DIY: Door light projector "CAMARO" - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Kendell347 · 12-13-2010, 01:04 PM

Quote:

Originally Posted by Chewy

Seems like more people are catching on!

I got a lot of good response at a car show last weekend. Ran into a couple issues tho:

1. had to wait till after dark to show it off (nothing we can do about that)
2. Trying to KEEP them on...any ideas?

I currently have driver's side wired to the dome light, which works well for about 5 or 10 minutes. but the passenger is wired into the ABL, and goes off after about 30 seconds.

Unless you have the key in the ignition, but then the car beeps at you that the doors are open (to show the light).

someone smart (sick SS) suggestion car show door props, it should simulate the door being closed (no 'dummy' beep) while holding it open (keeping the lights on)

Thoughts? Ideas?

I'd add a switch carrying 12 volts with a diode in it. This way you can run the projectors as is, but you can also keep them on constant. Unfortunately you would probably have to snake a wire into each door, its a bit time consuming but can be done.

TJ91 · 12-17-2010, 05:12 PM

guys i seriously cant wait to do this mod! You guys are all awesome

Cristoff · 12-17-2010, 05:15 PM

Pretty cool mod and a GREAT write up on it!

I've been lurking in the MOD areas of the forum trying to get ideas and this may just be one of them.

Chewy · 12-19-2010, 11:58 AM

Quote:

Originally Posted by Kendell347

I'd add a switch carrying 12 volts with a diode in it. This way you can run the projectors as is, but you can also keep them on constant. Unfortunately you would probably have to snake a wire into each door, its a bit time consuming but can be done.

good idea dude, looks like its going to have to wait till after new years tho. Going back to CA for a couple weeks for the holidays.

I'll let ya know how it goes after i get back

calbert1999 · 12-28-2010, 01:18 PM

Awesome work.
Wish I had the time and patients to do something like this. Wish I knew who the vendor is that makes / installs these items. I'd rather pay the $120. LOL

Kendell347 · 12-28-2010, 01:47 PM

Quote:

Originally Posted by calbert1999

Awesome work.
Wish I had the time and patients to do something like this. Wish I knew who the vendor is that makes / installs these items. I'd rather pay the $120. LOL

They're custom made, anyone can replicate it, thus why its in the DIY section.

calbert1999 · 12-28-2010, 03:53 PM

Quote:

Originally Posted by Kendell347

They're custom made, anyone can replicate it, thus why its in the DIY section.

The OP says they cost $120 - 200 from a vendor. So, who is the vendor?

Hess RS · 04-16-2011, 02:26 AM

I am the original vendor for those of you who are asking. I still sell kits as well, just been busy with work and havent been keeping up with updates on here.

CINDER02 · 03-14-2012, 03:38 PM

Quote:

Originally Posted by calbert1999

The OP says they cost $120 - 200 from a vendor. So, who is the vendor?

lildudekc · 07-13-2012, 06:14 PM

Has anyone found a good wire to use instead of the ABL to wire this box. I wanted to use the dome light that comes on in the car when the door is opened. But could never found which wire powered this in the passenger side.

red_johnny · 07-13-2012, 08:22 PM

I noticed you used 2 cap nuts and 2 normal nuts when fixed to the door panel. Was there a clearance issue?

Badman24 · 09-03-2012, 11:28 PM

I got my led lights from china for $23 shipped. I tied mine into the abl. I have read there are 2 wires behind the speaker that turn on the dome light. This is how the dome light knows the door is open. I think one wire is red with black stripe and the other is yellow. I cannot remember the colors.

red_johnny · 09-04-2012, 08:41 PM

Quote:

Originally Posted by Badman24

I got my led lights from china for $23 shipped. I tied mine into the abl. I have read there are 2 wires behind the speaker that turn on the dome light. This is how the dome light knows the door is open. I think one wire is red with black stripe and the other is yellow. I cannot remember the colors.

Actually I did the same thing. About 23 bucks shipped and look really great. I would say same quality as the others and maybe a bit dimmer but honestly these are really for night use. I tapped into the constant power and the ground that is triggered by the door opening so it goes off as soon as the door is shut.

CWI · 10-03-2012, 06:46 AM

There are ready made alternatives out there if you search. I'm not going to go as far as post a link which would undermine the OP's DIY though. Nuff said.

12-17-2010, 05:12 PM	#72
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 13,033	guys i seriously cant wait to do this mod! You guys are all awesome __________________ CAMARO Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage

12-28-2010, 01:18 PM	#75
calbert1999 Camaro SS Lover Drives: 2010 Camaro 2SS/RS Black IOM Join Date: Jun 2010 Location: Toronto, Ontario (Canada) Posts: 2,863	Awesome work. Wish I had the time and patients to do something like this. Wish I knew who the vendor is that makes / installs these items. I'd rather pay the $120. LOL __________________ 2010 Camaro SS, P1SC SuperCharged Livernois LSX429ci., 1 7/8" LT Headers, full 3" MBRP exhaust, SPI built/tuned, a total

09-03-2012, 11:28 PM	#82
Badman24 Drives: 2SS Black W/GFX Join Date: Nov 2011 Location: South Dakota (EAFB) Posts: 100	I got my led lights from china for $23 shipped. I tied mine into the abl. I have read there are 2 wires behind the speaker that turn on the dome light. This is how the dome light knows the door is open. I think one wire is red with black stripe and the other is yellow. I cannot remember the colors. __________________

10-03-2012, 06:46 AM	#84
CWI Helping Build America Drives: 2010 2SS/RS,LS3 2013 Duramax 3500HD Join Date: Aug 2008 Location: Freeport LPG Export Posts: 3,839 View My Garage	There are ready made alternatives out there if you search. I'm not going to go as far as post a link which would undermine the OP's DIY though. Nuff said. __________________ Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "Holy shit, what a ride!"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: GFX Outlets add Wire Mesh and Paint, Muffler Delete	Li0nel1234	Camaro DIY & HOW-TO instructions & discussions	25	01-07-2017 07:36 PM
DIY Hurst Short Throw Shifter Install - Pix and Video	TAG UR IT	Camaro DIY & HOW-TO instructions & discussions	121	02-26-2015 10:08 AM
My Mods to date...All DIY	markmass	Cosmetics and Lighting Modification Discussions	1	01-14-2010 08:47 AM
DIY Vinyl Bowtie Black Outs	srevoal	Camaro DIY & HOW-TO instructions & discussions	3	12-11-2009 06:13 PM
DIY lowering springs install??	BOULI306	Camaro DIY & HOW-TO instructions & discussions	3	12-08-2009 06:38 PM

12-17-2010, 05:15 PM	#73
Cristoff Drives: 2011 Camaro 2LT RS in Red Jewel Join Date: Dec 2010 Location: Modesto, CA Posts: 463 View My Garage	Pretty cool mod and a GREAT write up on it! I've been lurking in the MOD areas of the forum trying to get ideas and this may just be one of them.

04-16-2011, 02:26 AM	#78
Hess RS Account Suspended Drives: 91 Camaro RS Join Date: Sep 2009 Location: Anaheim Hills, CA Posts: 324	I am the original vendor for those of you who are asking. I still sell kits as well, just been busy with work and havent been keeping up with updates on here.

07-13-2012, 06:14 PM	#80
lildudekc Drives: 2011 2SS RS Summit White L99 Join Date: Sep 2011 Location: Asheville Posts: 19	Has anyone found a good wire to use instead of the ABL to wire this box. I wanted to use the dome light that comes on in the car when the door is opened. But could never found which wire powered this in the passenger side.

07-13-2012, 08:22 PM	#81
red_johnny Drives: 2016 Gray 2SS M6 Join Date: Jun 2012 Location: Hermitage, PA Posts: 753 View My Garage	I noticed you used 2 cap nuts and 2 normal nuts when fixed to the door panel. Was there a clearance issue?