You are browsing camaro5 
 |
|
08-13-2016, 07:59 PM
|
#1 |
 
Drives: 2013 ZL1 VERT M6 Join Date: May 2013
Location: Portland, Maine
Posts: 346
|
Fuel Pressure Sensor locaton
Just looking for help on hooking up a fuel pressure gauge and was wondering where on the fuel rail can you hook up a fuel sensor.
I would prefer not to cut up my engine cover trying to do this. Anyone that has hooked up one please feel free to chime in and any pictures would be awesome. Thanks
__________________
JANNETTY RACING 750 ROUGH IDLE CAM PACKAGE
(681 RWHP & 643 RWTQ) = 783 CRANK HP & 740 CRANK TQ |
|
|
|
08-14-2016, 11:34 AM
|
#2 |
Drives: 2014 ZL1- Summit White M6 Join Date: Aug 2014
Location: Thornton, Colorado
Posts: 462
|
Could attach to the shrader valve I'm sure, but might be hood clearance issues and no cover after that.
Next option is to replace the factory feed line with a new line and AN fittings and clips. Put a gauge in that line or fore sells a fitting that has a gaugue port in it like this http://www.foreinnovations.com/produ...-an8-npt18.htm
__________________
750whp @ 13psi Garage Built on Jack Stands.. 850++ 100 shot of sauce
 |
|
|
|
|
08-14-2016, 06:41 PM
|
#3 | |
|
Drives: 2013 ZL1 VERT M6 Join Date: May 2013
Location: Portland, Maine
Posts: 346
|
Quote:
I might have to replace the feed line, as the shrader valve is right under the engine cover and support brace.
__________________
JANNETTY RACING 750 ROUGH IDLE CAM PACKAGE
(681 RWHP & 643 RWTQ) = 783 CRANK HP & 740 CRANK TQ |
|
|
|
|
|
08-18-2016, 09:22 PM
|
#4 |
|
Get Some
Drives: 2014 ZL1 6Speed Join Date: Mar 2012
Location: The Wood's Edge, NM
Posts: 712
|
yearwood! Paid like $30. 5 minute install.
http://yearwoodperformance.com/p-4848-shop-parts.html
__________________
|
|
|
|
|
08-18-2016, 09:22 PM
|
#5 |
|
Get Some
Drives: 2014 ZL1 6Speed Join Date: Mar 2012
Location: The Wood's Edge, NM
Posts: 712
|
Nitrous Express Part# 16185
__________________
|
|
|
|
|
08-21-2016, 08:45 AM
|
#6 | |
|
Drives: 2013 ZL1 VERT M6 Join Date: May 2013
Location: Portland, Maine
Posts: 346
|
PERFECT
Quote:
  
__________________
JANNETTY RACING 750 ROUGH IDLE CAM PACKAGE
(681 RWHP & 643 RWTQ) = 783 CRANK HP & 740 CRANK TQ |
|
|
|
|
|
08-21-2016, 09:08 PM
|
#7 | |
|
Drives: 2013 ZL1 VERT M6 Join Date: May 2013
Location: Portland, Maine
Posts: 346
|
Quote:
Russell fitting #799-640730 
__________________
JANNETTY RACING 750 ROUGH IDLE CAM PACKAGE
(681 RWHP & 643 RWTQ) = 783 CRANK HP & 740 CRANK TQ |
|
|
|
|
|
09-01-2016, 11:34 AM
|
#8 |
|
Get Some
Drives: 2014 ZL1 6Speed Join Date: Mar 2012
Location: The Wood's Edge, NM
Posts: 712
|
That is the one I have. I couldn't find a pic of it. Bought it at Yearwood performance. Works perfectly.
__________________
|
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
