Will Magnaflow 11386 2.5" Oval Muffler fit a 2014 Camaro LS - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Lucky Red · 06-12-2014, 12:43 AM

Also, is this what they call a Resonated X-Pipe? I need something to kill the drone on my Camaro 2014 2LS with MRT V.1. What and where can I buy something to remove the drone?

Thank you guys!

TommyTheCat · 06-12-2014, 01:14 AM

Quote:

Originally Posted by Lucky Red

Also, is this what they call a Resonated X-Pipe? I need something to kill the drone on my Camaro 2014 2LS with MRT V.1. What and where can I buy something to remove the drone?

Thank you guys!

That is a dual inlet dual outlet muffler, looks universal. It will not fit without serious modification and would not sound good.

DSX_Camaro · 06-12-2014, 02:07 AM

Yes it will fit. Tons of people on the forum uses it. I have one myself. It makes the tone deeper. Of course it'll sound good.

TommyTheCat · 06-12-2014, 03:04 AM

Quote:

Originally Posted by DSX_Camaro

Yes it will fit. Tons of people on the forum uses it. I have one myself. It makes the tone deeper. Of course it'll sound good.

I realize now I looked at the wrong muffler.

rtcat600man · 06-12-2014, 05:07 AM

Yes it will fit and help with some of the drone.

dmginc · 06-12-2014, 06:24 AM

Quote:

Originally Posted by TommyTheCat

That is a dual inlet dual outlet muffler, looks universal. It will not fit without serious modification and would not sound good.

this is the resonated x-pipe we all use....it fits perfectly and sounds awesome.

TheShowStopperLFX · 06-12-2014, 07:50 AM

http://youtu.be/InqrlnieVpk

Lucky Red · 06-12-2014, 09:46 AM

Thanks guys!

My mechanic is not very knowledgeable, where should I tell him to weld the X-pipe?

dmginc · 06-12-2014, 10:06 AM

look at images rtcat600man posted. it replaces the H-pipe that is currently a part of your exhaust system.

Lucky Red · 06-12-2014, 10:48 AM

Hopefully this decreases the drone at the 2k RPM range. I live in a very hilly area and I wanted to shoot myself

after I drove it out of the shop with the new MRT V1

rtcat600man · 06-12-2014, 12:13 PM

I added the Resonated X pipe to take care of the RASP after installing my OBX headers. I was surprised and happy that it took care of 95 % of the drone I had with my MRT 2.0's too.

13umble13ee · 06-14-2014, 01:44 PM

I put it where the heat shield is on my '12 1ls fits perfect. you have to remove the bracer and then cut the metal piece to spread the pipes to fit at the inlet side.

gmooney72 · 07-10-2014, 02:23 PM

Have it on my 2014 RS. Not a hard job to do , any muffler shop should be able to do it. Sounds good and gets rid of most of the drone. Get it!!!

JDP Sales · 07-11-2014, 11:21 AM

The Magnaflow Resonated X Pipe Part # 11386 is very popular for the V6 guys and even the V8 guys for reducing drone and rasp. It does have to be welded in, but it's an easy job for any exhaust shop.

Feel free to call, PM or email me anytime with questions.

Best regards,

Tyler
888-308-6007

06-12-2014, 12:43 AM	#1
Lucky Red Drives: 2014 Camaro Join Date: May 2014 Location: San Diego Posts: 5 View My Garage	Will Magnaflow 11386 2.5" Oval Muffler fit a 2014 Camaro LS Also, is this what they call a Resonated X-Pipe? I need something to kill the drone on my Camaro 2014 2LS with MRT V.1. What and where can I buy something to remove the drone? Thank you guys!

06-12-2014, 02:07 AM	#3
DSX_Camaro Drives: 2013 SW 2LT/RS LFX/AY6 Join Date: Feb 2013 Location: Orlando, FL Posts: 1,741	Yes it will fit. Tons of people on the forum uses it. I have one myself. It makes the tone deeper. Of course it'll sound good. __________________ K&N CAI, 1LE Strut Tower Brace, Elite Engineering Catch Can and Clean Side Separator, Apex Scoop w/ Washer Relocation Kit, CTS Front Calipers and Rotors, JacFab Ported Intake Manifold, JacFab Intake Manifold Spacer, 80mm Overkill Throttle Body, SS Brake Lines, Ideal Garage Master Cylinder, Monster Twin Disc Clutch, NPP Retrofit w/ Magnaflow Resonated X, ARH Catless Downpipes, JRE Built 3.45 Diff, 1LE Axles, 1LE Hubs, Overkill Tuned, BMR Anti Wheel-hop Kit Stage I, ACS TL1 Hood Insert, ZL1 Spoiler

06-12-2014, 05:07 AM	#5
rtcat600man having FUN now 13.66@101 Drives: 2010 2LT IOM Join Date: Nov 2009 Location: Clarkston, Michigan Posts: 9,230 View My Garage	Yes it will fit and help with some of the drone. Attached Images __________________ MY BUILD

06-12-2014, 10:06 AM	#9
dmginc Drives: In Circles Join Date: Mar 2011 Location: South Carolina Posts: 3,433 View My Garage	look at images rtcat600man posted. it replaces the H-pipe that is currently a part of your exhaust system. __________________ CAI Cold Air Intake, BMR Strut Tower Brace, BMR 1.2" Lowering Springs Gen5DIY Fog Lights, Big Worm Third Brake Light/Side Marker Tint (Charcoal) GTS Tail Light Covers, Purple Under Hood Lighting Magnaflow Resonated X-Pipe w/ Muffler Delete Black Plasti Dipped Wheels, Z/28 Spoiler

06-12-2014, 12:13 PM	#11
rtcat600man having FUN now 13.66@101 Drives: 2010 2LT IOM Join Date: Nov 2009 Location: Clarkston, Michigan Posts: 9,230 View My Garage	I added the Resonated X pipe to take care of the RASP after installing my OBX headers. I was surprised and happy that it took care of 95 % of the drone I had with my MRT 2.0's too. __________________ MY BUILD

06-12-2014, 07:50 AM	#7
TheShowStopperLFX Drives: 2012 LFX Join Date: Mar 2013 Location: Macomb,Michigan Posts: 102	http://youtu.be/InqrlnieVpk

06-12-2014, 09:46 AM	#8
Lucky Red Drives: 2014 Camaro Join Date: May 2014 Location: San Diego Posts: 5 View My Garage	Thanks guys! My mechanic is not very knowledgeable, where should I tell him to weld the X-pipe?

06-12-2014, 10:48 AM	#10
Lucky Red Drives: 2014 Camaro Join Date: May 2014 Location: San Diego Posts: 5 View My Garage	Hopefully this decreases the drone at the 2k RPM range. I live in a very hilly area and I wanted to shoot myself after I drove it out of the shop with the new MRT V1

06-14-2014, 01:44 PM	#12
13umble13ee Drives: 2012 1LS V6 LFX Join Date: Jun 2014 Location: Atlanta GA Posts: 134	I put it where the heat shield is on my '12 1ls fits perfect. you have to remove the bracer and then cut the metal piece to spread the pipes to fit at the inlet side.

07-10-2014, 02:23 PM	#13
gmooney72 Drives: 2014 Chevrolet Camaro 2LT RS Join Date: Mar 2014 Location: Bronx New York Posts: 50 View My Garage	Magnaflow Resonated X-pipe Have it on my 2014 RS. Not a hard job to do , any muffler shop should be able to do it. Sounds good and gets rid of most of the drone. Get it!!!

07-11-2014, 11:21 AM	#14
JDP Sales Drives: Chevys at the limit Join Date: Nov 2010 Location: SLC, UT Posts: 9,621	The Magnaflow Resonated X Pipe Part # 11386 is very popular for the V6 guys and even the V8 guys for reducing drone and rasp. It does have to be welded in, but it's an easy job for any exhaust shop. Feel free to call, PM or email me anytime with questions. Best regards, Tyler 888-308-6007