New license plate and frame - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ryan's camaro · 10-03-2011, 12:42 AM

I got a High End Motorsport Camaro RS license plate for my new 2012 Camaro 2LT/RS. I screwed it all the way in and the plate is a bit bent outward where the Camaro rear end bends. I also plopped in the screwcaps for it. Is this normal? The bumper also bent a little when i pressed them in.

ryan's camaro · 10-03-2011, 04:33 PM

Is this normal? I was pressing the license plate frame screwcaps and the bumper was bending as I pressed it harder to snap into place. The license plate is also a bit bent out too. Is this from the way the license plate area on the bumper is bent?

The Stig · 10-03-2011, 05:13 PM

Pics? It would help if we could see how it's bent. How hard did you screw it in?

ryan's camaro · 10-03-2011, 05:49 PM

Quote:

Originally Posted by stieger

Pics? It would help if we could see how it's bent. How hard did you screw it in?

The bumper itself only bent like plastic would and came back to normal. The license plate is a bit warped outward. I screwed it in enough so that the screw is slightly firm to turn.

The Stig · 10-03-2011, 06:12 PM

Mk, well I wouldn't worry about the bumper, but if you're worried about the license plate you could take it off and try bending it back in place.

ryan's camaro · 10-03-2011, 11:18 PM

Quote:

Originally Posted by stieger

Mk, well I wouldn't worry about the bumper, but if you're worried about the license plate you could take it off and try bending it back in place.

The bumper didn't break or anything, but I never knew it was THAT flexible.
I hope there isn't damage or anything bad....

10-03-2011, 12:42 AM	#1
ryan's camaro Taeng Drives: Fast Join Date: Sep 2011 Location: USA Posts: 326 View My Garage	New license plate and frame I got a High End Motorsport Camaro RS license plate for my new 2012 Camaro 2LT/RS. I screwed it all the way in and the plate is a bit bent outward where the Camaro rear end bends. I also plopped in the screwcaps for it. Is this normal? The bumper also bent a little when i pressed them in. __________________

10-03-2011, 04:33 PM	#2
ryan's camaro Taeng Drives: Fast Join Date: Sep 2011 Location: USA Posts: 326 View My Garage	Is this normal? I was pressing the license plate frame screwcaps and the bumper was bending as I pressed it harder to snap into place. The license plate is also a bit bent out too. Is this from the way the license plate area on the bumper is bent? __________________

10-03-2011, 05:13 PM	#3
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Pics? It would help if we could see how it's bent. How hard did you screw it in? __________________

10-03-2011, 06:12 PM	#5
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Mk, well I wouldn't worry about the bumper, but if you're worried about the license plate you could take it off and try bending it back in place. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
California Laws and Regulation Information.	MikeL	USA - California	176	06-09-2019 11:14 AM
Cheap and Easily Removable License Plate Frame (no drilling required!)	MarylandSpeed	Camaro DIY & HOW-TO instructions & discussions	108	09-05-2016 01:24 PM
Swift Motor Sport Front License Plate Frame Install Explained	Xmicro_SS	Camaro DIY & HOW-TO instructions & discussions	44	07-06-2012 10:31 PM
FOUND PETITION TO GET RID OF FRONT PLATES	The_Beast_	USA - California	90	03-29-2012 12:54 AM
CGM w/ black or chrome license plate frame, what do you think?	Matt'sSS	Camaro Photos \| Spyshots \| Video \| Media Gallery	14	08-04-2009 03:11 PM