02-26-2010, 05:44 AM | #1 |
Drives: 2012 Challenger SRT8 Auto Join Date: Sep 2009
Location: Central New Jersey
Posts: 839
|
Where to set Stoich for E10 in HPTuners
I'd like to set my Stoich AFR in HPTuners and living in Jersey we are "up to" E10 for pump gas. I know the table that has to be updated and have included it here below, the far left cell gets updated but do I have to update anything to the right of it? Also, for anyone that is doing the same, are you just setting Stoich to 14.137 or going a little bit higher like 14.25 or 14.3 because it is "up to" E10. I know this is being a little picky but so be it...Thanks in advance...
__________________
"When the people find they can vote themselves money, that will herald the end of the republic." - Benjamin Franklin LS3 Camshaft Swap Do-It-Yourself Instructions - 2010 LS3 gone but not forgotten!!! |
02-26-2010, 06:32 AM | #2 |
Drives: 2010 Camaro Join Date: Jul 2009
Location: Long Island
Posts: 244
|
I believe you are right and only the first cell is referenced by the computer, I just played it safe and updated the entire row though, it doesn't hurt.
Your best bet is to just split the difference and set the stoich to 14.4.
__________________
Mods: TVS2300, 3.2 pulley, American Racing Headers, Custom Cam, Coil Overs, Tuned for E85, 610RWHP* 570RWTQ
Follow me on Twitter www.e85lsx.com |
02-26-2010, 12:57 PM | #3 | |
Drives: 2012 Challenger SRT8 Auto Join Date: Sep 2009
Location: Central New Jersey
Posts: 839
|
Quote:
As for a WOT target with E10, I have seen the 11.9-12.0 range mentioned for an N/A vehicle as opposed to the 12.4-12-6 based on E0 so I am assuming a split the difference target would be 12.2ish.
__________________
"When the people find they can vote themselves money, that will herald the end of the republic." - Benjamin Franklin LS3 Camshaft Swap Do-It-Yourself Instructions - 2010 LS3 gone but not forgotten!!! |
|
02-26-2010, 01:44 PM | #4 | |
Drives: 550+RWHP 2010 camaro Join Date: Sep 2007
Location: wisconsin
Posts: 1,588
|
Quote:
the other parameters to the right are for vehicles that have flex fuel option enabled,, the camaro OS is not a flex fuel file,, but it shares many tables with many gm gen4 engines that do have flex fuel
__________________
415ci stroker, TVS 2300 Magnacharger, cnc heads, cam, yank ss3200 converter, Kooks long tubes, Bwoody true cold air kit, ZL1 Pump, magnaflow 3" cat-back, lowering springs,BMR control arms and tie rod bars, 3.73 gears, diff mounts, RX can, ADM fuel controller
|
|
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stealth Performance--Kooks Headers and Off-Road Pipes--1 set left--Special Installed! | Torchdvette | USA - Texas | 0 | 09-01-2009 10:33 PM |
Alignments and Chassis set up | JANNETTYRACING | Wheels and Tires Talk Sponsored by The Tire Rack | 0 | 08-30-2009 11:16 AM |
Dynatech Supermaxx Headers w/ Cats--1 set left in stock, special install price!! | Torchdvette | V8 Bolt-Ons & Tunes | 0 | 08-29-2009 02:51 PM |
OK...the camaros are being delivered...What's the off set?! | NightmareSS | Wheels and Tires Talk Sponsored by The Tire Rack | 7 | 04-21-2009 10:17 PM |