Lookie what I have here !! - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Supercharged SS · 12-18-2011, 06:10 PM

Quote:

Originally Posted by Camaro21

Here is my Final Dyno !! This is with a 50 shot... It made 903 rwhp and 1007 rwtq on a 150 shot and we had to back it down...Too much power and torque for now!! I left the car with Andy to upgrade the clutch and slave cylinder once again.. The slave cylinder is coming apart...

I can't tell you how happy I am with the results... Andy keeps impressing me.. Thanks Andy and everyone at ADM Performance !!

Hey Camaro 21,

Do you have the Maggie specific kit?

mikepage0007 · 12-18-2011, 06:16 PM

ug-oh, looks like jamie shopping for more ted work...lol...

Camaro21 · 12-18-2011, 06:17 PM

Quote:

Originally Posted by Supercharged SS

Hey Camaro 21,

Do you have the Maggie specific kit?

I don't think so, but the picture on Post #1 shows the parts (I know it's not a close up).. I just told Andy I wanted NOS and he ordered the parts.. I have never had NOS before, so this will be a learning experience for me.. I will definately have to learn how to drive this AGAIN...

mikepage0007 · 12-18-2011, 06:44 PM

Quote:

Originally Posted by Camaro21

I don't think so, but the picture on Post #1 shows the parts (I know it's not a close up).. I just told Andy I wanted NOS and he ordered the parts.. I have never had NOS before, so this will be a learning experience for me.. I will definately have to learn how to drive this AGAIN...

looking at your build, i seem to have a similar build...whipple 2.9 with inwest 8rib and nos on a lsx...hoping to see numbers like you..that would be the 903rwhp and 1000 rwtq...lol

Camaro21 · 12-18-2011, 06:45 PM

Quote:

Originally Posted by mikepage0007

looking at your build, i seem to have a similar build...whipple 2.9 with inwest 8rib and nos on a lsx...hoping to see numbers like you..

Sweet !! I can't wait to get it on the track next year !!

mikepage0007 · 12-18-2011, 06:47 PM

Quote:

Originally Posted by Camaro21

Sweet !! I can't wait to get it on the track next year !!

my only worry at this time is belt slip...did you ask andy how the belt was looking at that hp, or was it slipping??

Camaro21 · 12-19-2011, 04:10 PM

I don't think the belt is slipping.. Looking at the dyno, it has a good curve to it. I do have an upgraded tensioner though !!

FloMoCamaro · 12-19-2011, 04:16 PM

Now you will have a new "tension" in your neck when the NOS turns on!!! :-)

Camaro21 · 12-19-2011, 04:34 PM

Quote:

Originally Posted by FloMoCamaro

Now you will have a new "tension" in your neck when the NOS turns on!!! :-)

mikepage0007 · 12-19-2011, 05:08 PM

Quote:

Originally Posted by Camaro21

I don't think the belt is slipping.. Looking at the dyno, it has a good curve to it. I do have an upgraded tensioner though !!

need more info on that belt tensioner...??? want as little as problems as i can get..

ParisTNDude · 12-19-2011, 05:11 PM

I ain't ever doin' nitrous! I've seen too many videos of violent explosions on the dragstrip for that. You might get warranty work even with headers and other bolt-ons, but nitrous......???

Camaro21 · 12-19-2011, 05:40 PM

Quote:

Originally Posted by mikepage0007

need more info on that belt tensioner...??? want as little as problems as i can get..

I bought this tensioner from East Texas Muscle Cars. I know Andy is working on a tensioner kit of his own!! Stay tuned for more info

navyblueSS · 12-19-2011, 07:14 PM

Strong numbers!

Supercharged SS · 12-19-2011, 07:27 PM

Quote:

Originally Posted by Camaro21

I don't think so, but the picture on Post #1 shows the parts (I know it's not a close up).. I just told Andy I wanted NOS and he ordered the parts.. I have never had NOS before, so this will be a learning experience for me.. I will definately have to learn how to drive this AGAIN...

Oh, Ok. Thank you for the honest answer. I know they make a Maggie specific kit but it only has a stock throttle body plate. Not sure if that would work for you. That's def going to be one hell of a ride down the track!!

Better you than me. Good luck brother!!

12-18-2011, 06:16 PM	#30
mikepage0007 Drives: 2010 camaro Join Date: Aug 2009 Location: port st lucie ,florida Posts: 4,273	ug-oh, looks like jamie shopping for more ted work...lol... __________________

12-19-2011, 04:16 PM	#36
FloMoCamaro Drives: 2010 Camaro SS Join Date: Dec 2009 Location: Flower Mound, TX Posts: 490 View My Garage	Now you will have a new "tension" in your neck when the NOS turns on!!! :-) __________________

12-19-2011, 05:11 PM	#39
ParisTNDude Owning SSes for 50 Years Drives: Sharkskin Grey LT1 Join Date: Apr 2010 Location: Paris, TN Posts: 3,139 View My Garage	I ain't ever doin' nitrous! I've seen too many videos of violent explosions on the dragstrip for that. You might get warranty work even with headers and other bolt-ons, but nitrous......??? __________________ The new ride: 2023 Camaro, LT1, Sharkskin Grey Previous Performance Cars: 1966 Chevelle SS 4M, 2010 Corvette 6M 1968 Dodge Charger R/T Auto 2012 1SS 6M 1982 Corvette Auto 2010 1SS 6A 1984 Corvette Auto 2016 2SS 8A 1999 Camaro Auto 2017 HBM 1SS 1le 2002 C5 Corvette 6M 2018 2SS 2006 Corvette Auto 2023 Camaro LT1

12-19-2011, 07:14 PM	#41
navyblueSS Drives: 2002 Camaro SS Join Date: Jul 2009 Location: Quitman, LA Posts: 609	Strong numbers! __________________ 2015 1LE - CAI intake, TSP longtubes, NPP, Futral Motorsports tuned, BMR 1"lowering springs, BMR trailing arms

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lookie what I brought home Friday night	2010_1SS	5th Gen Camaro SS LS LT General Discussions	39	04-12-2010 09:31 PM
I Received A Different Letter From GM	Steve	5th Gen Camaro SS LS LT General Discussions	734	09-25-2009 06:51 PM
Lookie who's Birthday it is!	Mr Twisty	Off-topic Discussions	22	01-20-2009 10:46 PM
lookie what i got for a late birthday present!	Dave McFly	Off-topic Discussions	1	05-31-2008 01:12 PM
Lookie what I got in the mail from Chevrolet.	Dave McFly	General Automotive + Other Cars Discussion	4	03-10-2007 08:45 PM

12-19-2011, 04:10 PM	#35
Camaro21 Drives: SOLD - 2013 M6 ZL1 Join Date: Jul 2009 Location: Texas Posts: 5,041 View My Garage	I don't think the belt is slipping.. Looking at the dyno, it has a good curve to it. I do have an upgraded tensioner though !!