Seal your glass for up to 30k miles with Gtechniq G1! - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CPT_Hoolie · 08-03-2012, 09:20 AM

Just finished sealing my windows with the Gtechniq.

Cleaned the windows with Adam's Glass Cleaner.

Polished with the G4 and an Adam's Flip Pad using the orange side. The G4 works really well. The glass looked fantastic after polishing and buffing. (I made sure to treat the plastics & trim with VRT or equivalent to prevent the polish residue from discoloring, same as any other wax or polish).

The G1 goes on very easily. The only thing: I wish the applicators were a bit bigger -- it takes a lot of small circles using a 1" diameter applicator to cover a windshield. I wonder if a microfiber applicator would make it easier or if the microfiber would soak up too much of the G1.

I concur that there's enough in the 15ml bottle to do 1 large car or SUV. For the Camaro I had enough left over to probably treat my wife's car's windshield (only).

For removal, IPA is definitely the way to go. I dampened a soft microfiber with the IPA and the residue came right off. I didn't even mess with the G2.

Now to wait for it to rain & see how it does.

Todd@Autopia · 08-03-2012, 09:52 AM

Quote:

Originally Posted by CPT_Hoolie

Just finished sealing my windows with the Gtechniq.

Cleaned the windows with Adam's Glass Cleaner.

Polished with the G4 and an Adam's Flip Pad using the orange side. The G4 works really well. The glass looked fantastic after polishing and buffing. (I made sure to treat the plastics & trim with VRT or equivalent to prevent the polish residue from discoloring, same as any other wax or polish).

The G1 goes on very easily. The only thing: I wish the applicators were a bit bigger -- it takes a lot of small circles using a 1" diameter applicator to cover a windshield. I wonder if a microfiber applicator would make it easier or if the microfiber would soak up too much of the G1.

I concur that there's enough in the 15ml bottle to do 1 large car or SUV. For the Camaro I had enough left over to probably treat my wife's car's windshield (only).

For removal, IPA is definitely the way to go. I dampened a soft microfiber with the IPA and the residue came right off. I didn't even mess with the G2.

Now to wait for it to rain & see how it does.

Good to hear, cannot wait to see your results! (Well read about them!)

the rich dude · 08-03-2012, 03:03 PM

Definitely keeping an eye on this product and the rest of the Gtechniq stuff for that matter. Would be nice to use a glass sealer that even lasted a year. 30K would just be a bonus!!

ChrisBlair · 08-03-2012, 04:28 PM

Quote:

Originally Posted by CamaroDreams07

--When was the last time you read the Constitution?--

Dirty glass is a pet peeve of mine. I despise cloudy dirty glass. I've pulled over to clean my glass.

I don't recall when the last time I read the constitution was. But I've been on the USS Constitution many times. And I can recite the Preamble from memory

But I don't know what that has to do with glass

lscamaro · 08-03-2012, 07:07 PM

That's his signature if I'm not mistaken

Smirnoff · 08-03-2012, 07:14 PM

How much is this stuff....????

CamaroDreams07 · 08-03-2012, 07:53 PM

Quote:

Originally Posted by lscamaro

That's his signature if I'm not mistaken

Yes sir, used to be my Tapatalk sig. Haha

*In life, there are no nandroids*

CamaroDreams07 · 08-03-2012, 07:54 PM

Quote:

Originally Posted by Smirnoff

How much is this stuff....????

About forty bucks if I remember.

*In life, there are no nandroids*

jeffny09 · 08-03-2012, 11:24 PM

Is just paid 30 from Todd don't forget the glass polish like I did

Billabongi · 08-04-2012, 09:28 PM

Todd, do you guys apply this or just sell it? I'm always over in the Orlando area

Todd@Autopia · 08-06-2012, 01:18 PM

Quote:

Originally Posted by Billabongi

Todd, do you guys apply this or just sell it? I'm always over in the Orlando area

Just sell it. Now I could apply it for you but then you would have to pay me too

Todd@Autopia · 09-07-2012, 12:11 PM

Here is a quick update after 2 months (I thought it was 3 when I made the video)

Rangore · 09-07-2012, 12:29 PM

This stuff sounds interesting.

I've been using the same wax on my glass that I do on my car. Just apply it each time I wax.

08-03-2012, 09:20 AM	#26
CPT_Hoolie Drives: 2012 1LT RS Join Date: Apr 2012 Location: Texas Posts: 46 View My Garage	Just finished sealing my windows with the Gtechniq. Cleaned the windows with Adam's Glass Cleaner. Polished with the G4 and an Adam's Flip Pad using the orange side. The G4 works really well. The glass looked fantastic after polishing and buffing. (I made sure to treat the plastics & trim with VRT or equivalent to prevent the polish residue from discoloring, same as any other wax or polish). The G1 goes on very easily. The only thing: I wish the applicators were a bit bigger -- it takes a lot of small circles using a 1" diameter applicator to cover a windshield. I wonder if a microfiber applicator would make it easier or if the microfiber would soak up too much of the G1. I concur that there's enough in the 15ml bottle to do 1 large car or SUV. For the Camaro I had enough left over to probably treat my wife's car's windshield (only). For removal, IPA is definitely the way to go. I dampened a soft microfiber with the IPA and the residue came right off. I didn't even mess with the G2. Now to wait for it to rain & see how it does. __________________ 2012 1LT RS SW 15MAR12 purchased 22MAR12 Custom stripe install 25APR12 Installed CAI intake / ADM scoop / Roto-Fab windshield washer relocation 02MAY12 Installed RX Catch Can ...MORE TO FOLLOW "Life's full of ironies, if you're stupid." -- P.J. O'Rourke

08-03-2012, 07:07 PM	#30
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 5,945	That's his signature if I'm not mistaken __________________ Current Mods: Vararam \| Borla ProXS Custom Axle-Back \| Mace 25mm Insulator \| MACE Ported Intake Manifold \| And a few other things Click here to visit my Build Thread!

08-03-2012, 07:14 PM	#31
Smirnoff Drives: Camaro SS Join Date: Mar 2010 Location: Motorcity Dragway Posts: 716	How much is this stuff....???? __________________ No china cheap bolt-on's, drywall, buffet, or yubiwaza here.....平的

08-03-2012, 11:24 PM	#34
jeffny09 Drives: 2010 camaro Join Date: Nov 2008 Location: new york Posts: 5,704	Is just paid 30 from Todd don't forget the glass polish like I did __________________ top 10 reason why real men drive stick. 10. A manual transmission is the ultimate in control 9. You can use automotive jargon and not sound like a total tool 8. You can't spell "manual" without "man" 7. Manual transmissions prove you can do more than one thing at a time 6. You can't drift in an auto 5. You can't pull fancy moves in an automatic 4. You get better fuel economy with a stick 3. You’ll never look like a chump if you can drive stick 2. Manual transmission cars are faster 1. Women like a guy who is good with his hands.

09-07-2012, 12:29 PM	#38
Rangore Drives: 2010 Camaro 2LT Cyber Gray Join Date: Oct 2011 Location: Minnesota Posts: 1,960	This stuff sounds interesting. I've been using the same wax on my glass that I do on my car. Just apply it each time I wax. __________________ Current: 2010 Camaro 2LT - Current Mods: EGA on left and right windows - Solo CAT Back - Black CAI - Black Carbon Fiber Bow-tie Vinyl - Switchback LED Turn Signal bulbs - HOD Headlight bulbs - Aqua interior LED bulb No longer owned: 1993 Camaro Z-28

08-03-2012, 03:03 PM	#28
the rich dude Drives: Getting 2010 Camaro Join Date: Jul 2008 Location: Vancouver Posts: 977	Definitely keeping an eye on this product and the rest of the Gtechniq stuff for that matter. Would be nice to use a glass sealer that even lasted a year. 30K would just be a bonus!!

08-04-2012, 09:28 PM	#35
Billabongi Drives: 2LT\RS IOM Camaro Join Date: Apr 2012 Location: Florida Posts: 268	Todd, do you guys apply this or just sell it? I'm always over in the Orlando area