The 2010 Camaro V6 HP offically is.....

[Muscle Master]

Originally Posted by CamaroSpike23

well, I dont know off hand what the bore is or the cyl wall thickness either. but if we need 25 additional ci..... without stroking......


it can be done.


bore to the max possible, run deep dished pistons with -25cc quad dishes and shorten the piston height down. you could get the needed ci. without stroking. but you wont be running nearly as high compression as stock.


but then again, why bother with stroking a v-6 for power. esp a DI one like this that would woop ass with a 100 shot o' juice

Lol thats what I'm talking about

[CamaroSpike23]

Originally Posted by Muscle Master

Lol thats what I'm talking about

i havent heard much on DI with nitrous. but I would imagine that as long as the injectors and fuel pump can keep up. DI would be a perfect setup for nitrous. i'll have to do some looking on it....

[Muscle Master]

Originally Posted by CamaroSpike23

i havent heard much on DI with nitrous. but I would imagine that as long as the injectors and fuel pump can keep up. DI would be a perfect setup for nitrous. i'll have to do some looking on it....

Is it possible or doable to have a perfect sync with the injectors... N20 and Fuel

[CamaroSpike23]

Originally Posted by Muscle Master

Is it possible or doable to have a perfect sync with the injectors... N20 and Fuel

yes. its called direct port.

and thats what I was actually thinking of doing. only downside is it would require some dyno tuning running pig rich at first then leaning it back till everything is right.



now if you ran a fogger system in front of the maf, it would be the simplest setup. with a window switch.

[Muscle Master]

Originally Posted by CamaroSpike23

yes. its called direct port.

and thats what I was actually thinking of doing. only downside is it would require some dyno tuning running pig rich at first then leaning it back till everything is right.



now if you ran a fogger system in front of the maf, it would be the simplest setup. with a window switch.

Whats a fogger system..

[Xanthos]

Originally Posted by Muscle Master

Whats a fogger system..

A fogger system sprays the nitrous into the intake piping or throttle body.
- Xanthos

[Muscle Master]

call it a hunch I don't think the LLT can handle alot a pressure from a N2O system

[Mr. Wyndham]

Originally Posted by Muscle Master

call it a hunch I don't think the LLT can handle alot a pressure from a N2O system

The combined cooling effect of N20 AND Direct Injection could end up working in the engine's favor. But nobody's going to know till someone slaps a kit on these engines.

[ArcAngel]

the challenger better hope Chrysler still exists....i doubt it

[Xanthos]

I hope they do... The challenger isn't a bad car, its just a bit too big for my tastes. And the competition is always a good thing.

And no, I'm not talking about weight - I'm speaking of dimensions. It is a large vehicle.
- Xanthos

[CamaroSpike23]

Originally Posted by Muscle Master

Whats a fogger system..

a fogger system is a type of nitrous that offers a more precise distribution of nitrous by having individual lines that go to each port in the intake manifold. Specially designed fogger nozzles atomize the fuel mixture very well so the fuel can be more easily burned.


I should have said a Dry system tho. a dry system is a nitrous system that feeds only nitrous through the intake manifold and not fuel. Fuel is added by the fuel injectors or secondary nozzles if equipped. it is also one of the cheapest setups to do.

Originally Posted by Dragoneye

The combined cooling effect of N20 AND Direct Injection could end up working in the engine's favor. But nobody's going to know till someone slaps a kit on these engines.

wanna be my guinnea pig buddy?