What Did You Do To Your Camaro Today?

[RayTheRat]

Originally Posted by SSmedwin

where can i get the tail light bezels that are black? like my tailight has the chrome and there tinted, i would like to get them completely blacked out

You can do a google search for 'black tail light bezels for 2010 camaro' (or whatever year that's applicable) and find sets for about $70 or you can do like most of us have and paint your own with Plasti-Dip for about $5.

Check my build diary which isn't nearly as in-depth as some, but I've tried to show what I've been able to accomplish over the last few months:

http://www.chevyasylum.com/10Camaro/Welcome.html

[BCombs79]

Got my Moroso catch can installed today and got my rear bowtie off and ready to put the new one on. That comes tomorrow along with blacking out my taillight panel and bezels.

[SS PANTHER]

Took a cruise in my 2013 SS convertible through Angeles Crest with my best friend in his 2013 427 Corvette convertible and my other good friend with his 2013 Porsche Turbo S cabriolet.

[phxmikeellis]

Switched the red RS in the back to a white RS.

[321 CYA]

Just take them off and plasti dip them. It works great and is cheap.

[BluePhoenix]

I'll really have to think about Plasti-dip tail light bezels when I get my car, those blacked out bezels looks so much better than the stock chrome.

[01pewterz28]

Finally added my ZL1 painted side skirts and ZL1 rear diffuser w/ quad tips. Thanks to Maureen at Rodgers Chevrolet for the parts. I have completed my ZL1 appearance mods.

[CRTZL1]

Originally Posted by 01pewterz28

Finally added my ZL1 painted side skirts and ZL1 rear diffuser w/ quad tips. Thanks to Maureen at Rodgers Chevrolet for the parts. I have completed my ZL1 appearance mods.

Where did you get your tips? Wait are these the 3 inch cause I want minimum 3.5 inch if not 4
The good ones on eBay and from ssclones are on dam back order!!

[01pewterz28]

Originally Posted by SSRS55

Where did you get your tips? Wait are these the 3 inch cause I want minimum 3.5 inch if not 4
The good ones on eBay and from ssclones are on dam back order!!

I paid $69 for the following tips they look great no issues at all.

http://cgi.ebay.com/ws/eBayISAPI.dll...ht_3369wt_1017

[CRTZL1]

Originally Posted by 01pewterz28

I paid $69 for the following tips they look great no issues at all.

http://cgi.ebay.com/ws/eBayISAPI.dll...ht_3369wt_1017

Yeah they do look good and I was actually going to get those but there not staggered, right?
But hey if these others keep taking forever I'm going to have to.
So they look real good then? Kind of wanted staggered!

[RayTheRat]

I took mine to a car show (got caught in a rainstorm on the way there...spent the first 30 minutes drying it off, then another 45 or so tryin to get any spots I missed shined up) at a convalescent center for military veterans.

One guy wanted a ride in my car so I helped him transfer from his wheelchair into the passenger seat, belted him in and then switched the traction control off. It laid down a nice pair of black lines for the length of the parking lot (well, I had to leave a little room to stop) and put a permagrin on the dude's face.
(I thought there was a burnout smilie here)

The gent in the photo with the walker is a 27-year navy vet...there were numerous vets with 20+ years there. I'm a Cold War vet and I felt kinda awkward havin guuys like this thanking me for my service. It was a major "feelgood", tho.

[GQ4Life]

Originally Posted by RayTheRat

The gent in the photo with the walker is a 27-year navy vet...there were numerous vets with 20+ years there. I'm a Cold War vet and I felt kinda awkward havin guuys like this thanking me for my service. It was a major "feelgood", tho.

Yeah Im always like.. "No Sir.. Thank You"

[alexmena_89]

Changed the chevy logo to the camaro letters and blacked them out as well as the tailight bezels!

[Kinetic Kev HWSE 2013]

I went for a nice long ride tonight. Too hot to clean it up so I'll do that tomorrow.