Fitech Sheet metal Low ram intake - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

yoteslayer · 04-30-2020, 03:29 PM

As the title says. Decided to sell my Fitech low ram manifold to put money towards other go fast parts. I’ve only had it on the car for about 6-7xx miles so it’s basically brand new. It will come with everything needed to do the swap. The intake, all gaskets, all hoses, vacuum lines with fittings, fuel rails and all hardware, as well as a custom 6AN braided fuel feed line with a QD adapter so it will work with existing factory gm metal fuel lines. It’ll also have the fuel rail cross over. Like I said before, everything you need for the swap will be included. My asking price is $500 shipped firm. May be interested in trades depending on what you have. Thanks.

olblue75 · 04-30-2020, 08:09 PM

What kinda power did it make an what supporting mods??

yoteslayer · 04-30-2020, 08:36 PM

Never had the car on a dyno. My car as of right now is just a full bolt on car, I can tell you however that there was a noticeable difference in the upper power band. It's very similar to the Holley Sniper EFI low pro intake, almost a replica.

yoteslayer · 05-01-2020, 03:14 PM

TTT

IKILLEDSUPERMAN_ZL1 · 05-01-2020, 03:16 PM

GLWS but i see your in the same city as i am. Cool

yoteslayer · 05-01-2020, 04:16 PM

Shit we’ve probably seen each other out! I’m in the all black SS with the yellow 6 piston V brakes. You getting out tonight?

IKILLEDSUPERMAN_ZL1 · 05-01-2020, 04:37 PM

Yeah. I might. I've heard alot of racing in "Mexico " out west.

yoteslayer · 05-04-2020, 02:49 PM

To the top.

Ahallman · 05-13-2020, 12:31 PM

PM sent

yoteslayer · 05-13-2020, 05:46 PM

Quote:

Originally Posted by Ahallman

PM sent

I replied to your PM.

yoteslayer · 05-15-2020, 10:26 AM

Sold!

04-30-2020, 03:29 PM	#1
yoteslayer Drives: 2013 Camaro 2SS/RS M6 Join Date: Oct 2019 Location: Wichita, Kansas Posts: 58	Fitech Sheet metal Low ram intake As the title says. Decided to sell my Fitech low ram manifold to put money towards other go fast parts. I’ve only had it on the car for about 6-7xx miles so it’s basically brand new. It will come with everything needed to do the swap. The intake, all gaskets, all hoses, vacuum lines with fittings, fuel rails and all hardware, as well as a custom 6AN braided fuel feed line with a QD adapter so it will work with existing factory gm metal fuel lines. It’ll also have the fuel rail cross over. Like I said before, everything you need for the swap will be included. My asking price is $500 shipped firm. May be interested in trades depending on what you have. Thanks. Attached Images __________________ 2013 Camaro 2SS/RS M6 Stock(motor wise, for now) CTS-V big brakes and a bunch of Hotchkis supsension bits.

04-30-2020, 08:09 PM	#2
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,064	What kinda power did it make an what supporting mods?? __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

04-30-2020, 08:36 PM	#3
yoteslayer Drives: 2013 Camaro 2SS/RS M6 Join Date: Oct 2019 Location: Wichita, Kansas Posts: 58	Never had the car on a dyno. My car as of right now is just a full bolt on car, I can tell you however that there was a noticeable difference in the upper power band. It's very similar to the Holley Sniper EFI low pro intake, almost a replica. __________________ 2013 Camaro 2SS/RS M6 Stock(motor wise, for now) CTS-V big brakes and a bunch of Hotchkis supsension bits.

05-01-2020, 03:14 PM	#4
yoteslayer Drives: 2013 Camaro 2SS/RS M6 Join Date: Oct 2019 Location: Wichita, Kansas Posts: 58	TTT __________________ 2013 Camaro 2SS/RS M6 Stock(motor wise, for now) CTS-V big brakes and a bunch of Hotchkis supsension bits.

05-01-2020, 03:16 PM	#5
IKILLEDSUPERMAN_ZL1 Drives: 2011 Camaro SS Join Date: Jul 2017 Location: Wichita,KS Posts: 603	GLWS but i see your in the same city as i am. Cool __________________ 2011 Camaro 2SS, 6.0 iron block forged bottom end, Dart heads, BTR intake, Huron twin turbo kit, Summit stage 3 twin turbo cam, Circle D stage 4 6L90, 3800 FTI converter. BMR suspension, Viking coil overs, Fore triple pump fuel system.

05-01-2020, 04:16 PM	#6
yoteslayer Drives: 2013 Camaro 2SS/RS M6 Join Date: Oct 2019 Location: Wichita, Kansas Posts: 58	Shit we’ve probably seen each other out! I’m in the all black SS with the yellow 6 piston V brakes. You getting out tonight? __________________ 2013 Camaro 2SS/RS M6 Stock(motor wise, for now) CTS-V big brakes and a bunch of Hotchkis supsension bits.

05-01-2020, 04:37 PM	#7
IKILLEDSUPERMAN_ZL1 Drives: 2011 Camaro SS Join Date: Jul 2017 Location: Wichita,KS Posts: 603	Yeah. I might. I've heard alot of racing in "Mexico " out west. __________________ 2011 Camaro 2SS, 6.0 iron block forged bottom end, Dart heads, BTR intake, Huron twin turbo kit, Summit stage 3 twin turbo cam, Circle D stage 4 6L90, 3800 FTI converter. BMR suspension, Viking coil overs, Fore triple pump fuel system.

05-04-2020, 02:49 PM	#8
yoteslayer Drives: 2013 Camaro 2SS/RS M6 Join Date: Oct 2019 Location: Wichita, Kansas Posts: 58	To the top. __________________ 2013 Camaro 2SS/RS M6 Stock(motor wise, for now) CTS-V big brakes and a bunch of Hotchkis supsension bits.

05-13-2020, 12:31 PM	#9
Ahallman Drives: 2010 Chevrolet Camaro 2SS Join Date: Mar 2020 Location: Spartanburg, SC Posts: 38	PM sent

05-15-2020, 10:26 AM	#11
yoteslayer Drives: 2013 Camaro 2SS/RS M6 Join Date: Oct 2019 Location: Wichita, Kansas Posts: 58	Sold! __________________ 2013 Camaro 2SS/RS M6 Stock(motor wise, for now) CTS-V big brakes and a bunch of Hotchkis supsension bits.