01-13-2012, 12:58 AM | #1 |
Paul
|
New Adam's Customer.
For Christmas my parents bought me the Adam's Porter Cable starter kit that came with all the pads and polishes. And the bug bit me!
I turned around and bought the Interior kit, and the Deluxe wash kit and a bunch of other stuff, three orders total HAHA So far. I need to make another one for some Detail spray and all purpose cleaner by the time I am done with the four cars I plan to use this one!! I think the 5 gallon size will do nicely! I am almost done with the Camaro and I love this stuff!!! I can't wait to see it in the bright sun tomorrow. By the time I got to a finishing point the sun was too far down. But I did the 3 step polish, then the machine sealant stuff, the Glaze then the Americana carnabu wax to top it off on the hood and cab so far. Anyway I figured I would share some before and after photos, I am sure you can tell which is which. This is just of the swirl removal, once I am completely done I will take pictures of the whole car for every one. It may be a little while because I decided a little bit ago that I will be removing my hood spears and fender hash marks too.
__________________
|
01-13-2012, 04:21 AM | #2 |
:chevy:
Drives: 2LT/RS Join Date: Jun 2008
Location: Toronto
Posts: 13,033
|
WOW!
__________________
CAMARO
Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage |
01-13-2012, 12:10 PM | #3 |
Voice Of The Voiceless
|
Nice!
__________________
|
01-13-2012, 12:32 PM | #4 |
Drives: 2010 Camaro SS, 2018 Colorado Join Date: Nov 2009
Location: NC
Posts: 2,207
|
Nice Christmas present. Do you need an older brother?
|
01-13-2012, 12:49 PM | #5 |
Drives: The shiny ones. Join Date: Mar 2010
Location: In the detail shop!
Posts: 5,979
|
Well done! Thanks for posting the pics.
|
01-13-2012, 12:53 PM | #6 |
Drives: 1968 Coupe, 2010 2SS, 2011 2SS/RS Join Date: Oct 2011
Location: WIsconsin
Posts: 1,252
|
Love that Blue! Deep as the ocean!
__________________
|
01-13-2012, 03:26 PM | #7 |
Paul
|
Thanks guys!
I took a look today with the sun out and WOW!!! It's smooth, there are a few fine scratches near the hood spears, but I plan to remove all the vinyl on the car, once I do that I will hit those areas again and they will be history! I just stair at it while I am washing and waxing it, it's awesome. I love how the pictures came out. I can't wait to get some better full car photos. I plan to make a poster. These Adams products really are awesome, I have been reading about them in the forums since I joined in 2009 and I finally got some and now I am hooked! It is soo easy to use. My wrists are kind of sore today from the Porter Cable. I read a thread in their forums about that, but as soon as I get use to it just like anything else I will be fine. I need to look to see how many coast of glaze and or Americana I can put on...
__________________
|
01-13-2012, 03:39 PM | #8 |
Drives: The shiny ones. Join Date: Mar 2010
Location: In the detail shop!
Posts: 5,979
|
1 coat glaze, 2 thin coats Americana will be about all.
Waxes don't "stack" so well beyond that... IMO 3 consecutive coats will be where you start to just waste product, beyond that you may actually begin to see a little clouding on the finish from product buildup. |
01-13-2012, 03:49 PM | #9 | |
Paul
|
Quote:
__________________
|
|
01-13-2012, 03:59 PM | #10 |
Drives: The shiny ones. Join Date: Mar 2010
Location: In the detail shop!
Posts: 5,979
|
Can't wait for the finished pics. Good luck.
|
01-13-2012, 07:56 PM | #11 |
"Detailing Devil Dog"
Drives: 2001 Corvette Coupe Join Date: Jan 2010
Location: Louisville, KY
Posts: 2,730
|
Now make sure that you wash or remove any dust off the car correctly so that the swirls don't return.
__________________
"Marines - Making the other guy die for his country for over 200 years."
|
01-13-2012, 08:17 PM | #12 | |
Paul
|
Quote:
I am already building my next order. 1 gallon refills of the Detail spray, Waterless wash and All purpose cleaner are on the list. I have to figure out the use of the quick sealant before I order. Not sure if I need it if I already use the Machine Super Sealant. Later on the list is the Jumbo Wheel and undercarriage kit. There goes my stripes money haha.
__________________
|
|
01-13-2012, 08:27 PM | #13 |
"Detailing Devil Dog"
Drives: 2001 Corvette Coupe Join Date: Jan 2010
Location: Louisville, KY
Posts: 2,730
|
If you have the Machine Super Sealant, then you don't necessarily need the Quick Sealant. I would start saving up for the Master Blaster if I were you. Remember, the less you touch the paint, the less opportunity there is for you to damage the paint.
__________________
"Marines - Making the other guy die for his country for over 200 years."
|
01-17-2012, 10:07 AM | #14 |
|
Congrats and looks great!
__________________
'11 IBM 2SS/RS Built and Tuned by Vengeance Racing Vengeance PCM
Vengeance Racing Mast Black Label LS7 Headed 416 ProCharger Stage II D1X Race ,Monster Triple,Alky Control Meth Inj, Forgestar F14 Drag Version and a bunch of other blah blah blah.838/688 at 12lbs Street Friendly |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GPC Custom Adams Sampler Kit With Bag | GPC1 | Wash/Wax/Detailing and Cosmetic Maintenance Parts | 1 | 09-19-2011 11:18 AM |
Loan rates and questions | ULTRAZLS1 | Camaro Price | Ordering | Tracking | Dealers Discussions | 46 | 01-28-2010 08:15 PM |
UPCOMING CAMARO IMPORTANT DATES | CamaroScotty | 5th Gen Camaro SS LS LT General Discussions | 125 | 01-11-2009 12:31 AM |
Toyota no. 1 in customer loyalty, GM close behind | Mr. Wyndham | Off-topic Discussions | 3 | 12-09-2007 02:20 AM |