Rockford Fosgate P300-10 turns on but doesn't play music - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

er0senn1n · 08-15-2013, 09:19 PM

Got it installed today, it turns on ( a blue light turns on when I turn the car on) but when I put the volume up on the music it doesn't do anything. It just stays on. Anyone have any suggestions to what might be wrong?

I can take pictures if needed

Caddyroger · 08-15-2013, 09:32 PM

Quote:

Originally Posted by er0senn1n

Got it installed today, it turns on ( a blue light turns on when I turn the car on) but when I put the volume up on the music it doesn't do anything. It just stays on. Anyone have any suggestions to what might be wrong?

I can take pictures if needed

Double check your wiring.

er0senn1n · 08-15-2013, 09:35 PM

Quote:

Originally Posted by Caddyroger

Double check your wiring.

Double checked everything. Everything seems to be right

Glen e · 08-15-2013, 09:47 PM

How is the sub getting music signal?

Tapping back speakers?

yzark99 · 08-15-2013, 09:50 PM

How are you getting the audio signal into the amp? Is the amp gain set high enough? Blown speaker?

er0senn1n · 08-15-2013, 10:20 PM

Quote:

Originally Posted by Glen e

How is the sub getting music signal?

Tapping back speakers?

Not sure, I do have blown off rear speaker. Does that have anything to do with it? I am using that device that has 2 wires to connect to the stock radio. I didn't connect it, a friend did.

Glen e · 08-15-2013, 10:22 PM

Quote:

Originally Posted by er0senn1n

Not sure, I do have blown off rear speaker. Does that have anything to do with it? I am using that device that has 2 wires to connect to the stock radio. I didn't connect it, a friend did.

Respectfully, you are in over your head, take it to a car audio place and give them an hours labor....

yzark99 · 08-17-2013, 10:55 AM

^ What he said. It sounds like your friend wired the signal input wrong, or the gain is too low, or the device is a cheap POS. I run an amp+sub from these rear wires through a Navone LOC without a problem.

08-15-2013, 09:19 PM	#1
er0senn1n Drives: 2010 Camaro V6 Join Date: Mar 2013 Location: Irving, Texas Posts: 70	Rockford Fosgate P300-10 turns on but doesn't play music Got it installed today, it turns on ( a blue light turns on when I turn the car on) but when I put the volume up on the music it doesn't do anything. It just stays on. Anyone have any suggestions to what might be wrong? I can take pictures if needed

08-15-2013, 09:47 PM	#4
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	How is the sub getting music signal? Tapping back speakers? __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant

08-15-2013, 09:50 PM	#5
yzark99 I run 2 catch cans... Drives: 2012 1LT SIM Auto Join Date: Oct 2011 Location: OR there Posts: 1,038 View My Garage	How are you getting the audio signal into the amp? Is the amp gain set high enough? Blown speaker? __________________ Overkill tuned • Air Scoop • CAI • VMAX PTB • JacFab Laminator FX + Extendolator • SOLO Hi-Flo Cats + Cat-Back Exhaust View my top 3 LFX performance mods and more: .

08-17-2013, 10:55 AM	#8
yzark99 I run 2 catch cans... Drives: 2012 1LT SIM Auto Join Date: Oct 2011 Location: OR there Posts: 1,038 View My Garage	^ What he said. It sounds like your friend wired the signal input wrong, or the gain is too low, or the device is a cheap POS. I run an amp+sub from these rear wires through a Navone LOC without a problem. __________________ Overkill tuned • Air Scoop • CAI • VMAX PTB • JacFab Laminator FX + Extendolator • SOLO Hi-Flo Cats + Cat-Back Exhaust View my top 3 LFX performance mods and more: .