Big Worm Graphics - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ALacorte515 · 03-31-2013, 12:05 PM

I'm looking into getting the side marker tints, reverse lights, and gills.

What do you guys think of the product? Is it worth it?

and Is it easy to install?

Thanks for the input

SoooFlyyy · 03-31-2013, 01:06 PM

I got the gills and the bowties. The bowties weren't too hard to do but the gills take a little more patience. Messed up one and got great customer service from them, I highly recommend them.

rdblan2 · 03-31-2013, 01:39 PM

Happy Big Worm customer here. I have everything you wanted and have been very pleased. I've had them all for well over a year if my memory is correct.

redhotcandy · 03-31-2013, 01:45 PM

Got my trunk black out as well as tint for tail lights and side markers. Everything has held up very well. Easy to install. I did have an issue with the first set of tail light vinyls, they didn't fit right. They actually had me peel them off, and send them back so they could see that the fit was way off. That was a pain to do, but they sent me another kit where you have to take the bezels off and they fit better. So, just in case they haven't corrected that, just be advised. All in all, good products.

DFWHD · 03-31-2013, 04:00 PM

I've got the gills and they do take a bit of time. I'm fortunate that Big Worm is only about 45 minutes from my house. They're great guys and very helpful.

Jason RS · 03-31-2013, 07:07 PM

Ordered my gills from ebay. Only $12. Hope they hold up. If not i will order them from big worm.

TSSUNAMI · 03-31-2013, 07:40 PM

I have one of their stripe kits and the quality and packaging was great, as was the customer service. I highly recommend them. Class act vendor.

Denis · 03-31-2013, 08:42 PM

Got my hash marks from them. Very easy to do

ALacorte515 · 03-31-2013, 09:22 PM

any tips on doing the gills and side markers?

Aubrey64 · 03-31-2013, 09:58 PM

I don't know much about the tint and reverse lights, but i got my hash marks, gill stripes, and racing stripes from Big Worm and I would highly recommend them! They are very hi quality and they are an awesome company to deal with

iLLmaTic3s · 03-31-2013, 11:22 PM

great stuff by them.

03-31-2013, 12:05 PM	#1
ALacorte515 Drives: 2016 2LT Vert Join Date: Sep 2012 Location: Long Island, NY Posts: 141	Big Worm Graphics I'm looking into getting the side marker tints, reverse lights, and gills. What do you guys think of the product? Is it worth it? and Is it easy to install? Thanks for the input

03-31-2013, 01:39 PM	#3
rdblan2 Drives: 2SS RS Join Date: Mar 2010 Location: MD Posts: 1,272	Happy Big Worm customer here. I have everything you wanted and have been very pleased. I've had them all for well over a year if my memory is correct. __________________ Livernois 2C cam and tune, LS3 conversion, Roto-Fab intake, Kooks headers, DSS driveshaft and axles, BMR suspension parts, VMax ported throttle body, Whipple blower. (623hp).

03-31-2013, 07:40 PM	#7
TSSUNAMI It was ninety nine cents! Drives: 2014 Jeep Wrangler Join Date: Jun 2010 Location: Syracuse, NY Posts: 1,715 View My Garage	I have one of their stripe kits and the quality and packaging was great, as was the customer service. I highly recommend them. Class act vendor. __________________ My Build Thread

03-31-2013, 08:42 PM	#8
Denis Drives: 2010 SS Join Date: May 2012 Location: Yorktown Heights, NY Posts: 7,695 View My Garage	Got my hash marks from them. Very easy to do __________________

03-31-2013, 09:58 PM	#10
Aubrey64 Drives: 2010 Camaro LLT/RS Join Date: Apr 2012 Location: Plano, TX Posts: 2,685	I don't know much about the tint and reverse lights, but i got my hash marks, gill stripes, and racing stripes from Big Worm and I would highly recommend them! They are very hi quality and they are an awesome company to deal with __________________

03-31-2013, 01:06 PM	#2
SoooFlyyy Drives: 2012 IBM 1LT/RS w/ SIM Rallies Join Date: Dec 2011 Location: Charleston, SC Posts: 95 View My Garage	I got the gills and the bowties. The bowties weren't too hard to do but the gills take a little more patience. Messed up one and got great customer service from them, I highly recommend them.

03-31-2013, 01:45 PM	#4
redhotcandy Drives: 2012 2SS/RS Join Date: Jul 2011 Location: The Great Plains Posts: 568 View My Garage	Got my trunk black out as well as tint for tail lights and side markers. Everything has held up very well. Easy to install. I did have an issue with the first set of tail light vinyls, they didn't fit right. They actually had me peel them off, and send them back so they could see that the fit was way off. That was a pain to do, but they sent me another kit where you have to take the bezels off and they fit better. So, just in case they haven't corrected that, just be advised. All in all, good products.

03-31-2013, 04:00 PM	#5
DFWHD Drives: 45th Anniversary Convertible Join Date: Jun 2012 Location: North Texas Posts: 348 View My Garage	I've got the gills and they do take a bit of time. I'm fortunate that Big Worm is only about 45 minutes from my house. They're great guys and very helpful.

03-31-2013, 07:07 PM	#6
Jason RS 2011 Summit White V6 RS Drives: 2011 Summit White V6 RS MRT 1.0 Join Date: Jun 2012 Location: Cincinnati Posts: 253	Ordered my gills from ebay. Only $12. Hope they hold up. If not i will order them from big worm.

03-31-2013, 09:22 PM	#9
ALacorte515 Drives: 2016 2LT Vert Join Date: Sep 2012 Location: Long Island, NY Posts: 141	any tips on doing the gills and side markers?

03-31-2013, 11:22 PM	#11
iLLmaTic3s Drives: 2010 Camaro Join Date: Apr 2010 Location: New York Posts: 277	great stuff by them.