|
View Poll Results: T Tops or Carbon Fiber? | |||
T Tops | 14 | 73.68% | |
Carbon Fiber Conversion (Fenders, doors, etc) | 5 | 26.32% | |
Voters: 19. You may not vote on this poll |
|
Thread Tools |
08-09-2011, 04:30 PM | #337 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
bought myself a foam gun for my birthday (http://www.amazon.com/Gilmour-Foamas...2918754&sr=1-4)
I'll TRY and act surprised when it shows up at my door tomorrow.
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
08-09-2011, 04:48 PM | #338 | |
Boosted Moderator
|
Quote:
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
|
08-10-2011, 05:03 PM | #339 | |
Drives: 2010 CGM SS/RS COTW 7/5/2010 Join Date: Oct 2008
Location: Salinas, ca
Posts: 1,817
|
Quote:
|
|
08-10-2011, 05:04 PM | #340 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
you can get me back with that trunk.
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
08-10-2011, 05:26 PM | #341 |
Drives: 2010 CGM SS/RS COTW 7/5/2010 Join Date: Oct 2008
Location: Salinas, ca
Posts: 1,817
|
lol no time theyre painting mine as we speak. just doing grey and wih the blue pin and a bunch of clear should be ready by sat. and monday my hood arrives and were just gonna clear it im leaving it carbon fiber so theyre gonna be busy lol
|
08-11-2011, 10:34 AM | #342 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
I was planning on pulling off my carbon fiber stuff when my car goes in the shop; so your cousin said he can sand it down to take the clouding out and reclear it?
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
08-19-2011, 06:41 PM | #343 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Ordered a rear seat delete online today; should be here sometime next week.
on a side note; lost oil pressure AGAIN.....not sure what the issue is, but probably gunna get it towed to the shop early next week. gunna add door supports to the roll cage shortly as well as get that rear seat delete kit installed. I'm seriously considering installing a fire system in my car; will have more specifics next week. its friday!
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
08-31-2011, 01:13 PM | #344 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
IPS should receive the turbos in the next day or two and will ship out my kit. I also decided to order this boost controller:
I decided to go with this over the turbosmart2 because I plan on getting dual plx gauges installed on my a-pillar.
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
08-31-2011, 07:13 PM | #345 |
Drives: Heel toe express.. Join Date: Dec 2009
Location: North Charleston, S.C
Posts: 1,500
|
Did you ever get those CF mirrors installed?
__________________
Camaro SOLD :(
|
08-31-2011, 07:21 PM | #346 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Yup! Thx, got a ton of comments on how great they look!
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
09-02-2011, 10:20 AM | #347 |
Drives: Heel toe express.. Join Date: Dec 2009
Location: North Charleston, S.C
Posts: 1,500
|
Awesome.. Where are the pics lol
__________________
Camaro SOLD :(
|
09-07-2011, 02:13 PM | #348 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
cant find any; feels like the car has been in the shop forever! 3 weeks as of today
just got off the phone with ips and the 86 turbos are on backorder and still couldnt get a solid date of when they could be shipped.....so i decided to go with the 82 turbos. the kit is getting shipped out tomorrow morning so by next wed my car will be ready to tear apart!! 1 week and counting......
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
09-30-2011, 09:47 PM | #349 | |
Black on Black on Black
|
Quote:
__________________
|
|
09-30-2011, 11:01 PM | #350 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
nice, are u going to b at the car show on sunday? met u 2 weeks ago at boston market but didnt get a chance to check out ur ride
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
|
|
Tags |
carbon fiber intake, goldrush rally 4, the neighbor hater, tron camaro, twin turbo |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
3rd Gen Camaro Street Stock build thread (dialup beware) | zlathim | 3rd Generation Camaros | 9 | 12-06-2018 10:30 AM |
Tom Henry Racing THR22 2010/LS3/IBM/Supercharged SS Camaro [COTW 10/29/12] | GTAHVIT | Member Car Journals | 5217 | 06-27-2016 08:14 AM |
Do you want the Z28? | ChrisB | Camaro ZL1 Forum - ZL1 Specific Topics | 1616 | 09-04-2010 11:49 PM |
Anyone in St. Louis want a black SS March build Camaro | Sean_W | Camaro Price | Ordering | Tracking | Dealers Discussions | 11 | 03-08-2009 01:31 PM |