11-17-2012, 03:39 PM | #1 |
Drives: Camaro EU (2SS/RS)&Skoda Octavia RS Join Date: Mar 2012
Location: Germany
Posts: 106
|
Strange (???) sound when accelerating or not? (LS3) with video
Now with almost 1000 miles on our 2013 EU Camaro LS3 2SS I can say that it is absolutely great.
...but there is one little thing which worries me a little bit. There is a strange sound when accelerating besides the normal engine, wind an tires sound. It seems to come from the middle of the dash. It's only there when driving in gear around 2000-3500 rpm and not when reving the engine in neutral with the same rpm. http://s303.beta.photobucket.com/use...2464f.mp4.html http://i303.photobucket.com/albums/n...d0df16c40a.mp4 I think the sound I'm refering to is noticable in the videos (not the deep engine sound but the lighter sound when accelerating); it's a light ticking-rattling-"slurping" sound. Unfortunately the closest dealer here in Germany at my place has not enough experience with Camaro cars to say if it is normal or not. Something I should be worried about? Cheers from Germany Michael Last edited by Michael R.; 11-18-2012 at 01:51 AM. |
11-19-2012, 11:20 AM | #2 |
Drives: Camaro EU (2SS/RS)&Skoda Octavia RS Join Date: Mar 2012
Location: Germany
Posts: 106
|
Update from today:
A few Camaro owners from the German forum suggested to check the hurst shifter and to keep the shifter in my hand to see if this would effect the noise. Tried it out today and noise seems to change or even disappears when holding the shifter during acceleration or when pushing it in certain directions. Also found a "hurst short shifter noise reduction kit" advertised on the internet. So this is normal from the shifter's play? Cheers Michael |
11-22-2012, 08:55 PM | #3 |
|
My short shifter made a rattle sound, it was worse when you hold the shifter knob. It's annoying but not a whole lot you can do about it.
Is it the Hurst shifter that comes with the Camaro or the after market Hurst?
__________________
My Build Thread
http://camaro5.com/forums/showthread...=1#post5036900 Maureen@Rodgers Chevrolet...The best prices and customer service period!!(734)676-9600 Gen5Diy.com.....http://www.gen5diy.com/ Wretched Motorsports..www.wretchedms.com/ Pedders USA...http://www.peddersusa.com/ |
11-23-2012, 12:26 PM | #4 |
Drives: Camaro EU (2SS/RS)&Skoda Octavia RS Join Date: Mar 2012
Location: Germany
Posts: 106
|
Thanks for your reply.
It's the one which comes with the car from GM; not the aftermarket one. Cheers Michael |
11-23-2012, 12:52 PM | #5 | |
|
Quote:
The Hurst noise reduction kit isn't for the GM version, its for the billet 2 Hurst shifter from what I remember
__________________
My Build Thread
http://camaro5.com/forums/showthread...=1#post5036900 Maureen@Rodgers Chevrolet...The best prices and customer service period!!(734)676-9600 Gen5Diy.com.....http://www.gen5diy.com/ Wretched Motorsports..www.wretchedms.com/ Pedders USA...http://www.peddersusa.com/ |
|
|
|
|
|