already. Maybe I'll run the event in Arkansas in June...

Oh well that's easy just quit your job. Haha! This is when the knee pads come out to beg the boss.

01-07-2016, 02:36 PM	#1
jessrayo Speed Freak Drives: 2013 ZL1 Camaro, 2016 Camaro SS Join Date: Jun 2013 Location: Ardmore, OK Posts: 2,637 View My Garage	I finially have an engine My ZL1 has not run for an entire year but my new engine just shipped out today. Don't know how long until I'm running again but having a working engine is a step in the right direction. If you are interested in looking at the dyno test it is on my build thread post number 177. Man do I miss my car. Here is a link to the build thread: http://www.camaro5.com/forums/showth...=1#post8829103 __________________ 2016 SS -AGP twin Borg Warner 7163 EFR's, LT4 mechanical pump, LT4 injectors, Walbro 255 low side, Castrol SRF. 734whp/759 tq 2013 ZL1 -ADM - 427 LSX 6 bolt, O-ringed block built by LME. Twin PT6466 turbos. RPM custom manual trans, RPS Quad carbon clutch, 9" Hendrix rear diff & axles. ADM/squash fuel system, Ron Davis radiator, Spal fans, AGP air to air, turbo plumbing. LPE oil cooler, rear bushing upgrade, roll bar...etc. rwhp 1400+... 212.5mph, best Texas mile to date.

01-07-2016, 03:04 PM	#3
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,630	Very cool. Cant wait to see you put it all back together again. __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

01-07-2016, 03:24 PM	#4
G Money Drives: 2013 ZL1, 2016 Denali HD Join Date: Jun 2013 Location: Greensboro Ga. Posts: 540	That sure is a step in the right direction......Can't wait to see the finished product. Congrats..... __________________ LSX 427, Twin Precision Turbo's, 64/66. Nitrous Outlet System. Pro EFI Engine Management Systems. Vengeance Racing Built......

01-07-2016, 05:31 PM	#6
white1LE Drives: 2013 Camaro ZL1 Join Date: Nov 2012 Location: Dubuque, IA Posts: 880	Will Andy be doing the build? __________________ 13 ZL1 A6 LSX 427 with AGP Twin Turbos, E85 and Flex Fuel. Built and tuned by ADM Performance 1000rwhp

01-07-2016, 05:37 PM	#7
jaymoo7 Drives: 2013 Camaro ZL1 A6 Join Date: May 2013 Location: Slidell, La Posts: 248	I need some of that Jessrayo money...... __________________ SOLD 2013 Camaro ZL1 M6 2013 ZL1 A6- Still completely stock.

01-07-2016, 02:48 PM	#2
Bigtime53 Drives: 2013 ZL1 Join Date: Mar 2013 Location: Oklahoma Posts: 2,298	Well cool Jess!! It is about time. I am anxious for you to get it running to so I can see what you have to say about it. Keep all of us in the know!

01-07-2016, 04:31 PM	#5
ZL1-V Drives: 2013 Camaro ZL1 Join Date: Dec 2012 Location: Dallas, Texas Posts: 2,155	I'm happy, that you're happy! Congratulations Jess.

01-08-2016, 05:10 PM	#12
white1LE Drives: 2013 Camaro ZL1 Join Date: Nov 2012 Location: Dubuque, IA Posts: 880	I'm working on sending my car to Andy shortly for the AGP twin turbo kit. IT IS AN ADDICTION!!!!!!! __________________ 13 ZL1 A6 LSX 427 with AGP Twin Turbos, E85 and Flex Fuel. Built and tuned by ADM Performance 1000rwhp