Who can port a SS manifold?

[Merc]

Originally Posted by Rhino79

There is work to do other than just porting and removing material. That's where the gains are. I agree just removing material, and generic porting will not yield gains. It didn't on my car. But when I researched some more, I found some good info on things to try, and they did help, to my surprise....lol. I have done it on about 3-4 cars now and all have shown similar gains. Porting the ports does nothing, opening the throat up does nothing, cutting the stands out does nothing. Actually I will say that without touching any of those areas, I can get 5-10 tq and about that much power too!

Any chance you would help me with this project.

[drayco513]

rhino , if ur up to it soon , i may send a intake out and let u port it and see what ur show. its hard to find those gains for the price of the hp u gain.

[Rhino79]

I can do it for you guys do sho. Be good to see an independent test.

[Merc]

Originally Posted by Rhino79

I can do it for you guys do sho. Be good to see an independent test.

Very cool. Thx. I just sent a PM to the member who is selling off his take off SS manifold. Just have to firm up shipping fee and method of payment.

THX Again

[SC2150]

What Rhino is seeing is right along the lines of what we see as well. Some moght hit 18 or so, but figure 15 on average. You can easily ruin these as well since the composite is "sonic welded" together so if you try and take to much out you cause leakage between the runners and it results in less power than stock...and we see tons ruin them.

There is definately plenty of area to work on.

[striker1703]

I had my manifold ported along with a cam installed at CPR . I took the leap of faith.

http://www.camaro5.com/forums/showthread.php?t=264653


questions contact 480-359-5914, email: joe@cordesperformanceracing.com or pm

[drayco513]

so is there a claim like all other ported stuff with these intakes. if ur not happy send it back type stuff. cause i would like to try it out and will get 3rd party testing done aswell. but i dont want to be out of 2-3 hundred and gain 1 rwhp.

[drayco513]

seen alot of reviews on sc2150 stuff and ive yet to see 3rd party test showing anything close to 10rwhp on it much less 15 on a ls3 intake. ive seen alot of no gains and minimal gains there is accually a thread in the sponsors section .

[Merc]

Originally Posted by Rhino79

I can do it for you guys do sho. Be good to see an independent test.

I have a second manifold to play with now. Like to talk to you about it for sure. Could give you a call on my dime.

[Camarojt]

Merc I'm getting mine done as we speak right now so I will be able to somewhat tell the gains on this. I'm also doing a few other things so it won't just be intake gains but should be interesting nevertheless.

[Merc]

Originally Posted by Camarojt

Merc I'm getting mine done as we speak right now so I will be able to somewhat tell the gains on this. I'm also doing a few other things so it won't just be intake gains but should be interesting nevertheless.

Cool! Who's doing it?

[Camarojt]

Rhino modified and ADM is installing it.

[Merc]

Originally Posted by Camarojt

Rhino modified and ADM is installing it.

Can you put in a good word for me? I have a manifold ready to send him.

[Pro Stock John]

I had a stock intake worked on for me, and it's about to be sent back to me. I'll keep folks posted but I'm not going to post any info until it's on and the car is re-tuned.