2014 Heat extractor on a 2010 hood - Page 16 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Dexter9522 · 07-15-2014, 07:53 AM

Installed mine without the alluminum pieces. Just got longer bolts to replace the stock ones that come on the vent itself and drilled into drip tray and it's flush ad snug.

Eddiefuzz · 07-15-2014, 04:20 PM

Quote:

Originally Posted by Dexter9522

Installed mine without the alluminum pieces. Just got longer bolts to replace the stock ones that come on the vent itself and drilled into drip tray and it's flush ad snug.

So you can't drive without the drip tray, because the extractor will blow out.

ZWA SS · 07-21-2014, 04:39 PM

How did you guys make the aluminum straps?
Also lost of bolts used please.

Jerry7297 · 07-22-2014, 11:15 AM

Quote:

Originally Posted by ZWA SS

How did you guys make the aluminum straps?
Also lost of bolts used please.

For the Aluminum straps just measure and cut them to the desired length. I just held mine up to the hood and extractor. I marked where to cut it and where to drill the holes.

As for bolts. I used the stock bolts but I did not use the factory rain tray. "Eddiefuzz" popped out the stock bolts and bought toilet bolts from the hardware store if you want to use the stock rain tray and be able to remove it. . He said the head of those bolts fit nicely into the slots of the extractor. As long as you can get the bolt head into the stock bolt opening you should be good. I would use 1/4 inch if possible just my opinion.

AuburnGrad93 · 07-22-2014, 11:40 AM

Quote:

Originally Posted by Eddiefuzz

The bolts that come with the extractor are too short. The 14 SS hood is made with cross supports and the water deflector is held up with 6 pushy things. I used toilet bolts, the square head slips right into the same spot as the oem bolts, but the are longer. I also put aluminum along the sides of the extractor , underside of the hood. I haven't had time to take pics.

So when you get time, really would like to see pictures of how you did yours! Still waiting on wife's permission to pull the trigger on this, but soon!! LOL

Eddiefuzz · 07-22-2014, 06:45 PM

Quote:

Originally Posted by AuburnGrad93

So when you get time, really would like to see pictures of how you did yours! Still waiting on wife's permission to pull the trigger on this, but soon!! LOL

I'll try to take them tomorrow, I have to send them to Jerry, He post them for me.

Jerry7297 · 07-23-2014, 09:48 AM

Quote:

Originally Posted by Eddiefuzz

I'll try to take them tomorrow, I have to send them to Jerry, He post them for me.

Mean Green Z28 · 07-23-2014, 10:25 AM

sooo, not sure if anyone asked this before...

Can you just swap hoods with a 2014+ SS?

RayZ28 · 07-23-2014, 01:05 PM

did anyone do anything as far as the top of the radiator goes..? i noticed the '14s have a piece that carries the water down the sides of the radiator.. '13s and under dont have that..

Angrybird 12 · 07-23-2014, 01:31 PM

Quote:

Originally Posted by RayZ28

did anyone do anything as far as the top of the radiator goes..? i noticed the '14s have a piece that carries the water down the sides of the radiator.. '13s and under dont have that..

Probably the same one that the ZL1 uses. I bought one after installing my TL1 insert. The 2012 up Camaros have the provisions to install one.

If anyone has a picture of the 2014 SS deflector on the radiator top I can verify if its the same or not.

Jerry7297 · 07-23-2014, 04:42 PM

Quote:

Originally Posted by Mean Green Z28

sooo, not sure if anyone asked this before...

Can you just swap hoods with a 2014+ SS?

You can swap hoods but the Cowl lines do not meet up perfectly to the front fascia from what I remember reading. User on C5 Nutro has added the 14 hood but he went to a ZL1 fascia also....

911medic · 07-25-2014, 06:34 PM

So it sounds like the complete package is the hood vent, the rain tray, and the radiator "deflector"?

RayZ28 · 07-28-2014, 04:04 PM

Quote:

Originally Posted by 911medic

So it sounds like the complete package is the hood vent, the rain tray, and the radiator "deflector"?

i havent been able to find the radiator piece..

Angrybird 12 · 07-28-2014, 09:21 PM

Quote:

Originally Posted by RayZ28

i havent been able to find the radiator piece..

PM MaureenM@rodgerschevrolet and ask her, she should be able to help you out.

Update: I just found this picture of a 2014 Camaro SS another member posted and from that I can tell the water deflector on the radiator is the same as the ZL1 one I put on my car. I bought mine from Maureen.
Here is the part number and what GM Calls it
P/N: 22828415 - Baffle

07-15-2014, 07:53 AM	#211
Dexter9522 Drives: SS Join Date: May 2013 Location: Az Posts: 273	Installed mine without the alluminum pieces. Just got longer bolts to replace the stock ones that come on the vent itself and drilled into drip tray and it's flush ad snug. __________________ 2013 ss M6 471 / 428 adm intake / texas speed 1 7/8 long tubes no cats / npp / slp underdive pulley / cordes performance defibrillator cam / ported throttle body, intake manifold by CPR tuning by nic D

07-21-2014, 04:39 PM	#213
ZWA SS BowtieBelle's SS Drives: 2010 Camaro SS Join Date: Jan 2012 Location: Perry, ok Posts: 1,074	How did you guys make the aluminum straps? Also lost of bolts used please. __________________ My Z/SS http://www.camaro5.com/forums/showthread.php?t=286858 .

07-23-2014, 10:25 AM	#218
Mean Green Z28 Drives: 2010 2SS Join Date: Aug 2013 Location: Annapolis, MD Posts: 941 View My Garage	sooo, not sure if anyone asked this before... Can you just swap hoods with a 2014+ SS? __________________ 2010 2SS - CAI Intake, ADM Scoop, RotoFab Washer relo. LT Headers and off-road pipes, X-pipe, Muffler Deletes, ZL1 Spoiler, Technostalgia Tail-lights '98 T/A (Sold) - Forged 6.0ltr, MS3, P&P'd Heads/Valves, 90MM FAST/TB, Headers, 3" Y-pipe, 4" Mufflex Catback. Koni Adjustables w/GC coilovers (550/175), Strano Sway Bars '94 Z28 (Sold) ... LS1 swap (basically same setup as the T/A), TH350/3500 stall ... swapped it all into the T/A -- >> Some of my Projects My Fquick Page

07-23-2014, 01:05 PM	#219
RayZ28 So-Cal Camaro Invasion Drives: Autobot Join Date: Feb 2013 Location: Tha Valley Posts: 693	did anyone do anything as far as the top of the radiator goes..? i noticed the '14s have a piece that carries the water down the sides of the radiator.. '13s and under dont have that.. __________________

07-25-2014, 06:34 PM	#222
911medic Drives: 2012 SIM 2LT/1970 Camaro Join Date: Nov 2012 Location: Near Minneapolis, MN Posts: 1,578	So it sounds like the complete package is the hood vent, the rain tray, and the radiator "deflector"? __________________ All bleeding stops eventually -- 2012 2LT Auto w/sunroof -- My journal thread Roto-Fab Intake & W/W Relocate Kit -- ADM Race Scoop -- Dynomax VT Axle-Back Exhaust -- Vitesse Throttle Controller RX Catch Can -- Drake Bowtie Delete -- JacFab Radio Face Cover -- LED Fog Lights -- LED Dome/Trunk/Plate Lights -- Gen5DIY Dash ABL -- Diode Dynamics Cupholder Lighting Wishlist: ACS T5 Splitter -- Hood Vent Mod -- Footwell/Door Pull/Homelink Button Lighting