2010 Victory Red 1LT/RS Build Thread [Auto-X & DD]

[Colt]

Hey Everyone, this is Lil' Red, my 2010 1LT/RS Victory Red Camaro. It was #645 off the production line. I'm currently 19, and my parents bought me this car when it first came out. My dad also purchased a 2011 Black 1SS/RS a year later. So, shorty after the purchase of this car, she was in a wreck.

http://www.camaro5.com/forums/showthread.php?t=25702

After this was resolved, I began to make her my own. I am now attending the University of Tennessee for nuclear engineering and have recently found an addiction to autocross. I'm running with the ETR group of SCCA for the Spring, but that will probably change when school lets out. Below is a list of my current mods, and upcoming mods. Hope you all enjoy.



Table of Contents

Custom Engine Cover Project (Pg 1) (Post #3)
Autocross Event 7/28/13 (Photo Heavy) (Pg 1) (Post #18)
Tail of the Dragon 10/19/13 (Photo Heavy) (Pg 1) (Post #23)
Engine Bay Lighting Project (Pg 2) (Post #34)
Camaro5 Fest IV 8/1-3/13 (Photo Heavy) (Pg 2) (Post #36)
Opening ETR Autocross Event @ Pellissippi State 2/23/14 (Photo Heavy) (Pg 2) (Post #44)
ETR Autocross Event #2 @ Pellissippi State 3/9/14 (Pg 2) (Post #48)
ETR Autocross Event #3.5 @ Pellissippi State 6/8/14 (Pg 3) (Post #54)


Mod List

Cosmetic

AAC Interior Lighting
AAC Engine Bay Lighting
ACS Hoodliner
ACS T2 Front Splitter
Defenderworx Locking Gas Cap
DVS Customs Leather Shifter Boot
DVS Customs Leather E-Brake Boot
Emblempros Black Onyx 3.6L Badges
Emblempros Black Onyx Camaro Badges
Engine Bay Wire Looms
GM Heritage Grille
Headlight Armor Light Tint
Hurst Tap-Shifters
IVS Havoc Custom Console Lid
IVS Havoc Custom Seats
Lloyd Custom Floormats
MnP Rear Fascia Blackout
MnP Side Marker Blackout
Rider Graphix Hash Marks
Rider Graphix Front Fascia Blackout
Street Scene Lower Grille w/ Ducts
Unrestricted Motorsports Spoiler
Vinyl Bowties
Vinyl Gill Slits
Window Tint 30%
Custom Engine Bay Lighting
Custom Front Wheel Air Deflectors
Custom Painted Intake Manifold
Custom Painted Interior Panels
Custom Painted Tail Light Bezels
Custom Painted Brake Calipers
Custom Painted Rims
Custom Painted Valve Pan Covers


Engine

Apex Washer Bottle Relocator
Apex Air Scoop
Black Ice-Olator
CAI Cold Air Intake
MRT v2.0 Axle Back Exhaust
VMAX Ported Throttle Body


Suspension/Wheel

BMR 1" Front with 1.2" Rear Drop Springs
BMR Rear End Links
BMR Rear Sway Bar
H&R Wheel Adapters 25mm
Pirelli PZero 245/45 20 Square Setup


Future

Hawk HP Plus Pads
New Autocross Numbers
TSW Nurburgring Wheels
SRP Heel Pad
CG-Lock
SS Rear Cradle w/ 3.91 Gears
DIY: Cradle Bushing Inserts
BMR Front Sway Bar with Endlinks
Bushing Inserts
Koni Orange Struts
SS Calipers, R1 Slotted Rotors, Goodrich Braided Lines, Hawk HPS Pads, Better Fluid
JDP Brake Ducts
MPD1 Smooth Exhaust Panel
******** Rear Access Bowtie Cutout
Rear Seat Delete
Suspension Upgrades
19"x10" w/ 19"x11" Forgestar CF5V Staggered Setup
Autocross Slicks
2014 Front Fascia without RS PKG – 22997719 $343.16
2014 Headlamp without RS PKG - 23187850, 23187851 $261.04 each
2014 Front Fog Lamp – 22830038 $58.14 each
2014 Front Fog Bezel - LH-22829542--RH-22829543 $10.89 each
2014 Upper grille – 22965834 $362.95

Awards

BW3 1st Annual "Pedal to the Metal" Car Show (3rd Place)
Chuck Garrett's Moderator Choice Award Camaro5 Fest IV


DIY

Front Wheel Air Deflectors


Photo Timeline

[4thGen427CI]

Looks great! Very tasteful not too over done

[Colt]

Added my new IVS Havoc interior, ACS T2 splitter and my Unrestricted Motorsports spoiler. Working on a new v6 engine cover, and cleaning up my engine bay.

The Engine Cover Project






This project has been put off, since we painted and polished most of what it would have covered.

Instead I decided to go this route:

[SilverSlayer-SS]

Looks great ! Love the interior , how much did u get it for ?

[Colt]

I bought it from Southern Car Parts. I think it is like a $800-$900 kit, but what happened was a guy ordered the kit, then sold his car before recieving the kit, so Southern Car Parts took the kit back for him and had a one time sale price of $700, and thats the kit I got.

It came with Front and Rear Seats, Center Console, and Door/Dash Trim which I didn't install.

[Sparkey]

Engine cover looks very interesting, got a finished product yet

[Kartashian]

Hey man, love the ground effect from the front... It's too damn good!! From where did you get it ?

[Colt]

Originally Posted by Sparkey

Engine cover looks very interesting, got a finished product yet

We actually put that on the backburner for now. We ended up just polishing the intake and painting the head covers instead.

The splitter is the ACS T2 splitter.

[bb040]

i stumbled on your build pics very nice.... love to see your engine cover. i think it would look killer in carbon fiber

[Vengeance Graphix]

Looking good!

[cliffdog89]

I am really digging your setup. Are the rims painted black or powder coated? Where did you get them done at? Also, where did you purchase the front ground effect kit from? Nice looking ride.

[Colt]

Originally Posted by cliffdog89

I am really digging your setup. Are the rims painted black or powder coated? Where did you get them done at? Also, where did you purchase the front ground effect kit from? Nice looking ride.

Thanks man. The rims are actually just plastidipped for right now, since I plan on getting new rims this spring. The front splitter is the ACS T2 splitter.

[Behic2320]

Great job so far man looks great I love that spoiler, keep up the good work

[IBM camaro]

really well done red