New 2010-12 Camaro Front Splitter! ZL Inspired! Available Pre-Painted! Intro Sale! - Page 15 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RPI Designs · 03-23-2012, 08:09 PM

Quote:

Originally Posted by dragon22

WOW! That IS sharp! Makes it look like a different front end, doesn't it?

I love it on my 2SS

hrpiii · 03-24-2012, 04:55 AM

Love my new Splitter!

Packaging - A++
Fit - A++
Paint Match - PERFECT

Me and my friend tackled this yesterday. We had seen comments where you did not need to remove the front to install, and that was the case with our option. BUT, you really need small, long arms to reach underneath, and all the way to the front. You will probably lose some skin reaching and holding things, ask me and my friend. But nothing good comes without a little sacrifice.

If you can easily take the front off, do it, it will save a little frustration of holding, dropping, reaching to bolt the splitter on. We managed without, so it's "installers choice".

here are some pics I took along the way. If anyone has any specific pics, I would be glad to take them also.

RPI Designs · 03-24-2012, 07:24 AM

Quote:

Originally Posted by hrpiii

Love my new Splitter!

Packaging - A++
Fit - A++
Paint Match - PERFECT

Me and my friend tackled this yesterday. We had seen comments where you did not need to remove the front to install, and that was the case with our option. BUT, you really need small, long arms to reach underneath, and all the way to the front. You will probably lose some skin reaching and holding things, ask me and my friend. But nothing good comes without a little sacrifice.

If you can easily take the front off, do it, it will save a little frustration of holding, dropping, reaching to bolt the splitter on. We managed without, so it's "installers choice".

here are some pics I took along the way. If anyone has any specific pics, I would be glad to take them also.

That looks great along with the side skirts too. Great pictures, would you mind if we use some on our website?

ljustin293 · 03-24-2012, 01:35 PM

Lot more pictures coming today.

hrpiii · 03-24-2012, 02:53 PM

Quote:

Originally Posted by RPI Designs

That looks great along with the side skirts too. Great pictures, would you mind if we use some on our website?

use all you want, I am very happy with them.

I tried to get pics from different angles.

bannonm · 03-24-2012, 03:27 PM

I was going to buy the SLP, but I like this one even more. Do any of your color choices match the ZL1 side skirt color? I just bought the ZL1 mud flaps and would like to match that color black.

Sent from my DROID RAZR using Tapatalk

RPI Designs · 03-24-2012, 08:39 PM

Quote:

Originally Posted by hrpiii

use all you want, I am very happy with them.

I tried to get pics from different angles.

Thanks, we appriciate that!

RPI Designs · 03-24-2012, 08:40 PM

Quote:

Originally Posted by bannonm

I was going to buy the SLP, but I like this one even more. Do any of your color choices match the ZL1 side skirt color? I just bought the ZL1 mud flaps and would like to match that color black.

Sent from my DROID RAZR using Tapatalk

Glad to hear you like it. The flat black color choice would matxh your ZL1 side skirts color.

FurySS · 03-24-2012, 11:17 PM

Quote:

Originally Posted by hrpiii

You will probably lose some skin reaching and holding things, ask me and my friend. But nothing good comes without a little sacrifice.

First I will say this splitter is wonderfully designed and fits awesomely

, I assisted hrpiii with the install and just like he said you can do it with the bumper on. It is VERY tight and especially uncomfortable squeezing past the frame rails to reach the bolts. If you can force your hand in there - it will likely look like this when you are done (and be sore for days)

.. BUT you can do it, No pain - no gain!

We attached at the wheel wells first and then used padded jack stands to support the center while we worked around.

RPI Designs · 03-25-2012, 01:08 PM

Quote:

Originally Posted by 2010 Indy Pace

First I will say this splitter is wonderfully designed and fits awesomely

, I assisted hrpiii with the install and just like he said you can do it with the bumper on. It is VERY tight and especially uncomfortable squeezing past the frame rails to reach the bolts. If you can force your hand in there - it will likely look like this when you are done (and be sore for days)

.. BUT you can do it, No pain - no gain!

We attached at the wheel wells first and then used padded jack stands to support the center while we worked around.

That looks like it hurt! My arm must be a little smaller. I didnt look like that! But overall are you happy with the look?

FurySS · 03-25-2012, 01:17 PM

Quote:

Originally Posted by RPI Designs

That looks like it hurt! My arm must be a little smaller. I didnt look like that! But overall are you happy with the look?

Maybe you have longer fingers too

. I just kept pushing my hand in until I I could reach the bolts.

I think compared to SLP & Lingenfelter it has the BEST finished appearance no question

No unsightly gaps or openings after the install! Great job on this guys!

ljustin293 · 03-25-2012, 04:17 PM

some comparison to stock and other pics

dragon22 · 03-25-2012, 04:25 PM

Looks outstanding! Can't wait to receive mine.

2010camarolt · 03-25-2012, 04:29 PM

any update on the the splitter for the v6?

03-24-2012, 04:55 AM	#198
hrpiii AKA "Beefcake" Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009 Location: Indy Posts: 8,528	Love my new Splitter! Packaging - A++ Fit - A++ Paint Match - PERFECT Me and my friend tackled this yesterday. We had seen comments where you did not need to remove the front to install, and that was the case with our option. BUT, you really need small, long arms to reach underneath, and all the way to the front. You will probably lose some skin reaching and holding things, ask me and my friend. But nothing good comes without a little sacrifice. If you can easily take the front off, do it, it will save a little frustration of holding, dropping, reaching to bolt the splitter on. We managed without, so it's "installers choice". here are some pics I took along the way. If anyone has any specific pics, I would be glad to take them also. Attached Images

03-24-2012, 01:35 PM	#200
ljustin293 Drives: 2010 VR CAMARO 2SS/RS Join Date: Aug 2008 Location: GA Posts: 15,060 View My Garage	Lot more pictures coming today. Attached Images

03-24-2012, 03:27 PM	#202
bannonm Drives: 2011 2SS/RS M6 VR Join Date: Aug 2011 Location: Chicagoland Posts: 1,536	I was going to buy the SLP, but I like this one even more. Do any of your color choices match the ZL1 side skirt color? I just bought the ZL1 mud flaps and would like to match that color black. Sent from my DROID RAZR using Tapatalk __________________

03-25-2012, 04:17 PM	#208
ljustin293 Drives: 2010 VR CAMARO 2SS/RS Join Date: Aug 2008 Location: GA Posts: 15,060 View My Garage	some comparison to stock and other pics Attached Images

03-25-2012, 04:29 PM	#210
2010camarolt Drives: Victory Red 1LT Join Date: Aug 2010 Location: Central Jersey Posts: 2,173 View My Garage	any update on the the splitter for the v6? __________________

03-25-2012, 04:25 PM	#209
dragon22 Drives: 2010 Camaro 2SS/RS SIM Join Date: Apr 2009 Location: Calgary, Alberta Posts: 1,697 View My Garage	Looks outstanding! Can't wait to receive mine.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does the v6 have enough power?	cstproductions	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	305	08-29-2012 09:27 PM
SEMA Show 2011 - New Camaro Products Showcase!	Sean@Phastek	Camaro Photos \| Spyshots \| Video \| Media Gallery	85	01-16-2012 10:51 PM