2010 Summit White Camaro 2SS/RS, 416ci stroker, only 5400 miles

[JUISSD]

SOLD

Up for sale is my 2010 Summit White/Inferno Orange Camaro 2SS/RS. I am the original owner, bought new in July 2010 (late model 2010 with the backup sensors). It only has 5400 miles and has been garage kept since new. Non-smoker and it’s never been wrecked. It is in excellent condition. It has a brand new 416ci HKE built stroker engine with about 900 miles on it. HKE is recognized as one of the best LS engine builders in the country with a very long wait list to get engines built. The car runs and drives perfectly with zero issues, codes, or leaks and sounds amazing. It also has brand new Forgestar wheels and tires, along with a lot of other modifications. It has just a couple of rock chips but it does have one scratch on the passenger side door (thanks to my wife’s bike falling over in the garage a couple of weeks ago, the bike won that fight). The scratch is pictured below. Here are the details on the car:

2010 Camaro SS
2SS package
RS package
Summit White/Inferno Orange stripes
Inferno Orange interior package
Sunroof
6spd manual
5400 miles

Mods

-HKE built 416ci stroker engine
-Callies Compstar forged crankshaft
-Callies Compstar forged rods
-Wiseco forged pistons, 11:1 CR
-HKE ported LS3 heads
-HKE custom camshaft and all new supporting valvetrain upgrades
-ARP studs and hardware
-N-Motion double roller timing chain
-Melling HV oil pump
-Powerbond SFI balancer
-Katech heater hose relocator kit
-Elite Engineering catch can
-CAI brand cold air kit
-American Racing Polydyn ceramic coated 1 7/8" long tube headers
-American Racing high flow catted xpipe (brand new ARH catless pipes included with sale)
-Magnaflow Competition Axleback
-Custom dyno tune
-Barton shifter
-Line lock
-Brand new 18x9, 18x11 textured gunmetal Forgestar CF5 wheels
-Brand new 275/45ZR-18 Continental ExtremeContact DW tires up front
-Brand new 315/40-18 Nitto NT05R Drag Radials out back
-Brand new R1 Concepts Premium Series drilled and slotted rotors
-Brand new Hawk ceramic pads
-Eibach springs
-BMR rear trailing arms
-BMR tunnel brace
-Metco driveshaft loop
-Tinted windows
-Custom satin black painted front fascia, rear fascia, and taillight trim rings
-GM Heritage grille, painted satin black
-Real '69 Camaro emblems on fenders, front, rear, and glove box
-Brand new Lloyds mats with ’69 Camaro script














IDLE VID:



The car put down 510rwhp/481rwtq on a conservative tune with the stock throttle body and intake manifold. Swapping those will gain around another 25rwhp. The engine was fully assembled by HKE and installation and tuning was professionally done by G-Force Motorsports in Pearland, TX. They all did a fantastic job to create a car that runs and drives perfectly and is much more reliable than a supercharged set up (with plenty of room to grow too!). Absolutely zero disappointments and you can drive this car anywhere. Get ZL1 power at a fraction of the cost. Price is $32,500.

Please only serious buyers. Email me at scottrowe95z@yahoo.com if interested. Thanks.

[blake-b]

Gorgeous car. If it doesn't sell and you entertain the idea of getting rid of just the tires/wheels, let me know. I have a set of gunmetal F14s in the same sizes and they just aren't doing it for me.

[JUISSD]

Thanks! I'll keep that in mind.

[2010abmss]

Man this is beautiful and such a great price and its exactly what I'm looking for. I'm trying to sell my truck, if it sells I will get in touch with you. I'm in San Antonio so I'm close.

[tnt1501]

beautiful car dude!! I love the sound of a modified engine!!!! glws

[newmoon]

If this were an automatic car I'd be interested. How did it run at the track?

[JUISSD]

Originally Posted by 2010abmss

Man this is beautiful and such a great price and its exactly what I'm looking for. I'm trying to sell my truck, if it sells I will get in touch with you. I'm in San Antonio so I'm close.

Originally Posted by tnt1501

beautiful car dude!! I love the sound of a modified engine!!!! glws

Thanks! It really is a fantastic car. I absolutely love driving it. It turns heads and gets compliments everywhere I go. Even the diehard Mustang guys approve lol.

Originally Posted by newmoon

If this were an automatic car I'd be interested. How did it run at the track?

I took it once (on different tires) in humid wet weather (ended up raining us out before the end of the night) and on a very soft launch it went 12.003 @ 119.5. It's an easy low 11 second car that can drive anywhere. Of course it could always use a blower or nitrous. It's built for it!

[Raider-ss]

Very nice car. HKE is a reputable builder. Im sure you could get a ton more Hp out of that motor. Where the bike hit the door, is it a scratch or a scuff? did it break the clear coat? did it dent the door? Again great car.

[JUISSD]

Originally Posted by Raider-ss

Very nice car. HKE is a reputable builder. Im sure you could get a ton more Hp out of that motor. Where the bike hit the door, is it a scratch or a scuff? did it break the clear coat? did it dent the door? Again great car.

Thanks! The engine could definitely make a lot more power. The cam sounds wicked but it's actually a fairly mild grind. Idles great and doesn't lurch or chug on the highway in 6th gear. I wanted a car that made good power but was very streetable with the a/c on cruising down the road, but at the same time capable of much more if I wanted it.

The scratch unfortunately is through the paint. It'll require a paint fix to be perfect. Probably looking at a $500-$600 fix to do it right but could get by on a cheaper fix if you wanted. The rest of the car is so nice I'd do it the right way.

[bovi]

I hate Texas, you guys all have the craziest car and its so far from me!!!

[JUISSD]

I drove from here to Toronto, it's not too far! lol

[bovi]

You're crazy!! Ahahah, really nice car man. Thing is distance is fees so it change the price a lot. If you'd be North East, i would definitly come by.

[Blackkaz04]

Cam specs? Cam specs ish?

[christianchevell]

the real question is why are you taking such a bath on this car? this had to be way spendy to swap out the engine for a stroker? Why sell it that's one hell of a deal