X1 + X2 Harness Interest

[Texzen]

Originally Posted by Moriartii

...
6. Texzen - X1, X2 and X3

Make that X1 and X2, ordered my X3 today!

[Shown_nuff]

count me in for both

[pnyklr]

I know what the X3 is for but what are the X1 and X2 for?

-Funk

[Moriartii]

Pnyklr-
X1 - provides power, ground and lowend bass for the 6x9 speakers
X2 - provides connections for all speaker wiring except for lowend bass which is in X1
X3 - provides low end (signal from head unit) to amp.

[papacueball]

I ordered the X3 yesterday, so I would need just the X1 and X2.

[EME 129]

I ordered the X3 today, and very interested in the X1 and X2

[1977and2010]

I've got the X3, and count me in on the X1 and X2 too.

[JEFF2010SSMANUAL]

I am curious how the OEM Boston system works, I have ALOT of experience in car

audio and would like to know how the center speaker is set-up? I just ordered

the sub harness that has the phono out and turn-on lead. Its so darn easy with

the battery in the trunk. I have $2k worth of parts from my last car, but I didn't

want to hack-up my Camaro wires and add 150 pounds in the trunk. These new

harnesses for the speakers is very interesting. Is the Boston amp just a 4 channel

stereo amp, or is it a 5 channel to include the center ?




I did decide to build a small sealed box (3/4" MDF) for 1 of my Diamond subs. 900WRMS at 4 ohms

will have to suffice.

[Texzen]

Originally Posted by JEFF2010SSMANUAL

It the Boston amp just a 4 channel

stereo amp, or is it a 5 channel to include the center ?...

It's a 5 channel amp

[Hupperware]

I'd be in for an X1, X2...

What about inline switch to delete the center channel?

[Moriartii]

Originally Posted by Texzen

It's a 5 channel amp

T-
I think it is more than a 5 channel. If you look at the schematic the rear mids are split so I think it is actually like a 7 channel?
Cheers
K

[Texzen]

Originally Posted by Moriartii

T-
I think it is more than a 5 channel. If you look at the schematic the rear mids are split so I think it is actually like a 7 channel?
Cheers
K

agreed

[Steve@Subthump]

Originally Posted by Hupperware

I'd be in for an X1, X2...

What about inline switch to delete the center channel?

you wouldn't need a swich. Just don't hook it up. Most guys will put in a 4 channel amp, so you'd wire the front components and rear 6x9s (leaving the rear tweeters unhooked as well because they don't do jack)

I could actually have the harness built without those wires (center speaker and rear tweets), but I'd probably get someone bitchin that they need to be able to wire up the center speaker for whatever reason so it's best to have all wires present.

[Alfieboy]

Originally Posted by Steve@********

you wouldn't need a swich. Just don't hook it up. Most guys will put in a 4 channel amp, so you'd wire the front components and rear 6x9s (leaving the rear tweeters unhooked as well because they don't do jack)

I could actually have the harness built without those wires (center speaker and rear tweets), but I'd probably get someone bitchin that they need to be able to wire up the center speaker for whatever reason so it's best to have all wires present.

lol...
I have the original Sub add (x3).. so Imma guessing Steve will lemme know when th ex1,x2 availble..
TY

maybe I should just add a 6 channel amp..lmao..