Mirror Image Autoworks 15" kit Ruined My Wheels - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

FasNuf · 11-01-2019, 06:14 AM

Why are Photobucket pics always blurred? Not to change the subject, just askin'

BMR Sales · 11-01-2019, 11:59 AM

Quote:

Originally Posted by FasNuf

Why are Photobucket pics always blurred? Not to change the subject, just askin'

the was because PhotoBucket sucks - first they try to ransom all their customers and now if you want to see your own picture ( not blurry) they want you to pay

Avenging Orange · 11-01-2019, 10:26 PM

I like this post....its exciting.

1JEWLDSSRS · 11-02-2019, 12:42 PM

Quote:

Originally Posted by BMR Sales

the was because PhotoBucket sucks - first they try to ransom all their customers and now if you want to see your own picture ( not blurry) they want you to pay

^^^^^ this, they suck and like OP says, they want money. They said my account was locked due to going over my MB's, well I wasn't over my MB's before they changed it !! So they suspended the account and asked for money to "make it better" lol.. Now all my pics I can't get to because it won't let me delete any older ones !! Go figure..

olblue75 · 11-03-2019, 09:43 AM

We went from a suspension issue to a photobucket issue, how’d that happen???

Avalnch · 11-08-2019, 06:47 PM

Quote:

Originally Posted by olblue75

We went from a suspension issue to a photobucket issue, how’d that happen???

Let's get back on topic.

Am I the only one thinking that the install shop should have checked clearances during and after the install?

lemontwist · 11-08-2019, 07:49 PM

so i got to ask. don't you think the shop that did the installation should have noticed a possible clearance issue??
i get it not everyone has a place to handle working on a car.i do almost all my own work and i would have installed the kit myself that way i have no one to blame but myself. i may have questioned the amount of clearance while i was doing the job,now the alignment i would have a shop do.
not to sound like a dic there may be a problem with the kit you got IDK and if your not happy with the customer service than that's your right to be unhappy problems with the kit and company aside.if you are dragging the car and doing a 15in conversion it stands to reason you would do some work on your car yourself.don't get me wrong i'm not blaming you.
i have a question for camaro5 members......do alot of you guys that drag and autocross you cars pay other people to do the work and mods?????

CamaroDreams76 · 11-09-2019, 07:05 AM

Quote:

Originally Posted by lemontwist

so i got to ask. don't you think the shop that did the installation should have noticed a possible clearance issue??
i get it not everyone has a place to handle working on a car.i do almost all my own work and i would have installed the kit myself that way i have no one to blame buy myself. i may have questioned the amount of clearance while i was doing the job,now the alignment i would have a shop do.
not to sound like a dic there may be a problem with the kit you got IDK and if your not happy with the customer service than that's your right to be unhappy problems with the kit and company aside.if you are dragging the car and doing a 15in conversion it stands to reason you would do some work on your car yourself.don't get me wrong i'm not blaming you.
i have a question for camaro5 members......do alot of you guys that drag and autocross you cars pay other people to do the work and mods?????

Good points.

To answer that last question (my car is a bit of everything, it was a DD, now its a garage car. Still does AutoX here and there and still does 1/4 here and there as well) The answer is, it depends, it depends on the skill level of the install and the tools I have.

11-01-2019, 10:26 PM	#17
Avenging Orange Drives: 2010 Inferno Orange 2SS/RS Join Date: Apr 2010 Location: Clermont, IN Posts: 3,297	I like this post....its exciting. __________________ 2010 Inferno Orange 2SS/RS M6 Black Leather, Sun Roof, OBX Headers, Borla touring axle back, Cold Air Inductions CAI , non synthetic fluids, BMR total bushing upgrade/1" lowering springs, DSE 32mm rear sway bar. GM fe4 shocks/struts/LCA's, AAM 3.91 diff, Vertini RFS1.8 20x9 +30. Conti ExtremeContact Sport 275/35/20. sjm autoprod ABL dash kit. Mike Norris tuned 413/419. Avenging Orange: 43 years of not buying into the Hype........and damn proud of it!! https://youtu.be/9JD9it6SmB8 https://youtu.be/xmelTlEzI34 KICKING CANCERS ASS SINCE 2015!!

11-03-2019, 09:43 AM	#19
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,064	We went from a suspension issue to a photobucket issue, how’d that happen??? __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

11-08-2019, 07:49 PM	#21
lemontwist Drives: 12 2SS/RS L99,11 2SS/RS LS3totaled Join Date: Jun 2019 Location: mooresville nc Posts: 1,048	so i got to ask. don't you think the shop that did the installation should have noticed a possible clearance issue?? i get it not everyone has a place to handle working on a car.i do almost all my own work and i would have installed the kit myself that way i have no one to blame but myself. i may have questioned the amount of clearance while i was doing the job,now the alignment i would have a shop do. not to sound like a dic there may be a problem with the kit you got IDK and if your not happy with the customer service than that's your right to be unhappy problems with the kit and company aside.if you are dragging the car and doing a 15in conversion it stands to reason you would do some work on your car yourself.don't get me wrong i'm not blaming you. i have a question for camaro5 members......do alot of you guys that drag and autocross you cars pay other people to do the work and mods????? Last edited by lemontwist; 11-09-2019 at 03:47 PM.

11-01-2019, 06:14 AM	#15
FasNuf Drives: 2014 Camaro ZL1 Join Date: Jul 2019 Location: Oregon Posts: 1,619 View My Garage	Why are Photobucket pics always blurred? Not to change the subject, just askin'