09-07-2013, 10:42 AM | #1 |
Drives: 2012 ZL 1 #370 Join Date: Dec 2010
Location: Switzerland
Posts: 351
|
Noise underground, diff
Hi guys
Sorry for the bad videos, but the impotant is the sound of the videos. This vids i took one month ago. I think its the diff, the car was two weeks by the dealer, because of this problem. He changed the diff fluid and was looking other possibilitys. Next week the car goes oncevagain to the dealer. But my question on you, somebody have an idea what this is, it comes from rear. Its not the brakes for sure. Please take the time and listen it on my videos. Thanks http://youtu.be/un5e6WoDdbk http://youtu.be/gy6asZvOURs I here it always louder. Last edited by jsd; 09-07-2013 at 12:50 PM. |
09-07-2013, 04:34 PM | #2 |
Account Suspended
Drives: 2012 Camaro ZL1 #1265 Join Date: Jan 2009
Location: McHenry, IL
Posts: 595
|
That would drive me NUTS!!!
Its sounds too slow to be rotational. (driveline) Does it change when applying the clutch? |
09-07-2013, 04:50 PM | #3 |
Drives: 2013 ZL1. Black on Black on Black Join Date: Aug 2013
Location: Madison, MS
Posts: 68
|
Dang...That would drive me insane for sure. Im with **********..it sounds too slow to me to be drivetrain related. However, it does get faster and slower (at least what I heard) as you slow down the car or speed up the car. My wife's Mercedes E350 had a similar noise but more whining. Ended up being the tranny and they replaced it under warranty. I would definitely take it to dealer and tell them to keep it til its fixed or you have a new one. Good luck
|
09-08-2013, 02:09 AM | #4 |
Drives: 2012 ZL 1 #370 Join Date: Dec 2010
Location: Switzerland
Posts: 351
|
Thanks
The noise dont change when i push the clutch. When the car is cold, the first 2 or 3 miles i never hear it. The noise change his intensity between 1 - 55 km/h. After 60 i dont hear it. I bring the car to the dealer. The last time i receive my car with a big scratch in my rim. But he says, its not doing by him. |
09-08-2013, 07:06 AM | #5 |
Drives: 2014 ZL1m6 red hot #569 Join Date: Dec 2009
Location: florida
Posts: 2,422
|
almost sounds like a wheel bearing that's low on grease
|
09-08-2013, 11:26 AM | #6 |
Drives: 13 ZL1 SIM, 99 Z28 Black Join Date: Feb 2013
Location: Spokane, WA
Posts: 708
|
The rim is probably from going through the car wash.
__________________
2018 C7 Z06 - WGG, M7. / 2013 ZL1 - SIM, 6 spd, RotoFab CAI, Can. / 1999 Z28 - Black, 6 spd, K&N, Subframe. / More Fun Stuff - www.inlandspeed.com
|
09-08-2013, 11:47 AM | #7 |
Drives: 2012 ZL 1 #370 Join Date: Dec 2010
Location: Switzerland
Posts: 351
|
I wash my car withnmy hands, my z never see some carwash
|
09-09-2013, 01:39 PM | #8 |
Drives: 2012 ZL 1 #370 Join Date: Dec 2010
Location: Switzerland
Posts: 351
|
Unbelieveble, i was make a little tour before, the noise is going.
We have a temperature of 16 celsius before. The vids i make on some hot summerday. What you guys think. Is this possible, something then react like his with more heat. I dont understand, my car drives me crazy Who the diffcool system works |
09-12-2013, 09:41 AM | #9 |
Drives: 13' M6 ZL1 GCC specs Join Date: Aug 2013
Location: Qatar
Posts: 25
|
Let them check your rear bushings, I had somthing similar and the dealer solve it
__________________
|
09-12-2013, 02:07 PM | #10 |
Drives: 2016 Corvette Z06 Blade Silver Join Date: Jun 2009
Location: Florida
Posts: 822
|
Get with GM. I had a dealer door ding my car. They attempted to blame me. I provided feedback to GM. Like magic the dealer called and fix the damage.
__________________
2016 2LZ Z06 Blade Silver
2013 ZL1 BLACK on BLACK <SOLD> Roto-Fab CAI 2010 2SS/RS BLACK on BLACK <SOLD> 3" MBRP 304 Stainless Exhaust Roto-Fab CAI |
09-13-2013, 06:46 AM | #11 |
Drives: 2012 ZL 1 #370 Join Date: Dec 2010
Location: Switzerland
Posts: 351
|
Thanks a lot for your inputs
I am in switzerland, gm is not interessed to help me with my car, chevrolet switzerland also. My dealer has no problems to do something, but its not so easy to find this problem Which are the rear bushings? Sorry for the question, but i am not sure which you mean. |
10-20-2013, 08:53 PM | #12 |
Drives: 2013 Camaro ZL1 Join Date: Dec 2012
Location: Dallas, Texas
Posts: 2,155
|
Bump this up for discussion?
I have the same noise! Starting to bug me. To my ears as joes 407 stated it sounds like wheel bearing as is doesn't change pitch. The other thing is my car is lowered with Pedders and the "bushings were replaced. Isn't a bushing noise different than this? This sounds rotational? I guess I'm off to the dealer tomorrow with mine.
|
10-20-2013, 10:46 PM | #13 |
Drives: 2012 ZL 1 #370 Join Date: Dec 2010
Location: Switzerland
Posts: 351
|
@Zl1-V
Please let me know, when you solved the problem. My car is not done. I hope my mechanic solve this in this year.:frusty |
10-21-2013, 12:17 PM | #14 |
Drives: 2013 Camaro ZL1 Join Date: Dec 2012
Location: Dallas, Texas
Posts: 2,155
|
|
|
|
|
|