eBay Z28 spoiler for 2010-2013? - Page 9 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Aero_Sport_Concepts · 03-02-2016, 03:52 PM

Quick update. We are now offering the same Spoiler and Color Matched options, along with an option to have one of our Wicker Extension Kits Pre-Installed. Visit our website for more information.

www.aerosportconcepts.com

Sent from my XT1254 using Tapatalk

MackMan · 03-02-2016, 03:54 PM

Quote:

Originally Posted by Aero_Sport_Concepts

Quick update. We are now offering the same Spoiler and Color Matched options, along with an option to have one of our Wicker Extension Kits Pre-Installed. Visit our website for more information.

www.aerosportconcepts.com

Sent from my XT1254 using Tapatalk

Dang wish I would have known that first haha. Would have gotten you all to install the wickerbill, kinda nervous about all that!

Aero_Sport_Concepts · 03-02-2016, 03:57 PM

Quote:

Originally Posted by MackMan

Dang wish I would have known that first haha. Would have gotten you all to install the wickerbill, kinda nervous about all that!

It's not to hard to install. Just take your time on measuring and marking things up. Like they always say measure twice cut once. Well this time measure 3-4 times and cut once.

Sent from my XT1254 using Tapatalk

MackMan · 03-02-2016, 03:58 PM

Quote:

Originally Posted by Aero_Sport_Concepts

It's not to hard to install. Just take your time on measuring and marking things up. Like they always say measure twice cut once. Well this time measure 3-4 times and cut once.

Sent from my XT1254 using Tapatalk

Was hoping my wickerbill would be here Friday but it says Tuesday now. :( Boo!

xc_SS/RS · 03-02-2016, 04:41 PM

You must've been the guy the eBay seller contacted haha looks like I've found a new spoiler!

clarkkent · 03-02-2016, 05:03 PM

Quote:

Originally Posted by Aero_Sport_Concepts

Quick update. We are now offering the same Spoiler and Color Matched options, along with an option to have one of our Wicker Extension Kits Pre-Installed. Visit our website for more information.

www.aerosportconcepts.com

Sent from my XT1254 using Tapatalk

Dang that's reasonable! Hmm oh well, I guess I'll stick with the ZL1 one (for now) lol. Great that you guys are making one

olblue75 · 03-02-2016, 06:05 PM

Quote:

Originally Posted by Aero_Sport_Concepts

It's not to hard to install. Just take your time on measuring and marking things up. Like they always say measure twice cut once. Well this time measure 3-4 times and cut once.

Sent from my XT1254 using Tapatalk

Would you be willing to sell the hardware an instructions for a wicker because I bought one of these spoilers to.....

Aero_Sport_Concepts · 03-02-2016, 06:29 PM

Quote:

Originally Posted by olblue75

Would you be willing to sell the hardware an instructions for a wicker because I bought one of these spoilers to.....

Not sure what you mean. You just need Hardware for a Wicker you already have??

Sent from my XT1254 using Tapatalk

olblue75 · 03-02-2016, 06:43 PM

Ordered a spoiler and will be ordering a wicker if I buy your wicker it includes instructions and hardware correct???

Aero_Sport_Concepts · 03-02-2016, 06:45 PM

Quote:

Originally Posted by olblue75

Ordered a spoiler and will be ordering a wicker if I buy your wicker it includes instructions and hardware correct???

Okay ya correct Hardware instructions and also the Tool to install the Nutsert

Sent from my XT1254 using Tapatalk

TurboNarwhal · 03-05-2016, 03:07 PM

Got mine in a couple of days ago, and finally installed this morning. Finish is great but as MackMan said, the holes did not line up properly. I also was not satisfied with the supplied screws that came with the spoiler, they were only about 1/2 inch long, replaced them with longer ones that actually went all the way through the fiberglass, feel much better about it.

MackMan · 03-05-2016, 04:22 PM

Quote:

Originally Posted by TurboNarwhal

Got mine in a couple of days ago, and finally installed this morning. Finish is great but as MackMan said, the holes did not line up properly. I also was not satisfied with the supplied screws that came with the spoiler, they were only about 1/2 inch long, replaced them with longer ones that actually went all the way through the fiberglass, feel much better about it.

Awesome! Looking good! Yeah I'll replace the screws too once I take it off again when I wrap it.

See your from Kentucky too! Pretty sweet haha.

Sent from my iPhone using Tapatalk

TurboNarwhal · 03-05-2016, 04:33 PM

Lol. I didn't notice you were from Kentucky as well. I actually had a hell of a time installing mine to be honest dropped a screw into my truck lid. Pro tip: don't do that, had to remove the trunk to fish it out, though that made mounting a spoiler without studs easier, lol.

Mine has to come off come nicer weather as well, planning on pulling my stripes off and they are now solidly under my spoiler.

MackMan · 03-05-2016, 04:37 PM

Quote:

Originally Posted by TurboNarwhal

Lol. I didn't notice you were from Kentucky as well. I actually had a hell of a time installing mine to be honest dropped a screw into my truck lid. Pro tip: don't do that, had to remove the trunk to fish it out, though that made mounting a spoiler without studs easier, lol.

Mine has to come off come nicer weather as well, planning on pulling my stripes off and they are now solidly under my spoiler.

I did the same thing, lost one of the nuts in the trunk lid. I'll fish it out when I have more time to do so.

Sent from my iPhone using Tapatalk

03-02-2016, 03:52 PM	#113
Aero_Sport_Concepts aerosportconcepts@gmail Drives: '15 1SS-RS/1LE (RRM) Join Date: Dec 2011 Location: Menifee, SoCal Posts: 1,387 View My Garage	Quick update. We are now offering the same Spoiler and Color Matched options, along with an option to have one of our Wicker Extension Kits Pre-Installed. Visit our website for more information. www.aerosportconcepts.com Sent from my XT1254 using Tapatalk __________________

03-02-2016, 04:41 PM	#117
xc_SS/RS Drives: 2010 Camaro SS/RS Join Date: Mar 2014 Location: somewhere in MD Posts: 4,883	You must've been the guy the eBay seller contacted haha looks like I've found a new spoiler! __________________ 2010 2SS/RS Z/28 intake, NW, FAST 102, speed engineering LT's, some exhaust, ATI -10% pulley, GM flex fuel injectors, DSX flex fuel sensor, MGW shifter, HP Tuners, some suspension work, stickers and a little weight loss. 12.63 @113.53

03-02-2016, 06:43 PM	#121
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,064	Ordered a spoiler and will be ordering a wicker if I buy your wicker it includes instructions and hardware correct??? __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

03-05-2016, 03:07 PM	#123
TurboNarwhal Drives: 2010 Camaro 2SS/RS Twin Turbo Join Date: Jan 2014 Location: Elizabethtown, KY Posts: 240	Got mine in a couple of days ago, and finally installed this morning. Finish is great but as MackMan said, the holes did not line up properly. I also was not satisfied with the supplied screws that came with the spoiler, they were only about 1/2 inch long, replaced them with longer ones that actually went all the way through the fiberglass, feel much better about it. __________________

03-05-2016, 04:33 PM	#125
TurboNarwhal Drives: 2010 Camaro 2SS/RS Twin Turbo Join Date: Jan 2014 Location: Elizabethtown, KY Posts: 240	Lol. I didn't notice you were from Kentucky as well. I actually had a hell of a time installing mine to be honest dropped a screw into my truck lid. Pro tip: don't do that, had to remove the trunk to fish it out, though that made mounting a spoiler without studs easier, lol. Mine has to come off come nicer weather as well, planning on pulling my stripes off and they are now solidly under my spoiler. __________________