09-07-2009, 08:25 PM | #1 |
Wait'ns the hardest part
|
Another MBRP Install
I installed my MBRP exhaust today. I got the the 304 stainless steel version.
I installed it in my garage with the car on ramps and jack stands. It took me a little less that 2.5 hours to get it done. If I had to do it again I could probably do it in a little over an hour. It was fairly easy to do just took some fanagling here and there but overall it went very well. I am very pleased with the sound so far. Its just the right amount of rumble without being obnoxious. I have not had time to do a ton of driving yet and have not been on the highway. We'll see how the drive to work goes tomorrow. I have attached a few pix I took during the install.
__________________
2LT/RS Black/Black, Manual with Polished AL Wheels
Order #NKNB5D Vin: 2G1FG1EV7A9132544 1100 - 06/09/2009 | 2000 - 06/18/2009 | 2500 - 06/23/2009 | 3000 - 06/24/2009 3100 - 07/14/2009 | 3300 - 07/14/2009 | 3400 - 07/25/2009 | 3800 - 08/04/2009 4B00 - 08/05/2009 | 4100 - 08/06/2009 | 4200 - 08/08/2009 | 5000 - 08/20/2009 |6000 - 08/22/2009 Target Production Week:Originally: 7/27, pushed to 8/10 then back to 7/27 |
09-07-2009, 08:29 PM | #2 | |
Drives: 2010 1LT/RS Join Date: Aug 2009
Location: Lexington, KY
Posts: 325
|
Quote:
|
|
09-07-2009, 08:38 PM | #3 |
Drives: 2010 blk 2SS RS polished wheel Join Date: Mar 2009
Location: Sylvester Georgia
Posts: 158
|
Sound clip please.
|
09-07-2009, 08:38 PM | #4 |
San Diego Head Tuners
Drives: 2016 Camaro 1SS ,NPP,MagRide, A8 Join Date: May 2009
Location: Temecula, CA
Posts: 2,440
|
Nice job, looks great
__________________
2016 1SS A8, NPP, MagRide, Black Rims
My 5th Camaro (3 Gen5, 1 Gen4) Member of San Diego Head Tuners https://www.youtube.com/c/MojaveKY https://www.instagram.com/mojaveky/ https://twitter.com/MojaveKY http://dinowax.refr.cc/bryanm 15% off DinoWax orders |
09-07-2009, 09:05 PM | #5 |
Account Suspended
Drives: 2010 Camaro Rally Yellow 2LT Join Date: Aug 2009
Location: Smithtown, NY
Posts: 689
|
SWEET!!
Easy install and you'll love the sound at wide open throttle. Good luck with it. |
09-08-2009, 06:32 AM | #6 |
Drives: Sedan & 2SS / RS Join Date: Jun 2009
Location: Florida
Posts: 377
|
__________________
Drives: 2012 2SS/Black/RS/A6
|
09-08-2009, 06:35 AM | #7 |
Wait'ns the hardest part
|
Sorry - I won't have time to do this any time too soon. There are other threads with sound clips for this system.
__________________
2LT/RS Black/Black, Manual with Polished AL Wheels
Order #NKNB5D Vin: 2G1FG1EV7A9132544 1100 - 06/09/2009 | 2000 - 06/18/2009 | 2500 - 06/23/2009 | 3000 - 06/24/2009 3100 - 07/14/2009 | 3300 - 07/14/2009 | 3400 - 07/25/2009 | 3800 - 08/04/2009 4B00 - 08/05/2009 | 4100 - 08/06/2009 | 4200 - 08/08/2009 | 5000 - 08/20/2009 |6000 - 08/22/2009 Target Production Week:Originally: 7/27, pushed to 8/10 then back to 7/27 |
09-08-2009, 08:53 AM | #8 |
Drives: 2016 & 1967 Camaro, 2015 Impala, +1 Join Date: Jul 2009
Location: New York
Posts: 1,165
|
|
09-08-2009, 04:09 PM | #9 | |
Red Brick of Vengeance!
Drives: 12 Second Brick Join Date: Jun 2009
Location: at my pulpit
Posts: 7,745
|
Quote:
Like some one told me... you can never have too many video clips!!! LOL
__________________
|
|
09-09-2009, 07:05 AM | #10 |
Wait'ns the hardest part
|
Yeah, I know, its just a busy time for the kids, etc and I need to get more tape for the camera (Y, old fashion tape )
__________________
2LT/RS Black/Black, Manual with Polished AL Wheels
Order #NKNB5D Vin: 2G1FG1EV7A9132544 1100 - 06/09/2009 | 2000 - 06/18/2009 | 2500 - 06/23/2009 | 3000 - 06/24/2009 3100 - 07/14/2009 | 3300 - 07/14/2009 | 3400 - 07/25/2009 | 3800 - 08/04/2009 4B00 - 08/05/2009 | 4100 - 08/06/2009 | 4200 - 08/08/2009 | 5000 - 08/20/2009 |6000 - 08/22/2009 Target Production Week:Originally: 7/27, pushed to 8/10 then back to 7/27 |
09-09-2009, 07:07 AM | #11 |
Wait'ns the hardest part
|
So, after a few days of driving I have to say that I am pretty happy with the sound and feel of the car with this exhaust. Feels great off the line and has a nice low note (not overly loud) cruising on the highway.
Nice job MBRP - and thanks to Jeff at MBRP for his responsiveness to my inquiries.
__________________
2LT/RS Black/Black, Manual with Polished AL Wheels
Order #NKNB5D Vin: 2G1FG1EV7A9132544 1100 - 06/09/2009 | 2000 - 06/18/2009 | 2500 - 06/23/2009 | 3000 - 06/24/2009 3100 - 07/14/2009 | 3300 - 07/14/2009 | 3400 - 07/25/2009 | 3800 - 08/04/2009 4B00 - 08/05/2009 | 4100 - 08/06/2009 | 4200 - 08/08/2009 | 5000 - 08/20/2009 |6000 - 08/22/2009 Target Production Week:Originally: 7/27, pushed to 8/10 then back to 7/27 |
09-09-2009, 01:33 PM | #12 |
|
Just got mine installed this morning. Sounds great, love it and I can definitely feel more there off the line. A tad raspy at high RPMs but hey, it's a V6, a leopard can't change it's spots. Completely satisfied.
Question for you guys though, did ya'll mail in the warranty? How much postage has to go on that to get to Ontario? I've never mailed anything out of country. |
09-09-2009, 01:37 PM | #13 | |
Wait'ns the hardest part
|
Quote:
I haven't sent the warranty card yet...
__________________
2LT/RS Black/Black, Manual with Polished AL Wheels
Order #NKNB5D Vin: 2G1FG1EV7A9132544 1100 - 06/09/2009 | 2000 - 06/18/2009 | 2500 - 06/23/2009 | 3000 - 06/24/2009 3100 - 07/14/2009 | 3300 - 07/14/2009 | 3400 - 07/25/2009 | 3800 - 08/04/2009 4B00 - 08/05/2009 | 4100 - 08/06/2009 | 4200 - 08/08/2009 | 5000 - 08/20/2009 |6000 - 08/22/2009 Target Production Week:Originally: 7/27, pushed to 8/10 then back to 7/27 |
|
09-09-2009, 03:17 PM | #14 | |
Manufacture
Drives: Camaro Join Date: May 2009
Location: Huntsville
Posts: 124
|
Quote:
Glad to hear that you're all set up now...as for the warranty cards, as long as you keep your proof of purchase, regardless if it was directly from us or a dealer your good to go if ever needed. You can just throw the warranty card in the mail if you want, but it's not completely necessary.
__________________
Jeff Carr Sales & Special Events Coordinator MBRP Inc. Performance Exhaust 1-888-636-7223 www.mbrp.com] |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY : Install underdrive pulley on 2010 Camaro SS | Nine Ball | Camaro DIY & HOW-TO instructions & discussions | 34 | 09-30-2013 08:25 PM |
MBRP On my L99/A6 | JoshJ81 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 47 | 08-30-2010 02:27 PM |
How to Install QTP Electric Cutouts | Quick Time | Camaro DIY & HOW-TO instructions & discussions | 73 | 05-03-2010 12:19 PM |
DIY : Install catback on 2010 Camaro SS | Nine Ball | Camaro DIY & HOW-TO instructions & discussions | 3 | 08-09-2009 04:36 PM |
MBRP Performance Exhaust for Camaro SS $1099.88 @ BMC Performance | Kris@BMCPerformance | V8 Bolt-Ons & Tunes | 1 | 08-08-2009 08:27 PM |