10-05-2012, 01:17 PM | #1 |
Drives: 2011 Silver 2SS/RS L99 Join Date: Jul 2011
Location: Louisiana
Posts: 191
|
Gauges (Nitrous and Nitrogen Pressure)
All, I'm curious as to what you guys are using in the way of gauges. I'm about install the Nitrogen/Nitrous system I scored off the forum, and am trying to figure out a gauge setup for pressure on the two bottles.
Functionality is important but also want something that looks good. I'm even interested in going ole skool and stick them out on the hood! I would love to get some feedback as well as pictures if possible. Thanks ahead of time
__________________
2011 2SS/RS L99
10.76@130.5 1.67 60' LG headers and exhaust, 3200 Yank, EPS Cam, D1SC Procharger, all work performed by Blanchard Performance |
10-06-2012, 11:26 PM | #2 |
Drives: 2011 Silver 2SS/RS L99 Join Date: Jul 2011
Location: Louisiana
Posts: 191
|
Nobody has any recomendations?
__________________
2011 2SS/RS L99
10.76@130.5 1.67 60' LG headers and exhaust, 3200 Yank, EPS Cam, D1SC Procharger, all work performed by Blanchard Performance |
10-07-2012, 10:40 AM | #3 |
chevy pride
|
i would like to see this aswell lookin for some info aswell, i just order 200+ bucks in fittings and hose to clean up under the hood. but lookin to put a gauge on too
__________________
check out ky speeds fb page https://www.facebook.com/kyspeed |
10-07-2012, 09:50 PM | #4 |
Drives: 2011 Silver 2SS/RS L99 Join Date: Jul 2011
Location: Louisiana
Posts: 191
|
Nobody seems to want to help out
__________________
2011 2SS/RS L99
10.76@130.5 1.67 60' LG headers and exhaust, 3200 Yank, EPS Cam, D1SC Procharger, all work performed by Blanchard Performance |
10-08-2012, 11:32 AM | #5 |
Account Suspended
Drives: 930 Join Date: Apr 2012
Location: fl
Posts: 85
|
just about any elect nitrous pressure gauge will do its the nitrogen pressure that will give you a problem, i don't know what you have for a system but most will run 2500-3000 psi ansd there's elect 2 1/16 gauges for that. if you have a smaller system like the nano it will run at 1500 so you can get away with a nitrous pressure also
|
10-08-2012, 04:54 PM | #6 |
Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009
Location: Down South
Posts: 1,497
|
The NANO bottle comes with its own gauge(up to 6K) depending on 4.5K or 3K system. If you want to remote mount your nitrous gauge then get an electric one as stated above otherwise just put one on each bottle or "Y" them together.
__________________
2005 Dodge Ram 2500 RCSB Thunder Road Hemi Sport w/STS Turbo
2004 Dodge Ram SRT-10 - Silver - Stock 2003 Chevy 1500 RCSB Stepside 400SS - 408 in now awaiting Turbo |
10-11-2012, 07:22 AM | #7 |
Drives: 2011 Silver 2SS/RS L99 Join Date: Jul 2011
Location: Louisiana
Posts: 191
|
Thanks to Jay and SRT10 for the info. Yes, I have a NANO 4500 psi system. I want to remote mount inside the car so electric will be the way to go.
Thanks again.
__________________
2011 2SS/RS L99
10.76@130.5 1.67 60' LG headers and exhaust, 3200 Yank, EPS Cam, D1SC Procharger, all work performed by Blanchard Performance |
10-11-2012, 04:06 PM | #8 |
Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009
Location: Down South
Posts: 1,497
|
On the Black Hemi in my sig I put a remote nitrous pressure gauge because I put two 5lb bottles in the middle seat and "Y"ed them together. In case someone is sitting there I can still see the pressure without asking them to move or get up to lift the top and see the bottles.
__________________
2005 Dodge Ram 2500 RCSB Thunder Road Hemi Sport w/STS Turbo
2004 Dodge Ram SRT-10 - Silver - Stock 2003 Chevy 1500 RCSB Stepside 400SS - 408 in now awaiting Turbo |
|
|
|
|