Wheel Liner Screw - Sill Body Mounting ripped

[redleader]

So, you know where your front wheel liner (behind the wheel) screws into the lower sill?

Well, my inner screw clip no longer has any 'sill lip' to attach too, as the screw had rusted and the metal clip et-el ripped it off.

Is there a solution to bridge or replace this 'sill lip' so I can get the metal clip back on to screw into?

[DARK AGE 53]

Find the correct size and one of these should work.

[redleader]

Thanks DARK AGE 53 but it's not the Plugs that hold the Wheel Liner, it's the Screws as per the picture location above.

They look like this:

[redleader]

Anyone?
Body shop repair Guys?
Photo?
Thx.

[blake-b]

It screws into the rocker panel. You might need to replace the rocker depending upon further inspection.

http://parts.nalleygmc.com/showAssem...rimLevel=15398

[redleader]

Thx, going to rough up the inside of the panel and glue a metal lip edge to span the ripped off lip...