Speedster's SST Camaro Build Thread [COTW 9/13/10] - Page 94 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

4thGen427CI · 01-12-2011, 12:43 AM

I don't care turbos or what not! I want that intake in my car!! Will probably wake the hell out of this 427 CI!!!

Then this will be me on the road after adding intake then nitrous

PQ · 01-12-2011, 01:10 AM

Holy crap.

Bruce, that's gonna be soooooo cool.

I can't wait to see it. I'm gonna look like Tony Stewart in that armor all commercial. lol

robertway · 01-12-2011, 06:38 AM

Quote:

Originally Posted by speedster

OK, I'll probably get shot for doing this but here is a little sneak preview. No final colors or coatings yet but all assembled minus the billet stuff.

This fits under the firewall by a fraction of an inch.

Rumor has it the guy at Nelson Racing that leaked this picture to Bruce has been "eliminated". A moment of silence for his sacrifice in feeding this thread's insatiable appetite for information.

*radz28* · 01-12-2011, 09:29 AM

Quote:

Originally Posted by speedster

OK, I'll probably get shot for doing this but here is a little sneak preview. No final colors or coatings yet but all assembled minus the billet stuff.

This fits under the firewall by a fraction of an inch.

Quote:

Originally Posted by Dragoneye

The engine gods parteth the clouds and let a light shine down on me from aboveth...and the turbo said:

GET THE HELL OUTTA MY WAY!!

Bleeping-A-RIGHT!!! OMG!!! I think that can be applied to the whole car!

Mr Twisty · 01-12-2011, 10:28 AM

Quote:

Originally Posted by PQ

Holy crap.

Bruce, that's gonna be soooooo cool.

I can't wait to see it. I'm gonna look like Tony Stewart in that armor all commercial. lol

Quote:

Originally Posted by robertway

Rumor has it the guy at Nelson Racing that leaked this picture to Bruce has been "eliminated". A moment of silence for his sacrifice in feeding this thread's insatiable appetite for information.

:(.......................:(

k, that was long enough...

NEXT!

Brianskeet · 01-12-2011, 02:23 PM

The closer it gets the more I want to see it. It is like tigers; just knowing something that powerful and wild exists makes the world a better place for all of us.

speedster · 01-12-2011, 06:22 PM

Thanks a bunch !

Well, I wish I could post something else, but I can't.

Big hint though - It is going in to the studio tomorrow...

robertway · 01-12-2011, 06:32 PM

Poking around the Nelson Racing site it is amazing what some of those engines look like;

Mr Twisty · 01-12-2011, 07:34 PM

Quote:

Originally Posted by speedster

Thanks a bunch !

Well, I wish I could post something else, but I can't.

Big hint though - It is going in to the studio tomorrow...

Brianskeet · 01-12-2011, 07:56 PM

Quote:

Originally Posted by robertway

Poking around the Nelson Racing site it is amazing what some of those engines look like;

That is just steel candy

speedster · 01-12-2011, 08:06 PM

Quote:

Originally Posted by 4thGen427CI

I don't care turbos or what not! I want that intake in my car!! Will probably wake the hell out of this 427 CI!!! Then this will be me on the road after adding intake then nitrous

Your 427 would really like this kind of intake...

Quote:

Originally Posted by PQ

Holy crap.

Bruce, that's gonna be soooooo cool.

I can't wait to see it. I'm gonna look like Tony Stewart in that armor all commercial. lol

You have your beast already. Bad, Black and Blown !

Quote:

Originally Posted by Brianskeet

The closer it gets the more I want to see it. It is like tigers; just knowing something that powerful and wild exists makes the world a better place for all of us.

Ha, ha... Well it will be better than the present power level of zero...

Quote:

Originally Posted by MisterCamaro69

Call me crazy, but I like that intake better.

It kinda grows on ya.

Quote:

Originally Posted by robertway

Poking around the Nelson Racing site it is amazing what some of those engines look like

Agreed. There are some wild looking combinations there.

GEEo · 01-12-2011, 08:48 PM

Quote:

Originally Posted by robertway

Poking around the Nelson Racing site it is amazing what some of those engines look like;

Is this the engine they put on the GT500 project they did???

Dangeruss · 01-12-2011, 09:08 PM

Quote:

Originally Posted by speedster

Thanks a bunch !

Well, I wish I could post something else, but I can't.

Big hint though - It is going in to the studio tomorrow...

OK guys. I found out where the studio is, and I'm leaving Houston right now and heading that way. I'll post up spy pics as soon as I have them!

speedster · 01-12-2011, 09:09 PM

Quote:

Originally Posted by GEEo

Is this the engine they put on the GT500 project they did???

Here is the engine for the Shelby "Code Red" project. Sorry, but the pic was snapped at the shop a while back from my ancient cell phone.

With different top end parts it looks much prettier now...but it's still a FORD.

01-12-2011, 12:43 AM	#1303
4thGen427CI 5th Gen Drives: 10 SS Join Date: Jul 2010 Location: Denver,Colorado Posts: 426	Engine!! I don't care turbos or what not! I want that intake in my car!! Will probably wake the hell out of this 427 CI!!! Then this will be me on the road after adding intake then nitrous

01-12-2011, 01:10 AM	#1304
PQ Booooosted. Drives: 2010 Supercharged SS Join Date: Apr 2008 Location: Mobile, AL Posts: 36,716 View My Garage	Holy crap. Bruce, that's gonna be soooooo cool. I can't wait to see it. I'm gonna look like Tony Stewart in that armor all commercial. lol __________________

01-12-2011, 02:23 PM	#1308
Brianskeet Brianskeet Drives: RJTC 1SS RS L99 Join Date: Sep 2010 Location: Crestview FL Posts: 771 View My Garage	The closer it gets the more I want to see it. It is like tigers; just knowing something that powerful and wild exists makes the world a better place for all of us. __________________ ARH 1 7/8 coated LT, High flows, Corsa L99 exhaust, Vmax CNC throttle body, Elite Engineering catch can and tunnel brace, C.A.I. Apex Washer relocation and scoop, Janetty Tune, MSD wires, DEI heat shields, RB rotors and pads, Mike the powder coater calipers, pedders lines, Forgestar F14's, Gorilla nutz, MTI spoiler finished by Gary, Gary's Customz Bow Ties, Side Markers and Tails tinted, Bezels matte black, Badges deleted, Windows Tinted, AAC DRL P13W lights, AAC tinted LED reverse lights, AAC LED interior lights, RPI match painted DRL Bezels, Lis plate frame, Lloyds mats

01-12-2011, 06:22 PM	#1309
speedster SST... Drives: SST Camaro 2010 Join Date: Oct 2008 Location: East Coast of Florida Posts: 5,927 View My Garage	Thanks a bunch ! Well, I wish I could post something else, but I can't. Big hint though - It is going in to the studio tomorrow... __________________

01-12-2011, 06:32 PM	#1310
robertway Drives: 2012 Challenger SRT8 Auto Join Date: Sep 2009 Location: Central New Jersey Posts: 839	Poking around the Nelson Racing site it is amazing what some of those engines look like; __________________ "When the people find they can vote themselves money, that will herald the end of the republic." - Benjamin Franklin LS3 Camshaft Swap Do-It-Yourself Instructions - 2010 LS3 gone but not forgotten!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PEDDERS SUCCESSFULLY FITS 305s ON ALL 4 CORNERS!	Info@PeddersUSA.com	Suspension / Brakes / Chassis	467	06-11-2013 09:45 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM
Detroit News panel wants GM to build Camaro concept	Tran	5th Gen Camaro SS LS LT General Discussions	12	03-15-2009 04:38 PM