How do I program a KEYLESS FOB??

[Luke77515]

I have a 2010 Camaro SS and I had to replace my FOB, which was the only one that I had. My keys are separated from it due to the factory recall. is there anyway I can program this keyless FOB myself? Or does that HAVE to be done at the dealership?

[Ryan2ss]

I would like to know how to do this as well, I had went to the dealer and they looked at me like I had 2 heads. is there a way to do it like older Chevy unlock fobs ware you hold the lock and unlock at the same time?

[Angrybird 12]

If you have a working fob you can program the new one yourself.
Put the original in and start the car. Wait about 5 seconds, turn it back off and immediately put the new one in and start it. I think you will get a message on the DIC should say fob programmed or something similar.
If you don't have a working fob the dealer will need to program it.

[Ryan2ss]

the problem is the key is not attached to the fob "because of gm recall" if u don't understand the recall separates the fob from the key. there should be a way to do it with out going to the dealer

[Angrybird 12]

Originally Posted by Ryan2ss

the problem is the key is not attached to the fob "because of gm recall" if u don't understand the recall separates the fob from the key. there should be a way to do it with out going to the dealer

Just figured it is still close enough to the lock cylinder that it would work, but I don't know.