06-20-2013, 07:59 PM | #1 |
Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
|
Garage Floor
Well some new BFGs (all terrains on my truck) pulled up a few small sections of the painted garage floor so I decided to patch, clean, repaint, and clear coat. Also patched a few chips that occourred over the last few years from dropping tools and such. So far half of the garage is completed. Just thought I would share photos. The rustoleum professional garage floor paint and clear coat is a nice system. The cones are to remind my wife and 3 yr old to stay off that side
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680 |
06-20-2013, 10:57 PM | #2 |
Drives: 2012 LS3 CRM, V8 Healey, Mini Join Date: Jun 2012
Location: MI
Posts: 103
|
I used the same system. The clear really makes it pop. How did you prep the old painted surface? Mine's starting to pull up a little at the tires too.
|
06-21-2013, 12:23 AM | #3 |
Drives: 2014 1LE Camaro, 95 Z28 Camaro Join Date: Jun 2011
Location: America
Posts: 940
|
where did you get this set up
__________________
2014 1LE 2SS Camaro Recaro seats, Custom Cam, Kooks LT headers, CAI intake, Z/28 Spoiler, Z/28 Belly Pan, Z/28 Brake Air Ducts, Stainless Steel breaklines, BMR Toe Rods and Trailing Arms resulting in 482.49 RWHP
|
06-21-2013, 12:33 AM | #4 |
Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
|
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680 |
06-21-2013, 03:57 AM | #5 |
Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
|
Basically I got up as much loose stuff as I could (using a scraper) and then applied the rustoelum epoxy patch to those ares. I then sanded the epoxy patch cleaned and painted over.
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680 |
06-21-2013, 07:07 AM | #6 |
Drives: 2011 Z06, 2004 Cobra, 1991 MR2Turbo Join Date: Dec 2011
Location: Delaware
Posts: 472
|
How long have you had your setup?
I'm worried about painting and then peeling.
__________________
|
06-21-2013, 03:46 PM | #7 |
Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
|
3 yrs no peeling until new tires. I now use some plastic floor tiles to park on so it won't pickup the paint
I will post pics of these later Ryan
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680 |
06-21-2013, 04:14 PM | #8 |
Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
|
Pics of floor tiles
Ryan
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680 |
09-07-2013, 04:36 AM | #9 |
Drives: 1968 Camaro SS & 2015 GMC Sierra De Join Date: Nov 2012
Location: Camp Lejeune, NC
Posts: 94
|
How does the clear deal with fuel. I have the Armor Coat brand on my floor and it doesnt fair so well. I changed out my fuel pump and spilled a little on it and ruined the clear coat. I wiped it away which spread it and made it worse, looks pretty bad.
__________________
Whipple SC, Lingenfelter Heads & Cam, ACT Twin Disc Clutch, Rotofab CAI, JBA 1 7/8" Long Tube Headers & 3" Exhaust, Livernois Motorsports Fuel Pump, DSS 1400Hp Axles
RWHP 660 RWTQ 618 SOLD |
09-07-2013, 06:55 AM | #10 |
Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
|
on mine it wipes right up. I have spilled some while filling the mower
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680 |
|
|
|
|