Some nice runs for the SS and I... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MadMav · 06-12-2010, 04:56 PM

It appears I had some pretty good runs on Wednesday. Bandimere Speeway. Elevation 5800', temp was just over 80 degrees. Density Altitude corrections for each run are below.

Here are my best three runs..
60'.......1/4.........MPH.......DA......converted 1/4 & MPH
2.143....13.846....103.59...8932....12.28@116.14
2.201....13.929....103.36...8961....12.348@115.924
2.124....13.896....103.28...8944....12.322@115.81

These numbers are from dragtimes.com DA calculator for Bandimere Wednesday. If the corrections are correct then that puts me pretty near the top on the unofficial 1/4 miles list here on Camaro5 and I'm happy with that.

Mods are below.

10 of my 12 runs were in the 103mph range, and all of those runs were within 3 tenths of each other. Ran 1/10th quicker and .2 mph faster than a '09 BMW M5(don't know if it was stock), and ran 2/10s quicker and 3mph faster than an '09 CTS-V. Pretty awesome night!

Mav

(Not sure where this DA on the slip came from, but it's what I wrote on the slip at the time)

Three possible DAs near this run from Tracktimes.com...
4:53PM DA....8938...12.279 @ 116.15 MPH
5:51PM DA....8763...12.31 @ 115.895 MPH
5:52PM DA....8961...12.275 @ 116.182 MPH

Not sure which to use.

*Milk 1027* · 06-12-2010, 05:04 PM

Unless I'm missing something, all you have is ADM race intake, full exhaust from headers back and a tune?

Those are some damn good times.

WiccaJew · 06-12-2010, 05:10 PM

Nice times

MadMav · 06-12-2010, 05:38 PM

Yeah, ADM race intake without scoop(I'm lazy), This exhaust setup....http://www.texas-speed.com/shop/item...=1083&catid=20 (without cats), and dyno tune. Plus the short throw, trailing arms and stock tires. 4060lbs race weight.

Mav

Dan@showstopper · 06-12-2010, 11:55 PM

Bring that 60' down and you will run 11's with bolt-on's. That's my plan.

MadMav · 06-13-2010, 12:55 PM

That would be nice!

Mav

06-12-2010, 04:56 PM	#1
MadMav Drives: 2010 SS/RS M6 Join Date: Nov 2009 Location: Falcon, CO Posts: 661	Some nice runs for the SS and I... It appears I had some pretty good runs on Wednesday. Bandimere Speeway. Elevation 5800', temp was just over 80 degrees. Density Altitude corrections for each run are below. Here are my best three runs.. 60'.......1/4.........MPH.......DA......converted 1/4 & MPH 2.143....13.846....103.59...8932....12.28@116.14 2.201....13.929....103.36...8961....12.348@115.924 2.124....13.896....103.28...8944....12.322@115.81 These numbers are from dragtimes.com DA calculator for Bandimere Wednesday. If the corrections are correct then that puts me pretty near the top on the unofficial 1/4 miles list here on Camaro5 and I'm happy with that. Mods are below. 10 of my 12 runs were in the 103mph range, and all of those runs were within 3 tenths of each other. Ran 1/10th quicker and .2 mph faster than a '09 BMW M5(don't know if it was stock), and ran 2/10s quicker and 3mph faster than an '09 CTS-V. Pretty awesome night! Mav (Not sure where this DA on the slip came from, but it's what I wrote on the slip at the time) Three possible DAs near this run from Tracktimes.com... 4:53PM DA....8938...12.279 @ 116.15 MPH 5:51PM DA....8763...12.31 @ 115.895 MPH 5:52PM DA....8961...12.275 @ 116.182 MPH Not sure which to use. Attached Images __________________ SS/RS M6, SIM, CGM stripes, Barton S/T, BMR trailing arms, ADM Race intake(no scoop), Texas Speed 1 7/8" headers and full 3" exhaust, RMCR custom tune. Last edited by MadMav; 06-13-2010 at 07:53 PM.

06-12-2010, 05:04 PM	#2
Milk 1027 Camaro➎ moderator Drives: '13 BLK 1LE Join Date: Aug 2008 Location: AZ Posts: 13,567 View My Garage	Unless I'm missing something, all you have is ADM race intake, full exhaust from headers back and a tune? Those are some damn good times. __________________

06-12-2010, 05:38 PM	#4
MadMav Drives: 2010 SS/RS M6 Join Date: Nov 2009 Location: Falcon, CO Posts: 661	Yeah, ADM race intake without scoop(I'm lazy), This exhaust setup....http://www.texas-speed.com/shop/item...=1083&catid=20 (without cats), and dyno tune. Plus the short throw, trailing arms and stock tires. 4060lbs race weight. Mav __________________ SS/RS M6, SIM, CGM stripes, Barton S/T, BMR trailing arms, ADM Race intake(no scoop), Texas Speed 1 7/8" headers and full 3" exhaust, RMCR custom tune.

06-13-2010, 12:55 PM	#6
MadMav Drives: 2010 SS/RS M6 Join Date: Nov 2009 Location: Falcon, CO Posts: 661	That would be nice! Mav __________________ SS/RS M6, SIM, CGM stripes, Barton S/T, BMR trailing arms, ADM Race intake(no scoop), Texas Speed 1 7/8" headers and full 3" exhaust, RMCR custom tune.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro5 invites you to say thanks to Camaro assemblers and tour the Martinrea plant!	Hylton	5th Gen Camaro SS LS LT General Discussions	646	12-23-2009 03:41 PM
Black SS Camaro Delivered Video (NICE)	theshadow1234	Camaro Photos \| Spyshots \| Video \| Media Gallery	5	05-02-2009 09:46 AM
Camaro LS / LT / RS / SS specs and options!	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	119	09-02-2008 09:46 PM
camaro ss or 06 vette?	Robin	5th Gen Camaro SS LS LT General Discussions	45	08-23-2008 05:10 PM
MT runs piece on production 5thgen	Scotsman	5th Gen Camaro SS LS LT General Discussions	46	07-29-2008 11:04 PM

06-12-2010, 05:10 PM	#3
WiccaJew Drives: Black & Blue 1SS Join Date: Apr 2010 Location: Back In The Desert Posts: 1,257 View My Garage	Nice times

06-12-2010, 11:55 PM	#5
Dan@showstopper Drives: 2010 Camaro SS Join Date: Feb 2010 Location: Illinois Posts: 499	Bring that 60' down and you will run 11's with bolt-on's. That's my plan.