Any other members in Hawaii?

[HEAVYCHEVY10]

Have stock ls3 fuel rails, valve covers with brackets

[GetSmart]

Originally Posted by sting808

Anyone got a stock SS exhaust laying around? Willing to part with the axel back mufflers?

Yah i might have them, have to check my storage.

[HEAVYCHEVY10]

Have manifolds and cats from a 2014 SS as well

[sting808]

Everyone, Thanks for the info for the mufflers. Hope jake will let me have it without milking me for them. Like to see how much softer Catted LT with OE mufflers will sound. My LTs came so much louder after FI.

Taz, good to see your around.... With same car?

Ever get your final engine setup finished?

[sting808]

anyone need
OE radiator, rear LCA, OE shocks/strut, swaybars, oe intake parts(air box to manifold)

2010 polished SS wheels with <500 miles on them. Rear 20x9 has old nitto invos on them

Running out of space...

[HEAVYCHEVY10]

Originally Posted by sting808

Everyone, Thanks for the info for the mufflers. Hope jake will let me have it without milking me for them. Like to see how much softer Catted LT with OE mufflers will sound. My LTs came so much louder after FI.

Taz, good to see your around.... With same car?

Ever get your final engine setup finished?

If you want the manifolds an cars let me know ! I ain't gonna charge much for them I wanna clear out my garage.

[sting808]

I want to keep my LTs, but try and get the exhaust a little more quiet. I run at upper limit of noise level for auto-x rules. Thanks anyways.

[TURBOJ]

Originally Posted by sting808

I want to keep my LTs, but try and get the exhaust a little more quiet. I run at upper limit of noise level for auto-x rules. Thanks anyways.

Are you still looking for stock mufflers?

[sting808]

Originally Posted by TURBOJ

Are you still looking for stock mufflers?

Yes. I just need little before the pumkin to the tailpipes.

Supposedly, if I cut them right, they'll slip into the ARH system. I'd like to see if the car runs quieter than the ARH mufflers I'm using. WOT revs measure +114 db at 3 feet. Luckily, I'm not a heavy foot driver past 1/4 throttle, most of the time.

Once, I got a warning at a SCCA events at 98db on some straight sections. If you exceed 100 db and a second pass, you can get disqualified for the runs. Our local SCCA chapter is following national standards and trying to keep good relationships with the Stadium and neighborhood.

[TURBOJ]

Originally Posted by sting808

Yes. I just need little before the pumkin to the tailpipes.

Supposedly, if I cut them right, they'll slip into the ARH system. I'd like to see if the car runs quieter than the ARH mufflers I'm using. WOT revs measure +114 db at 3 feet. Luckily, I'm not a heavy foot driver past 1/4 throttle, most of the time.

Once, I got a warning at a SCCA events at 98db on some straight sections. If you exceed 100 db and a second pass, you can get disqualified for the runs. Our local SCCA chapter is following national standards and trying to keep good relationships with the Stadium and neighborhood.

I still have my stock exhaust, but you have to pick it up in Kaneohe. LMK

[sting808]

Originally Posted by TURBOJ

I still have my stock exhaust, but you have to pick it up in Kaneohe. LMK

Thx. PMd

[HEAVYCHEVY10]

Is there a place I can scrap cats out here ? I wanna get rid of some stuff but can't bring my self to throw it away.

[Mattman1121]

Does anybody know a place they sell Camaro Now magazine out here?

[HEAVYCHEVY10]

Stock head unit if anyone needs one