Add HUD to your 2010 - Page 25 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jeepguy_1980 · 10-16-2010, 12:56 PM

You could use a piece of butcher paper to make a stencil for the cut out from a 2011 Camaro.

2SSRS@Gen5diy · 10-16-2010, 01:06 PM

Quote:

Originally Posted by camaro1

what do you need, i have all the gm wiring schematics right in front of me

wiring looks pretty simple, only 6 wires

hud pin 4=B+
pin 6=ground
pins 1,2,3 go to the hud switch
pin 7 is your serial data line(pin 1 at your dlc connector under the dash)

pin 1 hud goes to pin 3 at switch
pin 2 hud goes to pin 1 at switch
pin 3 hud goes to pin 6 at switch

You are missing one wire the one for the lights of the switch, So thhere are 7 wires.

Quote:

Originally Posted by op z

Do you have the connector end views or connector part numbers?

Why do you need the View of the connector, You can not get it from any one but Delphi, I ordered 1056 And will have them soon, So if you need a Harness let me know.

Quote:

Originally Posted by Memphis SS

Congrats on getting your HUD up and going in your 2010.. Can't wait to see pictures.. I know in the Corvettes that added HUD it look really nice but not quit as clear as the cars with the proper windshield. I wonder if that is the case on the Camaro or did they all come with the glass designed for HUD since it already had the location next to the steering wheel. If you get some time would be good info to know if you take yours to the dealer and have next to a 2011 and compare to see if you could tell any diff.
Again Congrats and I know you have made some people with 10s really happy on the site.. NICE JOB!!!

Thank you, but i mad my self really happy Too.

Quote:

Originally Posted by jeepguy_1980

You could use a piece of butcher paper to make a stencil for the cut out from a 2011 Camaro.

Thanks that's right.

HaZe_X · 10-16-2010, 01:14 PM

WOW OMG!!! I hope you make the harness for this, better start a list now cuz I know I want and so do a bunch of other people...

Cam 427 · 10-16-2010, 02:59 PM

Thanks for your hard work in figuring this out. American ingenuity at its best!
Please put me down for a harness.

bmrinell · 10-16-2010, 04:22 PM

Please put me down for a harness... I will be looking forward to doing this when I have to tuck my "baby" away for the winter soon.... it'll give me an incentive.... to get through our long MN winters.

camarorick · 10-16-2010, 04:32 PM

Congratulations

Can't wait for the final bill of material. Will you be able to do a detail schematic of this harness ?

Awesome.... just awesome

YLWJKT · 10-16-2010, 05:20 PM

I'll take a harness as well please.

Moreno1 · 10-16-2010, 05:27 PM

Congrats! This is a major accomplishment!

Blackhawk6 · 10-16-2010, 06:58 PM

Congrats!!!! Great work...

chevy 3 · 10-16-2010, 09:13 PM

Saw this today in a green Ss and have to have this. Please put me on the list for a harness. Thanks. Some pics of install in the dash would be cool.

Rcfiddy1 · 10-16-2010, 09:16 PM

Awesome job

Put me in for a harness. As soon as part numbers are listed I am ordering....

TonyNo · 10-16-2010, 09:45 PM

So, you have tried it and it all functions? Not just the power-on?

If so, congrats!

10_SS · 10-16-2010, 09:56 PM

2011 HUD Features and Instructions can be found here: http://www.chevrolet.com/assets/pdf/...aro_owners.pdf 2SSRS energy is awesome!

Ivan @ Southwest Speed · 10-16-2010, 10:38 PM

All parts ordered so that I can have something ELSE to do over the Winter.....

Might be hitting you up for that harness however.

Well done sir.
Ivan

10-16-2010, 01:14 PM	#339
HaZe_X Drives: Trailblazer SS & Camaro SS Join Date: Nov 2009 Location: North Jersey Posts: 758	WOW OMG!!! I hope you make the harness for this, better start a list now cuz I know I want and so do a bunch of other people... __________________ 2010 Camaro 2SS/RS/LS3 -Black on Black - Kooks 1-7/8 Headers, Dyno Tuned, ADM Race CAI, QTP Cutouts, Hurst Short Throw, SJM Line Lock, Alpine PDX 1.1000, (2) Alpine Type R's, ...Soon to be cammed!

10-16-2010, 06:58 PM	#345
Blackhawk6 Drives: Born:18 Sept 2009 #47903 Join Date: Oct 2009 Location: Gloucester Virginia Posts: 1,500 View My Garage	Congrats!!!! Great work... __________________ 2010 Camaro 2SS________________________________________Litho#140

10-16-2010, 09:16 PM	#347
Rcfiddy1 Sold car... Drives: 2010 Rally Yellow 2SS/RS #37115 Join Date: Oct 2009 Location: Manalapan, New Jersey Posts: 2,019 View My Garage	Awesome job Put me in for a harness. As soon as part numbers are listed I am ordering.... __________________ Build Thread ECS Novi 1500 Supercharged, LS3 conversion, Small blower cam, Alky Meth injection, 3:45 rear, BMR Suspension parts, 1LE Sways, Billy Boat ZL1 dual mode exhaust.

10-16-2010, 09:45 PM	#348
TonyNo Drives: 2016 2SS, SW Join Date: Oct 2009 Location: Chicago Suburbs Posts: 1,079	So, you have tried it and it all functions? Not just the power-on? If so, congrats! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Cosmetics and Lighting Modification Discussions	36	04-02-2020 05:32 PM
February 2010 Camaro production & sales figures. Tops Mustang for 9th straight month!	Tran	5th Gen Camaro SS LS LT General Discussions	52	03-03-2010 09:39 PM
DEALER ONTARIO CANADA WE SHIP ANYWHERE IN CANADA 2010 CAMAROS FOR SALE IN STOCK NOW!	dz	Dealer Camaros for Sale	0	03-03-2010 05:43 PM
Zex Nitrous System for 2010 Camaro SS @ BMC Performance!	Kris@BMCPerformance	Forced Induction	2	02-18-2010 06:59 PM
2010 Chevrolet Camaro makes finalist list for 2010 World Car Design of the Year	Tran	5th Gen Camaro SS LS LT General Discussions	37	02-17-2010 04:22 PM

10-16-2010, 12:56 PM	#337
jeepguy_1980 Drives: 2010 Camaro 1SS Join Date: May 2010 Location: Newport News Posts: 1,310 View My Garage	You could use a piece of butcher paper to make a stencil for the cut out from a 2011 Camaro.

10-16-2010, 02:59 PM	#340
Cam 427 Drives: 2010 2SS Join Date: Apr 2010 Location: Washington Posts: 677	Thanks for your hard work in figuring this out. American ingenuity at its best! Please put me down for a harness.

10-16-2010, 04:22 PM	#341
bmrinell Drives: 2010 Camaro 2SS/RS Black, 6M Join Date: Oct 2010 Location: Northern Minnesota Posts: 17	Please put me down for a harness... I will be looking forward to doing this when I have to tuck my "baby" away for the winter soon.... it'll give me an incentive.... to get through our long MN winters.

10-16-2010, 04:32 PM	#342
camarorick Drives: . Join Date: Jan 2008 Location: . Posts: 2,166	Congratulations Can't wait for the final bill of material. Will you be able to do a detail schematic of this harness ? Awesome.... just awesome

10-16-2010, 05:20 PM	#343
YLWJKT Drives: 2017 ZL1 Join Date: May 2010 Location: Texas Posts: 327	I'll take a harness as well please.

10-16-2010, 05:27 PM	#344
Moreno1 Drives: G5.R Join Date: Sep 2010 Location: SoCal Posts: 2,377	Congrats! This is a major accomplishment!

10-16-2010, 09:13 PM	#346
chevy 3 NEcamaro5 Drives: Black 2ss rs 1LE Join Date: Apr 2009 Location: mass Posts: 4,328 View My Garage	Saw this today in a green Ss and have to have this. Please put me on the list for a harness. Thanks. Some pics of install in the dash would be cool.

10-16-2010, 09:56 PM	#349
10_SS Drives: 2010 2SS/RS Join Date: Jul 2010 Location: MS Posts: 40	2011 HUD Features and Instructions can be found here: http://www.chevrolet.com/assets/pdf/...aro_owners.pdf 2SSRS energy is awesome!

10-16-2010, 10:38 PM	#350
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,170	All parts ordered so that I can have something ELSE to do over the Winter..... Might be hitting you up for that harness however. Well done sir. Ivan