You are browsing camaro5 
 |
|
12-20-2013, 11:39 AM
|
#1 |
 Drives: 2010 2 SS Join Date: Oct 2013
Location: Georgia
Posts: 594
|
what struts to use with the BMR 1.4/1" drop
I'm thinking the stock SS ones wont work. I want to drop my car so I'm torn betewwn the 1" springs with stock struts or going lower and replacing them.
|
|
|
|
12-20-2013, 12:23 PM
|
#2 |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
The stock ones are fine but if you did want to upgrade the only one that is really available are Koni.
|
|
|
|
|
12-20-2013, 12:34 PM
|
#3 |
|
Drives: 2010 2 SS Join Date: Oct 2013
Location: Georgia
Posts: 594
|
they work fine with both the 1.4/1" and 1" drop?
|
|
|
|
|
12-20-2013, 12:59 PM
|
#4 |
|
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
Yes.
|
|
|
|
|
12-20-2013, 01:07 PM
|
#5 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
How many miles do you have on your car? Being that you have a 2010, depending on your mileage it may not be a bad idea to replace them with some new SS or 1LE struts. If you are at or close to 50k I'd suggest doing the struts along with the springs.
Feel free to call, PM or email me anytime with questions. Best regards, Tyler 888-308-6007 |
|
|
|
|
12-20-2013, 01:18 PM
|
#6 |
|
Drives: 2010 2 SS Join Date: Oct 2013
Location: Georgia
Posts: 594
|
28, 000 miles
|
|
|
|
|
12-20-2013, 04:14 PM
|
#7 |
|
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
Okay, that's not too bad. I'd go ahead and install them on the stock struts and call it a day.
Best regards, Tyler 888-308-6007 |
|
|
|
|
12-20-2013, 05:19 PM
|
#8 |
|
Drives: 2010 2 SS Join Date: Oct 2013
Location: Georgia
Posts: 594
|
The car is a garage queen, watch the weather report kind of car. Itll probably have 28K on it next year too.
|
|
|
|
|
|
|
|
 |
|
|
