Venting crankcase pressure? - Page 15 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JANNETTYRACING · 02-23-2015, 07:48 AM

Quote:

Originally Posted by jayno20

I like the JRE modded breather, but it could stand to cost about 30 to 40 dollars less than it does, if it was cheaper it would be even easier to decide which one to get.

If it cost 30-40 dollars less it would not be the quality it is.

Remember good stuff isn't cheap and cheap stuff isn't good.

Thanks again.

Ted.

Travis104 · 03-13-2015, 03:58 PM

I have a CAI on my car, and am getting ready to go with a 10% lower pulley. I have read all of the posts, and still wasn't clear at what point i should pick one of these up. I am not going to tune the car right now, and just run torco.

JANNETTYRACING · 03-13-2015, 04:07 PM

Quote:

Originally Posted by Travis104

I have a CAI on my car, and am getting ready to go with a 10% lower pulley. I have read all of the posts, and still wasn't clear at what point i should pick one of these up. I am not going to tune the car right now, and just run torco.

Now is a good time.

Travis104 · 03-13-2015, 04:13 PM

Thanks. I ordered your 75rwhp no tune kit, minus the intake. I already had a cold air induction intake. I will go ahead and pick one of these up from you.

GenF-GTS · 03-14-2015, 03:58 AM

Do these open vented oil breathers have any in car fumes smell?

JANNETTYRACING · 03-14-2015, 07:41 AM

Quote:

Originally Posted by Travis104

Thanks. I ordered your 75rwhp no tune kit, minus the intake. I already had a cold air induction intake. I will go ahead and pick one of these up from you.

Thank you for your business.

Ted.

ZMEnow · 03-14-2015, 11:32 AM

Ted is this the one on your site for Zl1? thanks ..

2010-2015 Camaro SS Metco Valve Cover Crankcase Breather

JANNETTYRACING · 03-14-2015, 11:40 AM

Quote:

Originally Posted by ZMEnow

Ted is this the one on your site for Zl1? thanks ..

2010-2015 Camaro SS Metco Valve Cover Crankcase Breather

Yes sir, trimming of the relief pocket is necessary on the engine cover.

There are pictures here somewhere.

Thanks
Ted.

jayno20 · 03-14-2015, 12:56 PM

Quote:

Originally Posted by GenF-GTS

Do these open vented oil breathers have any in car fumes smell?

I haven't experienced any.

L99CAMA2011 · 12-11-2016, 07:01 AM

Love the Metco breather I got from Teds shop. My engine loves it too.

Crash76 · 12-11-2016, 09:44 AM

After my cam install blew the dipstick out... installed a mighty mouse catch can and breather... love it. Do get a smell in the car, but it might be from residule oil on things ... i do know i have no crank case pressure issues anymore...

d454brisson · 12-11-2016, 12:19 PM

Which breather? The 46$ one or the modified one with the check valve for 110$. I already have the Moroso Catch Can

DB 2014Zl1

Crash76 · 12-11-2016, 04:07 PM

Need a breather with check valve

JANNETTYRACING · 12-12-2016, 08:12 AM

Quote:

Originally Posted by d454brisson

Which breather? The 46$ one or the modified one with the check valve for 110$. I already have the Moroso Catch Can

DB 2014Zl1

The modified version is what we recommend.

Keeps the PCV system from having a vacuum leak.

Ted.

03-13-2015, 03:58 PM	#198
Travis104 Drives: 2014 ZL1 Join Date: Sep 2012 Location: West Virginia Posts: 591	I have a CAI on my car, and am getting ready to go with a 10% lower pulley. I have read all of the posts, and still wasn't clear at what point i should pick one of these up. I am not going to tune the car right now, and just run torco.

03-13-2015, 04:13 PM	#200
Travis104 Drives: 2014 ZL1 Join Date: Sep 2012 Location: West Virginia Posts: 591	Thanks. I ordered your 75rwhp no tune kit, minus the intake. I already had a cold air induction intake. I will go ahead and pick one of these up from you.

03-14-2015, 03:58 AM	#201
GenF-GTS Account Suspended Drives: none Join Date: Oct 2012 Location: Sydney Australia Posts: 571	Do these open vented oil breathers have any in car fumes smell?

03-14-2015, 11:32 AM	#203
ZMEnow Drives: ZL1, 2013, tri-coat-red, manual Join Date: Nov 2013 Location: Michigan Posts: 1,607	Ted is this the one on your site for Zl1? thanks .. 2010-2015 Camaro SS Metco Valve Cover Crankcase Breather

12-11-2016, 07:01 AM	#206
L99CAMA2011 Drives: One of the baddest handling Gen 5s Join Date: Feb 2011 Location: Masachusetts Posts: 4,177	Love the Metco breather I got from Teds shop. My engine loves it too.

12-11-2016, 09:44 AM	#207
Crash76 Team 913 Drives: '14 ZL1, '15 Jeep GC, ‘22 Ram 2500 Join Date: Apr 2015 Location: USA, Central CA Posts: 1,119	After my cam install blew the dipstick out... installed a mighty mouse catch can and breather... love it. Do get a smell in the car, but it might be from residule oil on things ... i do know i have no crank case pressure issues anymore...

12-11-2016, 12:19 PM	#208
d454brisson Drives: 2014 ZL1 Join Date: Jul 2016 Location: Baltimore MD Posts: 345	Which breather? The 46$ one or the modified one with the check valve for 110$. I already have the Moroso Catch Can DB 2014Zl1

12-11-2016, 04:07 PM	#209
Crash76 Team 913 Drives: '14 ZL1, '15 Jeep GC, ‘22 Ram 2500 Join Date: Apr 2015 Location: USA, Central CA Posts: 1,119	Need a breather with check valve