04-19-2013, 12:08 AM | #1 |
Splitter rub guard washers
Anybody know if this item will fit a 1LE? They are splitter screw guard washers to keep from rubbing the screws down when the splitter is scraped.
Last edited by Skylane765; 04-20-2013 at 02:34 PM. |
|
04-19-2013, 08:08 PM | #2 |
Drives: 2013 2SS/RS/1LE Join Date: Apr 2010
Location: St Louis, MO
Posts: 3,087
|
I will have to take a look at my car and see. I'll try to remember and respond this weekend...unless some else does first.
I want to say yes. Because I have the front plate mount (not installed yet) and it bolts up under the splitter in the center of the car. |
04-20-2013, 02:29 PM | #3 |
Ok, let me know we just need to know how many are needed for the 1LE splitter, I will send you a set no charge if you try them out on a 1LE.
|
|
04-21-2013, 09:03 AM | #4 |
Drives: 2013 2SS/RS/1LE Join Date: Apr 2010
Location: St Louis, MO
Posts: 3,087
|
I will try to remember to get some better pictures later with the car out of the garage.
Not being able to jack the car makes the angle difficult. In any case, here is what I got so far. From what I can see, the screws are all recessed on the 1LE splitter. More to come later. |
04-22-2013, 03:25 AM | #5 |
It's all hers.
Drives: 2015 ZL1 Join Date: Jan 2012
Location: Djibouti - Horn of Africa / Wellsville NY
Posts: 719
|
I'd like a set of the washers and if someone is thinking of making a skid plate like is available for the ZL1 I'd consider that too..............
__________________
#846
|
04-22-2013, 06:50 PM | #6 |
Drives: 2013 2SS/RS/1LE Join Date: Apr 2010
Location: St Louis, MO
Posts: 3,087
|
I didn't have time to get any more pictures, busy weekend. If you still want/need some more of a 1LE, just let me know.
|
12-20-2014, 02:20 PM | #7 |
Who sells these I remember seeing them but now can't remember.....thx
|
|
12-20-2014, 08:26 PM | #8 |
Drives: 2015 Camaro 1SS,6 Speed,NPP Exhaust Join Date: Dec 2012
Location: Florida
Posts: 1,842
|
|
12-20-2014, 10:02 PM | #9 | |
KaBoom1701
Drives: 13' ZL1 Red M6 Join Date: Dec 2012
Location: I.E. SoCal (Yucaipa)
Posts: 8,630
|
Quote:
www.zl1addons.com
__________________
Mods:
Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats. |
|
|
|
|
|