F/S: Custom Carbon Fiber and Leather Wrapped Steering Wheel!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SS Mike · 08-11-2010, 01:08 PM

I have a custom carbon fiber and leather wrapped steering wheel for sale. This steering wheel will fit all 2010 Camaro applications. It is set up to receive your steering wheel controls. If you don't have any steering wheel controls, the ones in the pic are not included. The steering wheel controls are very easy to swap out once the steering wheel is off your car. This wheel is made with the highest quality materials, using a stock 2010 Camaro core so fitment will not be an issue at all. I have one on my car so I know there are no fitment issues. I love mine!

This particular wheel is flat bottom AND flat top. The reason for the flat top is for a race look, but also so that you can put the wheel position low without it blocking the gauges. I am asking $1099 shipped (including your core). There will be a $200 core charge that will be refunded as soon as your original wheel is received. Your original wheel must be received within 15 days of you receiving this wheel. It is made with high quality carbon fiber, leather, and the stitching is perfect. These are not mass produced, each one is made to order. This wheel is new and has never been installed before.

Thanks for looking everyone, enjoy!

Front

Front Top

Front Bottom

Front Side

SW Controls

Back

Back Side

Back Bottom

Here's a pic of mine installed:

SS Mike · 08-12-2010, 07:14 PM

PM me an offer guys, let me know what you think of the wheel!

d69chris · 08-14-2010, 11:41 PM

No radio controls?

Available with Orange stitching?

$1500, including my wheel?

Capthowdy · 08-14-2010, 11:54 PM

wew thats alot of scratch for a mod I barely noticed....

SS Mike · 08-15-2010, 12:07 AM

Quote:

Originally Posted by d69chris

No radio controls?

Available with Orange stitching?

$1500, including my wheel?

Hey! How have you been?

Yes i can do Orange stitching. $1500 plus your wheel. I just pm'd you.

-Mike

SS Mike · 08-15-2010, 12:22 AM

Quote:

Originally Posted by Capthowdy

wew thats alot of scratch for a mod I barely noticed....

Trust me, you notice it when you drive with this wheel in the car!

The Stig · 08-15-2010, 09:01 PM

Just saying Mike, and no disrespect but DSV and carbonfiberspecialists offer wheels similar to yours. I know DSV sells one with a flat bottom, and getting the more expensive version (CF on the sides) it only retails for $799 and that's w/o core.

SS Mike · 08-15-2010, 11:04 PM

Quote:

Originally Posted by stieger

Just saying Mike, and no disrespect but DSV and carbonfiberspecialists offer wheels similar to yours. I know DSV sells one with a flat bottom, and getting the more expensive version (CF on the sides) it only retails for $799 and that's w/o core.

Thank you for your reply and no offense taken. Please also understand that i dont make this wheel, i am selling it for a friend. I know DSV products well, tey make nothing but quality. This particular wheel isnt just a stock one wrapped, it is rebuilt fromthe ground up with more padding and a larger grip all the way around.

The reason i have to ask for a core is because as i sated before each of these wheels is made to order so there is no stock of steering wheels kept.

Thanks again for your response and opinion.

On another note, what do you think of the wheel itself?

Indpowr · 08-15-2010, 11:10 PM

Hey Mike. I think the wheel looks great. Good luck with the sell..

SS Mike · 08-16-2010, 02:23 AM

Quote:

Originally Posted by Indpowr

Hey Mike. I think the wheel looks great. Good luck with the sell..

Thank you sir!!!

SS Mike · 08-19-2010, 06:46 PM

Price reduced!!!!!

Jaysin · 08-19-2010, 09:16 PM

That wheel is awesome! Just too expensive

SS Mike · 08-23-2010, 05:11 PM

Bump!

DZ28 · 08-23-2010, 05:15 PM

Wonderful looking wheel, not so wonderful price. Would love it but price is way too high... sorry...

08-11-2010, 01:08 PM	#1
SS Mike Drives: 2010 Camaro SS/RS CGM M6 Join Date: Jun 2009 Location: Orange County, California Posts: 804	F/S: Custom Carbon Fiber and Leather Wrapped Steering Wheel!! Price Reduced! I have a custom carbon fiber and leather wrapped steering wheel for sale. This steering wheel will fit all 2010 Camaro applications. It is set up to receive your steering wheel controls. If you don't have any steering wheel controls, the ones in the pic are not included. The steering wheel controls are very easy to swap out once the steering wheel is off your car. This wheel is made with the highest quality materials, using a stock 2010 Camaro core so fitment will not be an issue at all. I have one on my car so I know there are no fitment issues. I love mine! This particular wheel is flat bottom AND flat top. The reason for the flat top is for a race look, but also so that you can put the wheel position low without it blocking the gauges. I am asking $1099 shipped (including your core). There will be a $200 core charge that will be refunded as soon as your original wheel is received. Your original wheel must be received within 15 days of you receiving this wheel. It is made with high quality carbon fiber, leather, and the stitching is perfect. These are not mass produced, each one is made to order. This wheel is new and has never been installed before. Thanks for looking everyone, enjoy! Front Front Top Front Bottom Front Side SW Controls Back Back Side Back Bottom Here's a pic of mine installed: __________________ Vortech V-3 Kit, ARH LT's, Custom Exhaust, Aeromotive A1000 Fuel System, Custom Tune - 582 rwhp 533 rwtq 22" Modulare H2 Wheels, CF Hood, Trunk, Spoiler & Roof by Carbon by Design, Custom Steering Wheel from P-Factor Brembo GT BBK, Alpine INA-900, Alpine Type-R Speakers, Hurst Shifter, APR Splitter, Custom Quad Tip Diffuser CKS C1 Coilovers, Falken 452 Tires, 265/35/22 & 285/35/22, Custom Grille, AAC Halos, and much more to come!! Last edited by SS Mike; 08-19-2010 at 06:46 PM.

08-12-2010, 07:14 PM	#2
SS Mike Drives: 2010 Camaro SS/RS CGM M6 Join Date: Jun 2009 Location: Orange County, California Posts: 804	PM me an offer guys, let me know what you think of the wheel! __________________ Vortech V-3 Kit, ARH LT's, Custom Exhaust, Aeromotive A1000 Fuel System, Custom Tune - 582 rwhp 533 rwtq 22" Modulare H2 Wheels, CF Hood, Trunk, Spoiler & Roof by Carbon by Design, Custom Steering Wheel from P-Factor Brembo GT BBK, Alpine INA-900, Alpine Type-R Speakers, Hurst Shifter, APR Splitter, Custom Quad Tip Diffuser CKS C1 Coilovers, Falken 452 Tires, 265/35/22 & 285/35/22, Custom Grille, AAC Halos, and much more to come!!

08-14-2010, 11:41 PM	#3
d69chris Florida C5 Drives: 2010 Camaro 2SS Vortech L99 IOM Join Date: Jul 2009 Location: Tequesta, FL Posts: 2,610 View My Garage	No radio controls? Available with Orange stitching? $1500, including my wheel? __________________ Ordered 11/08/08....Del. 08/05/2009 Loving every minute of it! Don't hate me because i'm Pretty....

08-15-2010, 09:01 PM	#7
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Just saying Mike, and no disrespect but DSV and carbonfiberspecialists offer wheels similar to yours. I know DSV sells one with a flat bottom, and getting the more expensive version (CF on the sides) it only retails for $799 and that's w/o core. __________________

08-19-2010, 06:46 PM	#11
SS Mike Drives: 2010 Camaro SS/RS CGM M6 Join Date: Jun 2009 Location: Orange County, California Posts: 804	Price reduced!!!!! __________________ Vortech V-3 Kit, ARH LT's, Custom Exhaust, Aeromotive A1000 Fuel System, Custom Tune - 582 rwhp 533 rwtq 22" Modulare H2 Wheels, CF Hood, Trunk, Spoiler & Roof by Carbon by Design, Custom Steering Wheel from P-Factor Brembo GT BBK, Alpine INA-900, Alpine Type-R Speakers, Hurst Shifter, APR Splitter, Custom Quad Tip Diffuser CKS C1 Coilovers, Falken 452 Tires, 265/35/22 & 285/35/22, Custom Grille, AAC Halos, and much more to come!!

08-14-2010, 11:54 PM	#4
Capthowdy Drives: 2010 2SS RS IOM Join Date: Jun 2010 Location: Fort Lauderdale Fl Posts: 1,048	wew thats alot of scratch for a mod I barely noticed....

08-15-2010, 11:10 PM	#9
Indpowr Account Suspended Drives: Corvette C6 Join Date: May 2008 Location: Florida Posts: 6,959 View My Garage	Hey Mike. I think the wheel looks great. Good luck with the sell..

08-19-2010, 09:16 PM	#12
Jaysin Drives: 2015 Chevrolet SS Join Date: Jul 2010 Location: St. Louis, MO Posts: 341	That wheel is awesome! Just too expensive

08-23-2010, 05:11 PM	#13
SS Mike Drives: 2010 Camaro SS/RS CGM M6 Join Date: Jun 2009 Location: Orange County, California Posts: 804	Bump! __________________ Vortech V-3 Kit, ARH LT's, Custom Exhaust, Aeromotive A1000 Fuel System, Custom Tune - 582 rwhp 533 rwtq 22" Modulare H2 Wheels, CF Hood, Trunk, Spoiler & Roof by Carbon by Design, Custom Steering Wheel from P-Factor Brembo GT BBK, Alpine INA-900, Alpine Type-R Speakers, Hurst Shifter, APR Splitter, Custom Quad Tip Diffuser CKS C1 Coilovers, Falken 452 Tires, 265/35/22 & 285/35/22, Custom Grille, AAC Halos, and much more to come!!

08-23-2010, 05:15 PM	#14
DZ28 Drives: 2023 ZL1 M6 Riverside Blue Join Date: Nov 2008 Location: Verrado, AZ Posts: 852	Wonderful looking wheel, not so wonderful price. Would love it but price is way too high... sorry... __________________ Sadly SOLD IBM 2SSRS Camaro M6... 2023 Riverside Blue ZL1 M6, 1 of 75

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First DSV Premium Flat Bottom Steering Wheel Leather & Carbon Fiber Sides (Pictures)	dsvcustoms	Interior Parts & Accessories	12	02-05-2011 07:20 PM
DSV NEW FULL Carbon Fiber Steering Wheel!!! Impressive (Pictures Inside)	dsvcustoms	Interior Parts & Accessories	14	02-03-2011 03:45 AM
F/S: Custom Carbon Fiber and Leather Wrapped Steering Wheel	SS Mike	Local Marketplace	21	11-13-2010 01:41 AM
Another DSV First! Custom Premium DStyle Steering Wheel For Camaro (Pictures Inside)	dsvcustoms	Interior Parts & Accessories	38	08-19-2010 11:27 PM
GIGANTIC GiveAwAy, 800 dollar Carbon Fiber steering wheel - Memorial Day!! GOOOO	Indpowr	Interior Parts & Accessories	324	06-01-2010 09:35 PM