sjm autoprod - Concept Afterburner Tail Lights - Page 62 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

DarkneSS · 07-12-2013, 02:45 PM

sjmautoprod · 07-15-2013, 01:43 PM

Well, that was a fun few days.

Now that we're back, here's an update.

Several invoices were sent out to get the basic, no-frills versions out the door so that we can focus on making dark diffusers and finishing up flicker and sequential. Once we get the art for both circuit boards done, they will only take a few days to manufacture, then, another few days for assembly.

No matter where you are on the list, if you did not get any options, check your email!

sjmautoprod · 07-17-2013, 10:48 PM

The babies are starting to leave the nest!

The flicker boards have been finalized and ordered, and, the parts orders should be finished up tomorrow. We finally found the final sequential parts and those are also on order.

agkelly73 · 07-18-2013, 07:03 PM

Quote:

Originally Posted by sjmautoprod

The babies are starting to leave the nest!

The flicker boards have been finalized and ordered, and, the parts orders should be finished up tomorrow. We finally found the final sequential parts and those are also on order.

Awesome!!!!

Sent from my DROID RAZR HD using Tapatalk 2

sjmautoprod · 07-18-2013, 07:23 PM

The list in the first post has been updated. Had one person back out previously and one recently that needed to drop out.

Note that we have started shipping the kits that selected no options. Option kits come next!

DarkneSS · 07-19-2013, 08:43 AM

Mine comes tomorrow

wasting no time putting them on!

Jbcamaro · 07-19-2013, 03:32 PM

yay

DarkneSS · 07-20-2013, 10:25 AM

Confirmed out for delivery, studied the install instructions. If I can find a quickish sealing silicone sealant, and assuming there are no problems with my kit, this will be installed by dinner time at the latest.

SUPER EXCITED! 3 years + and today is finally the day!

sjmautoprod · 07-20-2013, 10:35 AM

I think all silicone is 24-hour cure. :(

I'm here if you need me!

DarkneSS · 07-20-2013, 01:55 PM

Quote:

Originally Posted by sjmautoprod

I think all silicone is 24-hour cure. :(

I'm here if you need me!

Home depot has some!

http://www.homedepot.com/p/DAP-ALEX-...1#.UerdAG2j0eI

sjmautoprod · 07-20-2013, 05:34 PM

Careful. That stuff is white.

DarkneSS · 07-20-2013, 07:17 PM

Quote:

Originally Posted by sjmautoprod

Careful. That stuff is white.

Wait it has to be clear? lol....the oem stuff is black!

Got 3 lenses off, then my drill died. Getting the lenses off is not easy in the slightest imo...

Removing the actual tails was cake.

No one else got theirs? Im gone be FIRST

sjmautoprod · 07-20-2013, 07:23 PM

I'm just saying that the white will show more than clear.

What did you have chucked up in the drill to get the lenses off?

There were a couple of the initial shipments that were recalled to add options to, and, some people did not respond to emails about paying the balance before shipment.

More basic kits shipping Monday!

DarkneSS · 07-20-2013, 08:26 PM

Quote:

Originally Posted by sjmautoprod

I'm just saying that the white will show more than clear.

What did you have chucked up in the drill to get the lenses off?

There were a couple of the initial shipments that were recalled to add options to, and, some people did not respond to emails about paying the balance before shipment.

More basic kits shipping Monday!

Oh okay, I'll just be careful with it. I didn't actually buy that silicone either, some 3M one but we'll see.

I'm using a dremel drill bit from Home Depot, its kind of small but it gets the job done.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AAC afterburner tail lights	Berryp	Cosmetics and Lighting Modification Discussions	28	01-28-2012 04:18 PM
AAC's Afterburner Tail Lights	The Stig	Cosmetics and Lighting Modification Discussions	32	05-17-2011 02:42 PM
AAC Afterburner Tail Lights! PICS!	TXGooch21	Cosmetics and Lighting Modification Discussions	23	10-20-2010 09:47 AM
New tail lights?	2000v6	4th Generation Camaros	40	03-17-2010 03:07 AM

07-12-2013, 02:45 PM	#855
DarkneSS Account Suspended Drives: 2010 Camaro 2SS/RS 6MT Join Date: Apr 2010 Location: Westchester, New York Posts: 3,715

07-15-2013, 01:43 PM	#856
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	Well, that was a fun few days. Now that we're back, here's an update. Several invoices were sent out to get the basic, no-frills versions out the door so that we can focus on making dark diffusers and finishing up flicker and sequential. Once we get the art for both circuit boards done, they will only take a few days to manufacture, then, another few days for assembly. No matter where you are on the list, if you did not get any options, check your email!

07-17-2013, 10:48 PM	#857
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	The babies are starting to leave the nest! The flicker boards have been finalized and ordered, and, the parts orders should be finished up tomorrow. We finally found the final sequential parts and those are also on order.

07-18-2013, 07:23 PM	#859
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	The list in the first post has been updated. Had one person back out previously and one recently that needed to drop out. Note that we have started shipping the kits that selected no options. Option kits come next!

07-19-2013, 08:43 AM	#860
DarkneSS Account Suspended Drives: 2010 Camaro 2SS/RS 6MT Join Date: Apr 2010 Location: Westchester, New York Posts: 3,715	Mine comes tomorrow wasting no time putting them on!

07-19-2013, 03:32 PM	#861
Jbcamaro Drives: 2010 camaro Join Date: May 2010 Location: golden,ms Posts: 174	yay

07-20-2013, 10:25 AM	#862
DarkneSS Account Suspended Drives: 2010 Camaro 2SS/RS 6MT Join Date: Apr 2010 Location: Westchester, New York Posts: 3,715	Confirmed out for delivery, studied the install instructions. If I can find a quickish sealing silicone sealant, and assuming there are no problems with my kit, this will be installed by dinner time at the latest. SUPER EXCITED! 3 years + and today is finally the day!

07-20-2013, 10:35 AM	#863
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	I think all silicone is 24-hour cure. :( I'm here if you need me!

07-20-2013, 05:34 PM	#865
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	Careful. That stuff is white.

07-20-2013, 07:23 PM	#867
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	I'm just saying that the white will show more than clear. What did you have chucked up in the drill to get the lenses off? There were a couple of the initial shipments that were recalled to add options to, and, some people did not respond to emails about paying the balance before shipment. More basic kits shipping Monday!