Headers for ZL1 - Page 7 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tomster · 05-03-2013, 08:19 PM

Quote:

Originally Posted by MrDew

How does the sound change with headers only? Beside being a lot louder?

Will it become deeper or raspier? I hate the high pitched sound and popping on the stock system..

Raspier and more popping.... you have to swap the mufflers to get rid of that... I just did headers no cats and im not a fan of the sound ether. It does sound tough when you are on it shifting threw the gears. Like a NASCAR. not it does not sound good to my any other time. I am going to by some cats and see how that changes it. I hope to just make it a little quieter at least. (I dont want to take off the stock mufflers)

6710camaro · 05-09-2013, 01:26 PM

Does anyone have the part number? I do not want a header that I have to smash or crimp one of the tubes to fit around a motor mount or anything like that. Want a clean installation. Seems there are several vendors that say 2010 - 2013 SS and ZL1.

AMCBimmer · 05-09-2013, 01:55 PM

Quote:

Originally Posted by 6710camaro

Does anyone have the part number? I do not want a header that I have to smash or crimp one of the tubes to fit around a motor mount or anything like that. Want a clean installation. Seems there are several vendors that say 2010 - 2013 SS and ZL1.

Maryland Speed sold me mine and they had to be smashed. I was not happy but obviously no posts from them to me after they were sold to me.

Jer4251 · 07-18-2013, 07:04 PM

anyone running texas speed 2" longtubes?

Stephen12ZL1 · 07-18-2013, 07:49 PM

Quote:

Originally Posted by Jer4251

anyone running texas speed 2" longtubes?

baron has the 2" and I have 1 7/8"....they fit great!

Jer4251 · 07-18-2013, 07:58 PM

I think im about to order them with off road pipes. they informed me about the electric steering shaft boot as well, if you just remove it completely its all good?

Garys16SS · 07-19-2013, 07:27 AM

I installed the Stainless Power 17/8" with cats about 2 months ago and no problems. Paid $746 delivered.

ZL1_Gary · 08-21-2013, 04:00 PM

I'm in the market for headers too. Did any of these manufactures fix the belly pan trimming? Just seems kinda weird to me why someone would want to modify a part to "work" right.

Jer4251 · 08-21-2013, 04:02 PM

Quote:

Originally Posted by ZL1_Gary

I'm in the market for headers too. Did any of these manufactures fix the belly pan trimming? Just seems kinda weird to me why someone would want to modify a part to "work" right.

There is not enough room between the pan and body to squeeze long tubes. Cutting the pan is required. No way around it unless you have a convertible.

JDP Sales · 08-21-2013, 04:05 PM

Quote:

Originally Posted by ZL1_Gary

I'm in the market for headers too. Did any of these manufactures fix the belly pan trimming? Just seems kinda weird to me why someone would want to modify a part to "work" right.

You do not have to cut the belly pan with Pfadt Tri-Y headers. Feel free to call, PM or email me with questions.

Best regards,

Tyler
888-308-6007

ZL1_Gary · 08-21-2013, 04:12 PM

Quote:

Originally Posted by Jer4251

There is not enough room between the pan and body to squeeze long tubes. Cutting the pan is required. No way around it unless you have a convertible.

Check out this thread that I just saw: http://www.camaro5.com/forums/showthread.php?t=310183

Looks like there is a way around it.

Quote:

Originally Posted by Sales@JDP

You do not have to cut the belly pan with Pfadt Tri-Y headers. Feel free to call, PM or email me with questions.

Best regards,

Tyler
888-308-6007

Thanks Tyler, I just saw that thread above that I linked to that confirms your statement. I gotta get some headers in a month or so. Gonna take a serious look at these. Hadn't heard of them.

JDP Sales · 08-21-2013, 04:17 PM

Quote:

Originally Posted by ZL1_Gary

Check out this thread that I just saw: http://www.camaro5.com/forums/showthread.php?t=310183

Looks like there is a way around it.

Thanks Tyler, I just saw that thread above that I linked to that confirms your statement. I gotta get some headers in a month or so. Gonna take a serious look at these. Hadn't heard of them.

Yeah they are fairly new to hit the market for the Camaro, but the Corvette guys have been using them for sometime now. Definitely some high quality headers! We have hands on experience installing them as well, so if you have any questions feel free to ask!

Best regards,

Tyler
888-308-6007

charlietuna · 08-21-2013, 05:42 PM

Quote:

Originally Posted by Sales@JDP

Yeah they are fairly new to hit the market for the Camaro, but the Corvette guys have been using them for sometime now. Definitely some high quality headers! We have hands on experience installing them as well, so if you have any questions feel free to ask!

Best regards,

Tyler
888-308-6007

Tyler PM me with the $$$$ with shipping to 60026

JDP Sales · 08-21-2013, 06:09 PM

Quote:

Originally Posted by charlietuna

Tyler PM me with the $$$$ with shipping to 60026

PM sent! Let me know if you have any questions!

Best regards,

Tyler
888-308-6007

07-18-2013, 07:04 PM	#88
Jer4251 Camaro Addict Drives: too many Join Date: Sep 2009 Location: 912 Posts: 1,274	anyone running texas speed 2" longtubes? __________________ 1990 IROC-Z Vert LS 1996 SS Vert LT4 1992 Z28 Z03 T5 1992 Z28 Z03 L98 2018 Sierra Denali 6.2 1997 Z28 Z4C 1995 Z28

07-18-2013, 07:58 PM	#90
Jer4251 Camaro Addict Drives: too many Join Date: Sep 2009 Location: 912 Posts: 1,274	I think im about to order them with off road pipes. they informed me about the electric steering shaft boot as well, if you just remove it completely its all good? __________________ 1990 IROC-Z Vert LS 1996 SS Vert LT4 1992 Z28 Z03 T5 1992 Z28 Z03 L98 2018 Sierra Denali 6.2 1997 Z28 Z4C 1995 Z28

07-19-2013, 07:27 AM	#91
Garys16SS Drives: 2016 SS, BLACK, MANUAL Join Date: Apr 2010 Location: pittsburgh, pa Posts: 277	I installed the Stainless Power 17/8" with cats about 2 months ago and no problems. Paid $746 delivered. __________________ 2016 Black/Black SS, 6speed, MRC, Roto-Fab air intake, Vitesse controller, 1 7/8" headers and exhaust from Stainless Works complete with nonNPP mufflers and 5"outlets, Katech ported TB, Moroso catch can, MRR M017 polished powder wheels, Eibach lowering springs, and BMR upper/ lower trailing arms and upper control arms. ZL1/1le sway bars and Magnusson Supercharger with Jannetty tune. Stay Tuned!!!......More to come. 2014 Camaro Ashen grey, 3.6, 6 speed, Vararam intake, Elite catch can, chrome wheels, and Vitesse controller. 2003 SSR red, 2016 Vette

05-09-2013, 01:26 PM	#86
6710camaro Drives: 2012 Camaro ZL1 Join Date: Nov 2009 Location: Corrales, New Mexico Posts: 12	Does anyone have the part number? I do not want a header that I have to smash or crimp one of the tubes to fit around a motor mount or anything like that. Want a clean installation. Seems there are several vendors that say 2010 - 2013 SS and ZL1.

08-21-2013, 04:00 PM	#92
ZL1_Gary Drives: Camaro Join Date: Aug 2013 Location: THE Ohio State Posts: 11	I'm in the market for headers too. Did any of these manufactures fix the belly pan trimming? Just seems kinda weird to me why someone would want to modify a part to "work" right.