The Birth of Brandi's Twins [COTW 8/8/11] - Page 90 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Darth_Emma · 07-22-2011, 02:50 PM

holy crap that's a big box!

*SSE 4 2SS* · 07-22-2011, 04:00 PM

Quote:

Originally Posted by Gotthat02fire

What is that cage certified for????? Bolt in correct???

With the six point roll bar, it's down to 10 seconds bolted in, but I also ordered the eight point add on and will weld the cage in so I'll be certified down to 8.5 second passes...

*SSE 4 2SS* · 07-22-2011, 04:02 PM

Quote:

Originally Posted by Darth_Emma

holy crap that's a big box!

That's what I was thinking, our sat Internet is really slow, I'm downloading a couple of other pics right now, and I'll post them up after dinner,,, it's six pm here, and I'm tired, long hard day...

Dangeruss · 07-22-2011, 04:07 PM

Quote:

Originally Posted by SSE 4 2SS

With the six point roll bar, it's down to 10 seconds bolted in, but I also ordered the eight point add on and will weld the cage in so I'll be certified down to 8.5 second passes...

Good call. Using only bolts to hold those in scares me.

garcmol · 07-22-2011, 06:06 PM

Are they gonna tear down your dash like they did with Speedster's car for the cage? Good luck on board out there. Praying for smooth seas, arrrrr...... Sea jargon (yeah I'd be the guy looking for a bucket of A.I.R.)

*mlee* · 07-22-2011, 06:13 PM

Quote:

Originally Posted by SSE 4 2SS

WooHoo,

My cage is at the shop,

Pics to follow as I recieve them...Hard to believe what's in the box will fit inside my Camaro...

They will make it fit... just wait til you see your car tore apart...

*SSE 4 2SS* · 07-23-2011, 04:01 AM

Quote:

Originally Posted by garcmol

Are they gonna tear down your dash like they did with Speedster's car for the cage? Good luck on board out there. Praying for smooth seas, arrrrr...... Sea jargon (yeah I'd be the guy looking for a bucket of A.I.R.)

Nope, no tearing down of the dash... On this kit, the down tubes run down right next to the dash... Thats why I want to see them in place before we weld them in. If I dont like the look, or it makes it too inconvienent to get in and out of the car, we may tear the dash down and go through there... Time will tell... The Six point roll bar may be mostly installed before I get home, but Corey is holding off on the halo and downtubes until I'm there to look at it... I wont be running that fast of a pass until I get my diff anyway...

Thanks for the well wishes on the weather... There is no whistling on this rig right now... whistling up a wind is a bad thing...

*SSE 4 2SS* · 07-23-2011, 04:06 AM

Here is a pic or two of the open box... Uhmmm... I'm excited to see it and wish I could help install it, but, I gotta pay for Brandi's upgrades, so....

Merc · 07-23-2011, 11:30 AM

Quote:

Originally Posted by SSE 4 2SS

Here is a pic or two of the open box... Uhmmm... I'm excited to see it and wish I could help install it, but, I gotta pay for Brandi's upgrades, so....

Nice.

Gotthat02fire · 07-23-2011, 12:06 PM

Well I'm more intrested now get your butt home so we can see this finished!!! Be safe looking forward to seeing this finished as I'm sure you are as well!!!!!

speedster · 07-23-2011, 08:45 PM

With all that tubing you could weld it to the top of Brandi and make you own Onshore Oil Rig... You'd feel right at home.

andredmg · 07-23-2011, 10:25 PM

That cage is extra sexy Im very jealous but you are definetly convincing me to put one in my whip, looks nasty!!!

Gotthat02fire · 07-23-2011, 10:31 PM

I don't know Randy an IOM cage in our Camaros make pepole pass out upon the site of our rides I going this route but excitied to see it welded in!!!!!!!!!!
P.S. some real flames on your roll cage would be hot as hell but what do I know!!!!!

Quote:

Originally Posted by andredmg

That cage is extra sexy Im very jealous but you are definetly convincing me to put one in my whip, looks nasty!!!

blade_ss · 07-24-2011, 08:34 PM

Quote:

Originally Posted by SSE 4 2SS

Here is a pic or two of the open box... Uhmmm... I'm excited to see it and wish I could help install it, but, I gotta pay for Brandi's upgrades, so....

nice cage, but according to the guys at Top Gear a proper road car should not have scaffulding in the back.

However you spell it?

07-22-2011, 06:06 PM	#1251
garcmol Drives: 10 1LT SIM; 91 B4C sleeper Z Join Date: Aug 2009 Location: Ft. Mitchell, Alabama Posts: 7,199	Are they gonna tear down your dash like they did with Speedster's car for the cage? Good luck on board out there. Praying for smooth seas, arrrrr...... Sea jargon (yeah I'd be the guy looking for a bucket of A.I.R.) __________________ Pedders Pace Car Package, Injen CAI, Flowmaster AT, AAC Lighting, ZL1 fascia/skirts, RKSport Ram Air hood, vented fenders, painted stripes (Gary's Customz), Honor and Valor badged (Thank you, John)

07-23-2011, 04:06 AM	#1254
SSE 4 2SS Boosted Moderator Drives: Bone Stock LS3 Join Date: Sep 2009 Location: Marion Tx Posts: 15,465	Here is a pic or two of the open box... Uhmmm... I'm excited to see it and wish I could help install it, but, I gotta pay for Brandi's upgrades, so.... Attached Images __________________ If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough...

07-23-2011, 12:06 PM	#1256
Gotthat02fire Drives: 2010 Camaro 1ss IOM Join Date: May 2009 Location: Williamsport,PA Posts: 2,246 View My Garage	Well I'm more intrested now get your butt home so we can see this finished!!! Be safe looking forward to seeing this finished as I'm sure you are as well!!!!! __________________ Jannetty Racing Built and Tuned 416 Maggie Max Package even better now!

07-23-2011, 08:45 PM	#1257
speedster SST... Drives: SST Camaro 2010 Join Date: Oct 2008 Location: East Coast of Florida Posts: 5,927 View My Garage	With all that tubing you could weld it to the top of Brandi and make you own Onshore Oil Rig... You'd feel right at home. __________________

07-23-2011, 10:25 PM	#1258
andredmg Big Nasty Drives: Chevys lots of em Join Date: Jun 2010 Location: Albuquerque NM Posts: 930	That cage is extra sexy Im very jealous but you are definetly convincing me to put one in my whip, looks nasty!!! __________________

07-22-2011, 02:50 PM	#1247
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	holy crap that's a big box!