02-06-2014, 03:41 PM | #1 |
Drives: 1991 camaro rs, 2010 2ss 6M Join Date: Jan 2013
Location: Stevensville, MD
Posts: 15
|
Exhaust vibrating
Hey guys, I have a 2010 2ss camaro m6 and I am hearing a very loud vibrating sound coming from in or around the exhaust. I have installed an x pipe, and an slp muffler delete kit and that's it. Any idea what this vibration could be? I hear it letting the clutch out in 1st and then 2500-3500 rpms in every gear. I think the exhaust could be lose or the heat shield is hitting it. Help!
|
02-06-2014, 04:19 PM | #2 |
Drives: 2011 Camaro 2ss Join Date: May 2013
Location: nj
Posts: 1,559
|
Similar thing happened to me after getting HF cats installed, guys on here said it was the tunnel brace, and that's exactly what it turned out to be. Could be a loose clamp or something too...
|
02-06-2014, 04:23 PM | #3 |
Drives: 1991 camaro rs, 2010 2ss 6M Join Date: Jan 2013
Location: Stevensville, MD
Posts: 15
|
|
02-06-2014, 04:31 PM | #4 |
Drives: 2011 Camaro 2ss Join Date: May 2013
Location: nj
Posts: 1,559
|
With mine they just loosened it, moved it back a little so it wasn't touching the exhaust then tightened it back up.
|
02-06-2014, 04:33 PM | #5 |
Drives: 1991 camaro rs, 2010 2ss 6M Join Date: Jan 2013
Location: Stevensville, MD
Posts: 15
|
|
02-06-2014, 04:48 PM | #6 |
Scott's45
Drives: 2012 2SS 45th Anniversary Join Date: Mar 2012
Location: New Hampshire
Posts: 557
|
Or, you can take the bolts out of the tunnel brace and put in washers to get it away from the pipes. Hope you figure it out, good luck.
__________________
2012 2SS 45th Anniversary, Hurst short throw shifter, Stainless Power LT headers, high flow cats, SW Retro Chambered 3" cat back, CAI, Heritage grill, tinted windows, red/silver hash stripes, AAC LED sidemarkers, blacked out turn signals/tail lights, splash guards. 402RWHP
|
02-06-2014, 04:49 PM | #7 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
Yep, most likely the tunnel brace. I would take it back to whoever installed your X pipe and have them fix it.
Best regards, Tyler 888-308-6007 |
02-08-2014, 10:39 PM | #8 |
Had borla s type installed and had the same thing. I installed the hotchkis chasis brace and found the tunnel brace was rubbing on the exhaust. About a 16th away from it. Drove me nuts
|
|
|
|
Tags |
exhaust |
|
|