06-06-2013, 11:28 PM | #1 |
Oreo
Drives: Summit White LT/RS A6 Join Date: Dec 2010
Location: Waco TX
Posts: 1,248
|
Doing full door abl
So I've been looking through this thread and I want to clarify some things. First of all I am under the impression that the only extra modification that needs to be done to the door is sanding the bottoms? How do I go about completing this part? It seems you mask off what you want to sand and then go at it with a dremel but does anyone have more specific instructions before i mess up my panels haha
|
06-07-2013, 11:45 AM | #2 |
Oreo
Drives: Summit White LT/RS A6 Join Date: Dec 2010
Location: Waco TX
Posts: 1,248
|
Bump
|
06-08-2013, 09:49 AM | #3 |
Drives: 2010 1ssrs Join Date: Apr 2009
Location: Edinburg Texas
Posts: 669
|
Sorry man I just saw your message today. You do not need to use a dremel! you just need to sand by hand, with sheets of sand paper. You do not need to mask off anything either.
__________________
|
06-08-2013, 12:23 PM | #4 |
GAHDOOSH
Drives: 2016 Camaro 1SS Join Date: Apr 2013
Location: Greenville, South Carolina
Posts: 502
|
Do us all a favor and record the sanding process and results!
A lot of people are asking about this
__________________
GAHDOOSH
2016 1SS 6.2L LT1 Manual 6-Speed, Front Emblem Blackout, Rear Bowtie Delete, Side emblem delete, Phastek Side Marker Tint, GM Black Taillights, $23.57 of Premium Gas this morning |
06-08-2013, 05:33 PM | #5 |
Oreo
Drives: Summit White LT/RS A6 Join Date: Dec 2010
Location: Waco TX
Posts: 1,248
|
alright sweet. So I use a rough sand paper then a smooth one? It sounds easy but we will see
|
06-09-2013, 11:27 PM | #6 |
Drives: 2010 1ssrs Join Date: Apr 2009
Location: Edinburg Texas
Posts: 669
|
Yes sir it is easy, just look at how much I sanded in my photos and match it.
__________________
|
06-10-2013, 09:21 AM | #7 |
Drives: 2ss/rs vr 6m Join Date: Mar 2009
Location: New Port Richey,fl
Posts: 2,831
|
Definetly not with a dremel. Lol. Some 300 grit sand paper works fine. You can run a line a painters tape along the edge so you Have a nice straight line, or so you don't accidently sand off the wrong paint.
|
06-10-2013, 10:16 AM | #8 |
Drives: 2011 Convertible 2LT/RS Join Date: Mar 2012
Location: Phoenix
Posts: 52
|
When I did mine I used gorilla tape as a border/guide. I used this type of tape since it was thick and I didn't have to worry about rubbing up against it since the sanding is very tedious. For the sanding part I used a sanding pen (link below). Using this was great as it left the sanded parts with even clean lines. If you choose this option you also may want buy a few extra sanding tips and rubber gloves.
http://www.summitracing.com/parts/kti-70550 |
06-17-2013, 06:41 PM | #9 |
Oreo
Drives: Summit White LT/RS A6 Join Date: Dec 2010
Location: Waco TX
Posts: 1,248
|
Alright everything is all ordered. I'm just waiting for it to ship. I'll probably just post here instead of creating a new thread
|
06-23-2013, 03:02 PM | #10 |
Oreo
Drives: Summit White LT/RS A6 Join Date: Dec 2010
Location: Waco TX
Posts: 1,248
|
The light tubes and cup holder plate came in. Still waiting on RPI to finally ship the door panels haha
|
06-23-2013, 05:13 PM | #11 |
Drives: '16 2SS Join Date: Apr 2011
Location: Chicago Suburbs
Posts: 2,271
|
Wow. Bonus shoe in the shipment!
Looks good so far! |
06-24-2013, 08:35 AM | #12 |
Drives: 2013 Black Camaro 2SS/RS Convert. Join Date: Jun 2013
Location: Sauk Village, Illinois
Posts: 506
|
I likey
__________________
2013 Camaro 2SS/RS-Smoked tail lights and side markers, HID log lights, & LED lighting inside/outside the car, SJM LED Cupholder, SJM full dashboard ABL lighting, ZL1 Rockers, 1LE Splitter, Showstopper LED Mirrors, Showstopper LED Side Markers, & Showstopper Heat Extractor Hood, 20" Niche Concourse ZL1 Styled wheels 20X8.5 & 20X10 with 275/40/20 & 315/35/20 Nitto Invos, Black Gorilla Lug Nuts/Locks, Black Billet Elite Camaro License Plate Holder, and Hydro Dipped Speedo/Shifter/AC-Heat Bezels.
|
06-25-2013, 12:59 AM | #13 |
Oreo
Drives: Summit White LT/RS A6 Join Date: Dec 2010
Location: Waco TX
Posts: 1,248
|
So I've been using the cup holder light for a couple days and I have just two complaints. On mine the front two Velcro pads didn't lock all the way. Like if one is locked in all the way then the other one pops out. The other thing is the console lid in the back is more difficult to open. I believe it's because the plate is a bit high and I wired through the latch hole. Thankfully I can play around and fix these problems with a bit of creativity. It looks fantastic when paired with the footwells!
Update: RPI panels have shipped!! |
06-25-2013, 06:49 AM | #14 |
Drives: '16 2SS Join Date: Apr 2011
Location: Chicago Suburbs
Posts: 2,271
|
I've not heard that one before (rocking at the front). I'll look for this.
On the console lid, just lift up on the front of it. Don't try to pull on the the latch. They do look good! |
|
|
Tags |
full abl |
|
|